The macro MIN, MAX is defined as the aliase of min, max, respectively.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---
Changes in v2: - Rebase on commit 9170818a4e004
arch/arm/cpu/arm1176/tnetv107x/clock.c | 2 +- arch/arm/cpu/armv7/mx6/ddr.c | 40 +++++++++++++++++----------------- arch/x86/lib/physmem.c | 4 ++-- board/freescale/common/ics307_clk.c | 2 +- drivers/dma/fsl_dma.c | 2 +- drivers/i2c/ihs_i2c.c | 4 ++-- drivers/mmc/fsl_esdhc.c | 2 +- drivers/serial/usbtty.c | 4 ++-- drivers/usb/gadget/designware_udc.c | 4 ++-- drivers/usb/gadget/ep0.c | 2 +- drivers/usb/gadget/mpc8xx_udc.c | 4 ++-- drivers/usb/gadget/pxa27x_udc.c | 2 +- fs/zfs/zfs.c | 6 ++--- 13 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c index 3708b6f..47c23bb 100644 --- a/arch/arm/cpu/arm1176/tnetv107x/clock.c +++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c @@ -362,7 +362,7 @@ static void init_pll(const struct pll_init_data *data) pllctl_reg_write(data->pll, ctl, tmp);
mult = data->pll_freq / fpll; - for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) { + for (mult = max(mult, 1); mult <= MAX_MULT; mult++) { div = (fpll * mult) / data->pll_freq; if (div < 1 || div > MAX_DIV) continue; diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 7b5c1e4..7a9b03a 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -247,47 +247,47 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
switch (ddr3_cfg->mem_speed) { case 800: - txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } break; case 1066: - txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(37500, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } break; case 1333: - txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(45000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } break; case 1600: - txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5000), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5000), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } break; default: @@ -295,18 +295,18 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, hang(); break; } - txpdll = DIV_ROUND_UP(MAX(10 * clkper, 24000), clkper) - 1; - tcksre = DIV_ROUND_UP(MAX(5 * clkper, 10000), clkper); + txpdll = DIV_ROUND_UP(max(10 * clkper, 24000), clkper) - 1; + tcksre = DIV_ROUND_UP(max(5 * clkper, 10000), clkper); taonpd = DIV_ROUND_UP(2000, clkper) - 1; tcksrx = tcksre; taofpd = taonpd; twr = DIV_ROUND_UP(15000, clkper) - 1; - tmrd = DIV_ROUND_UP(MAX(12 * clkper, 15000), clkper) - 1; + tmrd = DIV_ROUND_UP(max(12 * clkper, 15000), clkper) - 1; trc = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1; tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1; tcl = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3; trp = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1; - twtr = ROUND(MAX(4 * clkper, 7500) / clkper, 1) - 1; + twtr = ROUND(max(4 * clkper, 7500) / clkper, 1) - 1; trcd = trp; trtp = twtr; cs0_end = 4 * sysinfo->cs_density - 1; diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c index 59b3fe9..b57b2c3 100644 --- a/arch/x86/lib/physmem.c +++ b/arch/x86/lib/physmem.c @@ -189,7 +189,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size)
/* Handle memory below 4GB. */ if (start <= max_addr) { - phys_size_t low_size = MIN(max_addr + 1 - start, size); + phys_size_t low_size = min(max_addr + 1 - start, size); void *start_ptr = (void *)(uintptr_t)start;
assert(((phys_addr_t)(uintptr_t)start) == start); @@ -208,7 +208,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size) /* Handle the first partial page. */ if (offset) { phys_addr_t end = - MIN(map_addr + LARGE_PAGE_SIZE, start + size); + min(map_addr + LARGE_PAGE_SIZE, start + size); phys_size_t cur_size = end - start; x86_phys_memset_page(map_addr, offset, c, cur_size); size -= cur_size; diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c index 6789efb..e683be3 100644 --- a/board/freescale/common/ics307_clk.c +++ b/board/freescale/common/ics307_clk.c @@ -67,7 +67,7 @@ unsigned long ics307_sysclk_calculator(unsigned long out_freq) continue; /* Calculate the temp out frequency */ tmp_out = input_freq * 2 * vdw / (rdw * od * 1000); - diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out); + diff = max(out_freq, tmp_out) - min(out_freq, tmp_out); /* * calculate the percent, the precision is 1/1000 * If greater than 1/1000, continue diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c index 45e49c7..7ef7f12 100644 --- a/drivers/dma/fsl_dma.c +++ b/drivers/dma/fsl_dma.c @@ -96,7 +96,7 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { uint xfer_size;
while (count) { - xfer_size = MIN(FSL_DMA_MAX_SIZE, count); + xfer_size = min(FSL_DMA_MAX_SIZE, count);
out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF)); out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF)); diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c index fe66ce2..19fbe59 100644 --- a/drivers/i2c/ihs_i2c.c +++ b/drivers/i2c/ihs_i2c.c @@ -84,7 +84,7 @@ static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus) int shift = (alen-1) * 8;
while (alen) { - int transfer = MIN(alen, 2); + int transfer = min(alen, 2); uchar buf[2]; bool is_last = alen <= transfer;
@@ -113,7 +113,7 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr, return 1;
while (len) { - int transfer = MIN(len, 2); + int transfer = min(len, 2);
if (ihs_i2c_transfer(chip, buffer, transfer, read, len <= transfer)) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 97d0389..2640607 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -610,7 +610,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) #endif
cfg->cfg.f_min = 400000; - cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000); + cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000);
cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index b030526..7fb0b92 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -475,7 +475,7 @@ static void __usbtty_puts (const char *str, int len) if (space) { write_buffer (&usbtty_output);
- n = MIN (space, MIN (len, maxlen)); + n = min(space, min(len, maxlen)); buf_push (&usbtty_output, str, n);
str += n; @@ -882,7 +882,7 @@ static int write_buffer (circbuf_t * buf) space_avail = current_urb->buffer_length - current_urb->actual_length; - popnum = MIN (space_avail, buf->size); + popnum = min(space_avail, buf->size); if (popnum == 0) break;
diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c index b7c1038..3559400 100644 --- a/drivers/usb/gadget/designware_udc.c +++ b/drivers/usb/gadget/designware_udc.c @@ -269,7 +269,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d", urb->buffer, urb->buffer_length, urb->actual_length);
- last = MIN(urb->actual_length - endpoint->sent, + last = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
if (last) { @@ -285,7 +285,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance
align = ((ulong)cp % sizeof(int)); if (align) - last = MIN(last, sizeof(int) - align); + last = min(last, sizeof(int) - align);
UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c index b321488..4ba2f3d 100644 --- a/drivers/usb/gadget/ep0.c +++ b/drivers/usb/gadget/ep0.c @@ -315,7 +315,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device, /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */ if (max - urb->actual_length > 0) { int length = - MIN (report_descriptor->wLength, + min(report_descriptor->wLength, max - urb->actual_length); memcpy (urb->buffer + urb->actual_length, &report_descriptor->bData[0], length); diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c index 7f72972..b3e178a 100644 --- a/drivers/usb/gadget/mpc8xx_udc.c +++ b/drivers/usb/gadget/mpc8xx_udc.c @@ -897,7 +897,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) pkt_len = urb->actual_length - epi->sent;
if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) { - pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT); + pkt_len = min(epi->tx_packetSize, EP_MAX_PKT); }
for (x = 0; x < pkt_len; x++) { @@ -942,7 +942,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
/* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */ epi->sent += pkt_len; - epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize); + epi->last = min(urb->actual_length - epi->sent, epi->tx_packetSize); TOGGLE_TX_PID (ep_ref[ep].pid);
if (epi->sent >= epi->tx_urb->actual_length) { diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 733558d..efd5c7f 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -65,7 +65,7 @@ static int udc_write_urb(struct usb_endpoint_instance *endpoint) if (!urb || !urb->actual_length) return -1;
- n = MIN(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); + n = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); if (n <= 0) return -1;
diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c index 099d517..818d3d9 100644 --- a/fs/zfs/zfs.c +++ b/fs/zfs/zfs.c @@ -772,7 +772,7 @@ zap_leaf_array_equal(zap_leaf_phys_t *l, zfs_endian_t endian,
while (bseen < array_len) { struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array; - int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); + int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft)) return 0; @@ -794,7 +794,7 @@ zap_leaf_array_get(zap_leaf_phys_t *l, zfs_endian_t endian, int blksft,
while (bseen < array_len) { struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array; - int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); + int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft)) /* Don't use errno because this error is to be ignored. */ @@ -2118,7 +2118,7 @@ zfs_read(zfs_file_t file, char *buf, uint64_t len) data->file_start = blkid * blksz; data->file_end = data->file_start + blksz;
- movesize = MIN(length, data->file_end - (int) file->offset - red); + movesize = min(length, data->file_end - (int)file->offset - red);
memmove(buf, data->file_buf + file->offset + red - data->file_start, movesize);