Hello Stephen,
Am 16.08.2016 um 00:59 schrieb Stephen Warren:
On 08/15/2016 04:49 PM, Tom Rini wrote:
Hey guys,
Is anyone else running the crc32 tftp tests with test.py? I'm trying to do it locally but even with a 2MiB file it looks like somehow the crc32 is never captured in the output. I've already made sure that the crc32 value is in lowercase to match the U-Boot output and running the test steps in console gives me the expected output. And the rest of the network tests pass, any ideas? Thanks!
I'm not certain that anyone other than myself is running test.py on real HW (vs. sandbox where it's trivial).
I run it on real hw, as I start test.py from tbot on at91, am335x and imx6 based boards ... (Ok, I had to admit that I did not found time since my vacation to look, why my cyclic automated tests with buildbot not work ...) but for an older example: http://xeidos.ddns.net/tests/test_db_auslesen.php#60 (may slow as tbot and this webserver runs on a raspberry pi)
and click on "test py result" to see test.py output ...
But sorry, yes, I did not run the crc32 tftp tests ...
bye, Heiko
If you look at test-log.html it should show what U-Boot outputs on the console, and where any error was detected in the test. Alternativeluy, add "-s" to the invocation and U-Boot output should show up on stdout while the tests are running. What's the error reported there; just a timeout waiting for the CRC? Here's an example of what test_net_tftpboot looks like for me:
Tegra210 (P2371-2180) # tftpboot 80000000 ubtest-readable.bin Using eth_rtl8169 device TFTP from server 10.20.204.51; our IP address is 10.20.204.52 Filename 'ubtest-readable.bin'. Load address: 0x80000000 Loading: *%08################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### 2.9 MiB/s done Bytes transferred = 5058624 (4d3040 hex) Tegra210 (P2371-2180) # crc32 80000000 $filesize crc32 for 80000000 ... 804d303f ==> c2244b26 Tegra210 (P2371-2180) #
In the past, I have seen tests pass when run manually but not under test.py, e.g. due to heap fragmentation, state, or corrupted memory due to earlier tests, which weren't run in the manual case. Might that be the issue? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot