Le 2019-01-15 13:53, Alexandre GRIVEAUX a écrit :
Hello,
I tried to have mainline uboot for Z-turn board (patch sent in December, wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board) Even with the right ps7_init_gpl.c : the board doesn't boot.
I tried to correct zynq-zturn.dts [0] because I don't find MYIR references in drivers from this line: compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; And the HEADER is not the same as the other boards: same result.
Picking a board (microzed) with zturn DTS above and using microzed_defconfig provide some good result to me (except for ethernet)
According to the build messages between zturn and microzed, the make command doesn't create this SPL files:
spl/board/xilinx/zynq/.built-in.o.cmd spl/board/xilinx/zynq/built-in.o spl/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.o spl/board/xilinx/zynq/zynq-microzed/.ps7_init_gpl.o.cmd spl/u-boot-spl
I don’t have a clue how to resolv that. Do you have any idea ?
Thanks
[0] Exemple taken from https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Hello,
Nobody to help me ?
Thanks.