Zed is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC.
APSOC: - XC7Z020-CLG484-1 Memory: - 512 MB DDR3 - 256 Mb Quad-SPI Flash( - Full size SD/MMC card cage Connectivity: - 10/100/1000 Ethernet - USB OTG (Device/Host/OTG) - USB-UART Expansion: - FMC (Low Pin Count) - Pmod. headers (2x6) Video/Display: - HDMI output (1080p60 + audio) - VGA connector - 128 x 32 OLED - User LEDs (9) User inputs: - Slide switches (8) - Push button switches (7) Audio: - 24-bit stereo audio CODEC - Stereo line in/out - Headphone - Microphone input Analog: - Xilinx XADC header - Supports 4 analog inputs - 2 Differential / 4 Single-ended Debug: - On-board USB JTAG programming port - ARM Debug Access Port (DAP)
For more info - http://zedboard.org/product/zedboard
Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- V2: Updated domain name in mail ids'
boards.cfg | 1 + include/configs/zynq_zed.h | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 include/configs/zynq_zed.h
diff --git a/boards.cfg b/boards.cfg index 9f0374f..b24a245 100644 --- a/boards.cfg +++ b/boards.cfg @@ -355,6 +355,7 @@ Active arm armv7 u8500 st-ericsson snowball Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang b18965@freescale.com Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek monstr@monstr.eu:Jagannadha Sutradharudu Teki jaganna@xilinx.com +Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek monstr@monstr.eu:Jagannadha Sutradharudu Teki jaganna@xilinx.com Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren twarren@nvidia.com Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding thierry.reding@avionic-design.de Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding thierry.reding@avionic-design.de diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h new file mode 100644 index 0000000..1d3dcf7 --- /dev/null +++ b/include/configs/zynq_zed.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration for Zynq Evaluation and Development Board - ZedBoard + * See zynq_common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_ZED_H +#define __CONFIG_ZYNQ_ZED_H + +#define CONFIG_ZYNQ_SERIAL_UART1 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_QSPI +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_BOOT_FREEBSD + +#include <configs/zynq-common.h> + +#endif /* __CONFIG_ZYNQ_ZED_H */