Hi Giulio,
On Mon, Apr 27, 2020 at 12:11 PM Giulio Benetti giulio.benetti@benettiengineering.com wrote:
Make "of=" the same for the 2 commands since we're writing to the same sd-card.
Signed-off-by: Giulio Benetti giulio.benetti@benettiengineering.com
board/freescale/imxrt1050-evk/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README index f7e2894025..55b6a0877a 100644 --- a/board/freescale/imxrt1050-evk/README +++ b/board/freescale/imxrt1050-evk/README @@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the u-boot.img.
- Flash the SPL image into the micro SD card:
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync
I usually prefer to write /dev/sdX instead because someone may follow the instructions as is and inadvertently kill their hard disk or another device that may appear at /dev/sdb.