On the miami board, ethernet is accessed via logic. To use it, one would have to program logic first and then set up the rgmii conversion block as well. Not likely to ever be used, so disable network support by default to save some space. --- configs/topic_miami_defconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index 086c147..261a530 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -5,6 +5,7 @@ CONFIG_ARCH_ZYNQ=y CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt" CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miami" +CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=0 CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_CPUINFO is not set @@ -20,12 +21,13 @@ CONFIG_CMD_USB=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y -CONFIG_OF_BOARD_SETUP=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_ZYNQ_SDHCI=y CONFIG_MMC_SDHCI=y @@ -33,7 +35,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -# CONFIG_NETDEVICES is not set CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_BASE=0xe0000000