Unlike other Allwinner SOC's H3/H5/V3s OTG support 4 endpoints with relevant fifo configs, rest all have 5 endpoints. So add the fifo configs and defer them based on udevice_id compatible.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- drivers/usb/musb-new/sunxi.c | 44 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 0b7ff9f..562d311 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -301,13 +301,52 @@ static const struct musb_platform_ops sunxi_musb_ops = { #define SUNXI_MUSB_MAX_EP_NUM 6 #define SUNXI_MUSB_RAM_BITS 11
+static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = { + MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), +}; + +/* H3/V3s OTG supports only 4 endpoints */ +#define SUNXI_MUSB_MAX_EP_NUM_H3 5 + +static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = { + MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), +}; + static struct musb_hdrc_config musb_config = { + .fifo_cfg = sunxi_musb_mode_cfg, + .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), .multipoint = true, .dyn_fifo = true, .num_eps = SUNXI_MUSB_MAX_EP_NUM, .ram_bits = SUNXI_MUSB_RAM_BITS, };
+static struct musb_hdrc_config musb_config_h3 = { + .fifo_cfg = sunxi_musb_mode_cfg_h3, + .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3), + .multipoint = true, + .dyn_fifo = true, + .soft_con = true, + .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3, + .ram_bits = SUNXI_MUSB_RAM_BITS, +}; + static int musb_usb_probe(struct udevice *dev) { struct sunxi_glue *glue = dev_get_priv(dev); @@ -328,7 +367,10 @@ static int musb_usb_probe(struct udevice *dev)
pdata.power = 250; pdata.platform_ops = &sunxi_musb_ops; - pdata.config = &musb_config; + if (!device_is_compatible(dev, "allwinner,sun8i-h3-musb")) + pdata.config = &musb_config; + else + pdata.config = &musb_config_h3;
#ifdef CONFIG_USB_MUSB_HOST pdata.mode = MUSB_HOST;