Filling musb_hdrc pdata using structure will unnecessary add extra ifdefs, so fill them inside probe call for better code understanding and get rid ifdefs using devicetree compatible.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- drivers/usb/musb-new/sunxi.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 3f3b898..0b7ff9f 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -308,22 +308,12 @@ static struct musb_hdrc_config musb_config = { .ram_bits = SUNXI_MUSB_RAM_BITS, };
-static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_USB_MUSB_HOST) - .mode = MUSB_HOST, -#else - .mode = MUSB_PERIPHERAL, -#endif - .config = &musb_config, - .power = 250, - .platform_ops = &sunxi_musb_ops, -}; - static int musb_usb_probe(struct udevice *dev) { struct sunxi_glue *glue = dev_get_priv(dev); struct musb_host_data *host = &glue->mdata; struct usb_bus_priv *priv = dev_get_uclass_priv(dev); + struct musb_hdrc_platform_data pdata; void *base = dev_read_addr_ptr(dev); int ret;
@@ -336,8 +326,13 @@ static int musb_usb_probe(struct udevice *dev)
priv->desc_before_addr = true;
+ pdata.power = 250; + pdata.platform_ops = &sunxi_musb_ops; + pdata.config = &musb_config; + #ifdef CONFIG_USB_MUSB_HOST - host->host = musb_init_controller(&musb_plat, &glue->dev, base); + pdata.mode = MUSB_HOST; + host->host = musb_init_controller(&pdata, &glue->dev, base); if (!host->host) return -EIO;
@@ -345,7 +340,8 @@ static int musb_usb_probe(struct udevice *dev) if (!ret) printf("Allwinner mUSB OTG (Host)\n"); #else - ret = musb_register(&musb_plat, &glue->dev, base); + pdata.mode = MUSB_PERIPHERAL; + ret = musb_register(&pdata, &glue->dev, base); if (!ret) printf("Allwinner mUSB OTG (Peripheral)\n"); #endif