Thanks. That's what I suspected.
My webmail sends HTML messages by default, and I keep forgetting to set up "plain text". Sorry about that.
Regards,
Helio Fujimoto.
===================== Helio Fujimoto wrote:
it is attached directly to the bus. There is an FPGA which is controls
the
IDE interface. The IDE data bus [0-15] is connected to the MPC855T
data bus [15-0].
Ah. We also have CF direct to local bus.... Here's how we connected it so as to keep common code common:
PER_DATA8 <-> CF_DATA15 PER_DATA9 <-> CF_DATA14 PER_DATA10 <-> CF_DATA13 PER_DATA11 <-> CF_DATA12 PER_DATA12 <-> CF_DATA11 PER_DATA13 <-> CF_DATA10 PER_DATA14 <-> CF_DATA9 PER_DATA15 <-> CF_DATA8 PER_DATA0 <-> CF_DATA7 PER_DATA1 <-> CF_DATA6 PER_DATA2 <-> CF_DATA5 PER_DATA3 <-> CF_DATA4 PER_DATA4 <-> CF_DATA3 PER_DATA5 <-> CF_DATA2 PER_DATA6 <-> CF_DATA1 PER_DATA7 <-> CF_DATA0
Since you're running directly from 855T local bus and not from your fpga, you're in for some rewiring. If, however, your data lines run through your fpga, you can simply reprogram the pins.
Good luck,
Travis ps: I just switched from Evolution to Thunderbird, I hope this is plain text only!