Hi Hugh,
After this patch set, only one board is still using the "spi0 = &spi1" alias, could you correct it at the same time?
rk3399-puma-haikou-u-boot.dtsi
Thanks,
- Kever
On 2020/11/15 上午2:06, Hugh Cole-Baker wrote:
Commit c4cea2bbf995 ("rockchip: Enable building a SPI ROM image on bob") added an alias spi1 referring to spi@ff1d0000, however in several boards there was already an alias spi0 referring to the same node, and having both aliases present broke booting U-Boot from SPI flash.
This series removes the spi0 alias from the Pinebook Pro and RK3399-ROC-PC and sets the default bus for SPI flash to 1, so that the correct device is used. The Rockpro64 board, which was also affected, has already had the same type of fix applied.
The rk3399 Puma board also has an alias spi0 = &spi1 in its dts, but I haven't touched its configuration as it seems to have a more complex setup where spi1 is already an alias that points to &spi5. I don't have one of these boards to test with, but I suspect it wasn't affected by the addition of the spi1 alias in rk3399-u-boot.dtsi.
Hugh Cole-Baker (2): rockchip: pinebook-pro: default to SPI bus 1 for SPI-flash rockchip: rk3399-roc-pc: default to SPI bus 1 for SPI-flash
arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 4 ---- arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 4 ---- configs/pinebook-pro-rk3399_defconfig | 2 ++ configs/roc-pc-mezzanine-rk3399_defconfig | 1 + configs/roc-pc-rk3399_defconfig | 1 + 5 files changed, 4 insertions(+), 8 deletions(-)