Re: [PATCH 08/16] arm: stm32mp: add support of STM32MP13x

Hi Patrick

2 minor typo below

Thanks Patrice

On 5/6/22 16:06, Patrick Delaunay wrote:

Introduce the code in mach-stm32mp and the configuration file stm32mp13_defconfig for the new STM32MP family.

Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com

arch/arm/mach-stm32mp/Kconfig | 21 +++- arch/arm/mach-stm32mp/Kconfig.13x | 57 +++++++++ arch/arm/mach-stm32mp/Makefile | 1 + arch/arm/mach-stm32mp/cpu.c | 3 + arch/arm/mach-stm32mp/fdt.c | 3 + arch/arm/mach-stm32mp/include/mach/stm32.h | 26 ++++ .../arm/mach-stm32mp/include/mach/sys_proto.h | 16 ++- arch/arm/mach-stm32mp/stm32mp13x.c | 115 ++++++++++++++++++ board/st/stm32mp1/Kconfig | 15 +++ board/st/stm32mp1/MAINTAINERS | 2 + configs/stm32mp15_basic_defconfig | 2 +- configs/stm32mp15_defconfig | 2 +- configs/stm32mp15_trusted_defconfig | 2 +- include/configs/stm32mp13_common.h | 106 ++++++++++++++++ include/configs/stm32mp13_st_common.h | 17 +++ include/configs/stm32mp15_common.h | 4 +- 16 files changed, 385 insertions(+), 7 deletions(-) create mode 100644 arch/arm/mach-stm32mp/Kconfig.13x create mode 100644 arch/arm/mach-stm32mp/stm32mp13x.c create mode 100644 include/configs/stm32mp13_common.h create mode 100644 include/configs/stm32mp13_st_common.h

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index 3b4936c326..db47baba6d 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -37,6 +37,24 @@ choice prompt "Select STMicroelectronics STM32MPxxx Soc" default STM32MP15x

+config STM32MP13x

• bool "Support STMicroelectronics STM32MP13x Soc"
• select ARM_SMCCC
• select CPU_V7A
• select CPU_V7_HAS_NONSEC
• select CPU_V7_HAS_VIRT
• select OF_BOARD
• select OF_BOARD_SETUP
• select PINCTRL_STM32
• select STM32_RCC
• select STM32_RESET
• select STM32_SERIAL
• select SYS_ARCH_TIMER
• imply CMD_NVEDIT_INFO
• help

• support of STMicroelectronics SOC STM32MP13x family
  

• STMicroelectronics MPU with core ARMv7
  

config STM32MP15x bool "Support STMicroelectronics STM32MP15x Soc" select ARCH_SUPPORT_PSCI @@ -85,7 +103,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2

config STM32_ETZPC bool "STM32 Extended TrustZone Protection"

• depends on STM32MP15x

• depends on STM32MP15x || STM32MP13x default y imply BOOTP_SERVERIP help

@@ -108,6 +126,7 @@ config CMD_STM32KEY This command is used to evaluate the secure boot on stm32mp SOC, it is deactivated by default in real products.

+source "arch/arm/mach-stm32mp/Kconfig.13x" source "arch/arm/mach-stm32mp/Kconfig.15x"

source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig" diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x new file mode 100644 index 0000000000..5fc000986e --- /dev/null +++ b/arch/arm/mach-stm32mp/Kconfig.13x @@ -0,0 +1,57 @@ +if STM32MP13x

+choice

• prompt "STM32MP13x board select"
• optional

+config TARGET_ST_STM32MP13x

• bool "STMicroelectronics STM32MP13x boards"
• imply BOOTSTAGE
• imply CMD_BOOTSTAGE
• imply CMD_CLS if CMD_BMP
• imply DISABLE_CONSOLE
• imply PRE_CONSOLE_BUFFER
• imply SILENT_CONSOLE
• help

• target the STMicroelectronics board with SOC STM32MP13x
  

• managed by board/st/stm32mp1.
  

• The difference between board are managed with devicetree
  

+endchoice

+config SYS_TEXT_BASE

• default 0xC0000000

+config PRE_CON_BUF_ADDR

• default 0xC0800000

+config PRE_CON_BUF_SZ

• default 4096

+config BOOTSTAGE_STASH_ADDR

• default 0xC3000000

+if BOOTCOUNT_GENERIC +config SYS_BOOTCOUNT_SINGLEWORD

• default y

+# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(31) +config SYS_BOOTCOUNT_ADDR

• default 0x5C00A17C

+endif

+if DEBUG_UART

+# debug on UART4 by default +config DEBUG_UART_BASE

• default 0x40010000

+# clock source is HSI on reset +config DEBUG_UART_CLOCK

• default 48000000 if STM32_FPGA
• default 64000000

+endif

+source "board/st/stm32mp1/Kconfig"

+endif diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index 0ffec6e02f..1db9057e04 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -8,6 +8,7 @@ obj-y += dram_init.o obj-y += syscon.o obj-y += bsec.o

+obj-$(CONFIG_STM32MP13x) += stm32mp13x.o obj-$(CONFIG_STM32MP15x) += stm32mp15x.o

ifdef CONFIG_SPL_BUILD diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index b808964d3e..240960ada4 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -52,8 +52,11 @@ void dram_bank_mmu_setup(int bank) enum dcache_option option;

if (IS_ENABLED(CONFIG_SPL_BUILD)) { +/* STM32_SYSRAM_BASE exist only when SPL is supported */ +#ifdef CONFIG_SPL start = ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE); size = ALIGN(STM32_SYSRAM_SIZE, MMU_SECTION_SIZE); +#endif } else if (gd->flags & GD_FLG_RELOC) { /* bd->bi_dram is available only after relocation */ start = bd->bi_dram[bank].start; diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c index 969e7d94e9..ad45728949 100644 --- a/arch/arm/mach-stm32mp/fdt.c +++ b/arch/arm/mach-stm32mp/fdt.c @@ -259,6 +259,9 @@ int ft_system_setup(void *blob, struct bd_info *bd) u32 pkg, cpu; char name[SOC_NAME_SIZE];

• if (IS_ENABLED(CONFIG_STM32MP13x))

• return 0;
  

• soc = fdt_path_offset(blob, "/soc"); if (soc < 0) return soc;

diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index 47e88fc3dc..cdb58fd40e 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -17,7 +17,9 @@ #define STM32_RCC_BASE 0x50000000 #define STM32_PWR_BASE 0x50001000 #define STM32_SYSCFG_BASE 0x50020000 +#ifdef CONFIG_STM32MP15x #define STM32_DBGMCU_BASE 0x50081000 +#endif #define STM32_FMC2_BASE 0x58002000 #define STM32_DDRCTRL_BASE 0x5A003000 #define STM32_DDRPHYC_BASE 0x5A004000 @@ -26,8 +28,14 @@ #define STM32_STGEN_BASE 0x5C008000 #define STM32_TAMP_BASE 0x5C00A000

+#ifdef CONFIG_STM32MP15x #define STM32_USART1_BASE 0x5C000000 #define STM32_USART2_BASE 0x4000E000 +#endif +#ifdef CONFIG_STM32MP13x +#define STM32_USART1_BASE 0x4c000000 +#define STM32_USART2_BASE 0x4c001000 +#endif #define STM32_USART3_BASE 0x4000F000 #define STM32_UART4_BASE 0x40010000 #define STM32_UART5_BASE 0x40011000 @@ -39,8 +47,10 @@ #define STM32_SDMMC2_BASE 0x58007000 #define STM32_SDMMC3_BASE 0x48004000

+#ifdef CONFIG_STM32MP15x #define STM32_SYSRAM_BASE 0x2FFC0000 #define STM32_SYSRAM_SIZE SZ_256K +#endif

#define STM32_DDR_BASE 0xC0000000 #define STM32_DDR_SIZE SZ_1G @@ -98,6 +108,8 @@ enum boot_device {

/* TAMP registers */ #define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x)

+#ifdef CONFIG_STM32MP15x #define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4) #define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5) #define TAMP_COPRO_RSC_TBL_ADDRESS TAMP_BACKUP_REGISTER(17) @@ -111,6 +123,12 @@ enum boot_device { #define TAMP_COPRO_STATE_CSTOP 3 #define TAMP_COPRO_STATE_STANDBY 4 #define TAMP_COPRO_STATE_CRASH 5 +#endif

+#ifdef CONFIG_STM32MP13x +#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(31) +#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30) +#endif

#define TAMP_BOOT_MODE_MASK GENMASK(15, 8) #define TAMP_BOOT_MODE_SHIFT 8 @@ -138,11 +156,19 @@ enum forced_boot_mode { #define STM32_BSEC_LOCK(id) (STM32_BSEC_LOCK_OFFSET + (id) * 4)

/* BSEC OTP index */ +#ifdef CONFIG_STM32MP15x #define BSEC_OTP_RPN 1 #define BSEC_OTP_SERIAL 13 #define BSEC_OTP_PKG 16 #define BSEC_OTP_MAC 57 #define BSEC_OTP_BOARD 59 +#endif +#ifdef CONFIG_STM32MP13x +#define BSEC_OTP_RPN 1 +#define BSEC_OTP_SERIAL 13 +#define BSEC_OTP_MAC 57 +#define BSEC_OTP_BOARD 60 +#endif

#endif /* __ASSEMBLY__ */ #endif /* _MACH_STM32_H_ */ diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h index 8b61135aeb..829b3feebf 100644 --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h @@ -3,7 +3,7 @@

• Copyright (C) 2015-2017, STMicroelectronics - All Rights Reserved

*/

-/* ID = Device Version (bit31:16) + Device Part Number (RPN) (bit7:0) */ +/* ID = Device Version (bit31:16) + Device Part Number (RPN) (bit15:0) */ #define CPU_STM32MP157Cxx 0x05000000 #define CPU_STM32MP157Axx 0x05000001 #define CPU_STM32MP153Cxx 0x05000024 @@ -17,10 +17,24 @@ #define CPU_STM32MP151Fxx 0x050000AE #define CPU_STM32MP151Dxx 0x050000AF

+#define CPU_STM32MP135Cxx 0x05010000 +#define CPU_STM32MP135Axx 0x05010001 +#define CPU_STM32MP133Cxx 0x050100C0 +#define CPU_STM32MP133Axx 0x050100C1 +#define CPU_STM32MP131Cxx 0x050106C8 +#define CPU_STM32MP131Axx 0x050106C9 +#define CPU_STM32MP135Fxx 0x05010800 +#define CPU_STM32MP135Dxx 0x05010801 +#define CPU_STM32MP133Fxx 0x050108C0 +#define CPU_STM32MP133Dxx 0x050108C1 +#define CPU_STM32MP131Fxx 0x05010EC8 +#define CPU_STM32MP131Dxx 0x05010EC9

/* return CPU_STMP32MP...Xxx constants */ u32 get_cpu_type(void);

#define CPU_DEV_STM32MP15 0x500 +#define CPU_DEV_STM32MP13 0x501

/* return CPU_DEV constants */ u32 get_cpu_dev(void); diff --git a/arch/arm/mach-stm32mp/stm32mp13x.c b/arch/arm/mach-stm32mp/stm32mp13x.c new file mode 100644 index 0000000000..38961310dc --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp13x.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/*

• • Copyright (C) 2020, STMicroelectronics - All Rights Reserved

s/2020/2022

• */

+#define LOG_CATEGORY LOGC_ARCH

+#include <common.h> +#include <log.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch/stm32.h> +#include <asm/arch/sys_proto.h>

+/* SYSCFG register */ +#define SYSCFG_IDC_OFFSET 0x380 +#define SYSCFG_IDC_DEV_ID_MASK GENMASK(11, 0) +#define SYSCFG_IDC_DEV_ID_SHIFT 0 +#define SYSCFG_IDC_REV_ID_MASK GENMASK(31, 16) +#define SYSCFG_IDC_REV_ID_SHIFT 16

+/* Device Part Number (RPN) = OTP_DATA1 lower 11 bits */ +#define RPN_SHIFT 0 +#define RPN_MASK GENMASK(11, 0)

+static u32 read_idc(void) +{

• void *syscfg = syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
• return readl(syscfg + SYSCFG_IDC_OFFSET);

+}

+u32 get_cpu_dev(void) +{

• return (read_idc() & SYSCFG_IDC_DEV_ID_MASK) >> SYSCFG_IDC_DEV_ID_SHIFT;

+}

+u32 get_cpu_rev(void) +{

• return (read_idc() & SYSCFG_IDC_REV_ID_MASK) >> SYSCFG_IDC_REV_ID_SHIFT;

+}

+/* Get Device Part Number (RPN) from OTP */ +static u32 get_cpu_rpn(void) +{

• return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);

+}

+u32 get_cpu_type(void) +{

• return (get_cpu_dev() << 16) | get_cpu_rpn();

+}

+void get_soc_name(char name[SOC_NAME_SIZE]) +{

• char *cpu_s, *cpu_r;
• /* MPUs Part Numbers */
• switch (get_cpu_type()) {
• case CPU_STM32MP135Fxx:

• cpu_s = "135F";
  

• break;
  

• case CPU_STM32MP135Dxx:

• cpu_s = "135D";
  

• break;
  

• case CPU_STM32MP135Cxx:

• cpu_s = "135C";
  

• break;
  

• case CPU_STM32MP135Axx:

• cpu_s = "135A";
  

• break;
  

• case CPU_STM32MP133Fxx:

• cpu_s = "133F";
  

• break;
  

• case CPU_STM32MP133Dxx:

• cpu_s = "133D";
  

• break;
  

• case CPU_STM32MP133Cxx:

• cpu_s = "133C";
  

• break;
  

• case CPU_STM32MP133Axx:

• cpu_s = "133A";
  

• break;
  

• case CPU_STM32MP131Fxx:

• cpu_s = "131F";
  

• break;
  

• case CPU_STM32MP131Dxx:

• cpu_s = "131D";
  

• break;
  

• case CPU_STM32MP131Cxx:

• cpu_s = "131C";
  

• break;
  

• case CPU_STM32MP131Axx:

• cpu_s = "131A";
  

• break;
  

• default:

• cpu_s = "????";
  

• break;
  

• }
• /* REVISION */
• switch (get_cpu_rev()) {
• case CPU_REV1:

• cpu_r = "A";
  

• break;
  

• case CPU_REV1_1:

• cpu_r = "Z";
  

• break;
  

• default:

• cpu_r = "?";
  

• break;
  

• }
• snprintf(name, SOC_NAME_SIZE, "STM32MP%s Rev.%s", cpu_s, cpu_r);

+} diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig index 89e97aec2b..6ab8f80fa4 100644 --- a/board/st/stm32mp1/Kconfig +++ b/board/st/stm32mp1/Kconfig @@ -11,3 +11,18 @@ config SYS_CONFIG_NAME

source "board/st/common/Kconfig" endif

+if TARGET_ST_STM32MP13x

+config SYS_BOARD

• default "stm32mp1"

+config SYS_VENDOR

• default "st"

+config SYS_CONFIG_NAME

• default "stm32mp13_st_common"

+source "board/st/common/Kconfig"

+endif diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS index d57a49820e..c9252e90f4 100644 --- a/board/st/stm32mp1/MAINTAINERS +++ b/board/st/stm32mp1/MAINTAINERS @@ -9,5 +9,7 @@ F: board/st/stm32mp1/ F: configs/stm32mp15_defconfig F: configs/stm32mp15_basic_defconfig F: configs/stm32mp15_trusted_defconfig +F: include/configs/stm32mp13_common.h +F: include/configs/stm32mp13_st_common.h F: include/configs/stm32mp15_common.h F: include/configs/stm32mp15_st_common.h diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 998947fe3d..587b087b99 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -9,8 +9,8 @@ CONFIG_SPL_TEXT_BASE=0x2FFC2500 CONFIG_SPL_MMC=y CONFIG_SPL=y CONFIG_CMD_STM32KEY=y -CONFIG_TARGET_ST_STM32MP15x=y CONFIG_TYPEC_STUSB160X=y +CONFIG_TARGET_ST_STM32MP15x=y CONFIG_ENV_OFFSET_REDUND=0x2C0000 CONFIG_CMD_STM32PROG=y CONFIG_SPL_SPI_FLASH_SUPPORT=y diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig index c4f06af732..da4013f1c9 100644 --- a/configs/stm32mp15_defconfig +++ b/configs/stm32mp15_defconfig @@ -7,8 +7,8 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" CONFIG_DDR_CACHEABLE_SIZE=0x10000000 CONFIG_CMD_STM32KEY=y -CONFIG_TARGET_ST_STM32MP15x=y CONFIG_TYPEC_STUSB160X=y +CONFIG_TARGET_ST_STM32MP15x=y CONFIG_ENV_OFFSET_REDUND=0x4C0000 CONFIG_CMD_STM32PROG=y # CONFIG_ARMV7_NONSEC is not set diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index 7c2adb3eb0..73279a4cf6 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -7,9 +7,9 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" CONFIG_DDR_CACHEABLE_SIZE=0x10000000 CONFIG_CMD_STM32KEY=y +CONFIG_TYPEC_STUSB160X=y CONFIG_STM32MP15x_STM32IMAGE=y CONFIG_TARGET_ST_STM32MP15x=y -CONFIG_TYPEC_STUSB160X=y CONFIG_ENV_OFFSET_REDUND=0x2C0000 CONFIG_CMD_STM32PROG=y # CONFIG_ARMV7_NONSEC is not set diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h new file mode 100644 index 0000000000..799e3f053b --- /dev/null +++ b/include/configs/stm32mp13_common.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/*

• • Copyright (C) 2021, STMicroelectronics - All Rights Reserved

s/2021/2022

• • Configuration settings for the STM32MP15x CPU
• */

+#ifndef __CONFIG_STM32MP13_COMMMON_H +#define __CONFIG_STM32MP13_COMMMON_H +#include <linux/sizes.h> +#include <asm/arch/stm32.h>

+/*

• • Configuration of the external SRAM memory used by U-Boot
• */

+#define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_4M)

+/*

• • Console I/O buffer size
• */

+#define CONFIG_SYS_CBSIZE SZ_1K

+/*

• • For booting Linux, use the first 256 MB of memory, since this is
• • the maximum mapped by the Linux kernel during initialization.
• */

+#define CONFIG_SYS_BOOTMAPSZ SZ_256M

+/* Extend size of kernel image for uncompression */ +#define CONFIG_SYS_BOOTM_LEN SZ_32M

+/*MMC SD*/ +#define CONFIG_SYS_MMC_MAX_DEVICE 2

+/* NAND support */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1

+/*****************************************************************************/ +#ifdef CONFIG_DISTRO_DEFAULTS +/*****************************************************************************/

+#ifdef CONFIG_CMD_MMC +#define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0) +#define BOOT_TARGET_MMC1(func) func(MMC, mmc, 1) +#else +#define BOOT_TARGET_MMC0(func) +#define BOOT_TARGET_MMC1(func) +#endif

+#define BOOT_TARGET_DEVICES(func) \

• BOOT_TARGET_MMC1(func) \
• BOOT_TARGET_MMC0(func)

+/*

• • default bootcmd for stm32mp13:
• • for mmc boot (eMMC, SD card), distro boot on the same mmc device
• */

+#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \

• "echo "Boot over ${boot_device}${boot_instance}!";" \

• "run env_check;" \
  

• "if test ${boot_device} = mmc;" \
  

• "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
  

• "run distro_bootcmd;" \
  

• "fi;\0"

+#define STM32MP_EXTRA \

• "env_check=if env info -p -d -q; then env save; fi\0" \
• "boot_net_usb_start=true\0"

+#ifndef STM32MP_BOARD_EXTRA_ENV +#define STM32MP_BOARD_EXTRA_ENV +#endif

+#include <config_distro_bootcmd.h>

+/*

• • memory layout for 32M uncompressed/compressed kernel,
• • 1M fdt, 1M script, 1M pxe and 1M for overlay
• • and the ramdisk at the end.
• */

+#define __KERNEL_ADDR_R __stringify(0xc2000000) +#define __FDT_ADDR_R __stringify(0xc4000000) +#define __SCRIPT_ADDR_R __stringify(0xc4100000) +#define __PXEFILE_ADDR_R __stringify(0xc4200000) +#define __FDTOVERLAY_ADDR_R __stringify(0xc4300000) +#define __RAMDISK_ADDR_R __stringify(0xc4400000)

+#define STM32MP_MEM_LAYOUT \

• "kernel_addr_r=" __KERNEL_ADDR_R "\0" \
• "fdt_addr_r=" __FDT_ADDR_R "\0" \
• "scriptaddr=" __SCRIPT_ADDR_R "\0" \
• "pxefile_addr_r=" __PXEFILE_ADDR_R "\0" \
• "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \
• "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0"

+#define CONFIG_EXTRA_ENV_SETTINGS \

• STM32MP_MEM_LAYOUT \
• STM32MP_BOOTCMD \
• BOOTENV \
• STM32MP_EXTRA \
• STM32MP_BOARD_EXTRA_ENV

+#endif /* ifdef CONFIG_DISTRO_DEFAULTS*/

+#endif /* __CONFIG_STM32MP13_COMMMON_H */ diff --git a/include/configs/stm32mp13_st_common.h b/include/configs/stm32mp13_st_common.h new file mode 100644 index 0000000000..d73526f14e --- /dev/null +++ b/include/configs/stm32mp13_st_common.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/*

• • Copyright (C) 2022, STMicroelectronics - All Rights Reserved
• • Configuration settings for the STMicroelectonics STM32MP15x boards
• */

+#ifndef __CONFIG_STM32MP13_ST_COMMON_H__ +#define __CONFIG_STM32MP13_ST_COMMON_H__

+#define STM32MP_BOARD_EXTRA_ENV \

• "usb_pgood_delay=1000\0" \
• "console=ttySTM0\0"

+#include <configs/stm32mp13_common.h>

+#endif diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index 6b40cdb017..adfb2898b0 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -14,7 +14,7 @@

• Configuration of the external SRAM memory used by U-Boot

*/ #define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE

/*

• Console I/O buffer size

@@ -97,7 +97,7 @@ BOOT_TARGET_PXE(func)

/*

• • default bootcmd for stm32mp1:

• • default bootcmd for stm32mp15:
  • for serial/usb: execute the stm32prog command
  • for mmc boot (eMMC, SD card), distro boot on the same mmc device
  • for nand or spi-nand boot, distro boot with ubifs on UBI partition