Hi Jonas,
On 2024/2/5 01:30, Jonas Karlman wrote:
The Pine64 PineTab2 is a tablet computer based on the Rockchip RK3566 SoC. The table features 4/8 GB LPDDR4 RAM and 64/128 GB eMMC storage.
Features tested on a Pine64 PineTab2 8GB v2.0:
- SD-card boot
- eMMC boot
- SPI Flash boot
- USB host
Device tree is imported from linux maintainer branch v6.9-armsoc/dts64, commit 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64 PineTab2").
Signed-off-by: Jonas Karlman jonas@kwiboo.se
This patch depend on the series "rockchip: rk35xx: Sync device tree with linux v6.8-rc1" [1].
[1] https://patchwork.ozlabs.org/cover/1891669/
arch/arm/dts/Makefile | 2 + arch/arm/dts/rk3566-pinetab2-u-boot.dtsi | 44 + arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi | 3 + arch/arm/dts/rk3566-pinetab2-v0.1.dts | 28 +
Does this v0.1 version dts really needed? This seems like a test version instead of release version hardware?
Thanks,
- Kever
arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi | 3 + arch/arm/dts/rk3566-pinetab2-v2.0.dts | 48 + arch/arm/dts/rk3566-pinetab2.dtsi | 943 ++++++++++++++++++ board/pine64/quartz64_rk3566/MAINTAINERS | 11 + configs/pinetab2-rk3566_defconfig | 119 +++ doc/board/rockchip/rockchip.rst | 1 + 10 files changed, 1202 insertions(+) create mode 100644 arch/arm/dts/rk3566-pinetab2-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-pinetab2-v0.1.dts create mode 100644 arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi create mode 100644 arch/arm/dts/rk3566-pinetab2-v2.0.dts create mode 100644 arch/arm/dts/rk3566-pinetab2.dtsi create mode 100644 configs/pinetab2-rk3566_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 50f35e3db3f0..825fa1cd368a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -173,6 +173,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
dtb-$(CONFIG_ROCKCHIP_RK3568) += \ rk3566-anbernic-rgxx3.dtb \
- rk3566-pinetab2-v0.1.dtb \
- rk3566-pinetab2-v2.0.dtb \ rk3566-quartz64-a.dtb \ rk3566-quartz64-b.dtb \ rk3566-radxa-cm3-io.dtb \
diff --git a/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi new file mode 100644 index 000000000000..4aa6ab1c848c --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-u-boot.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+
+#include "rk356x-u-boot.dtsi"
+&fspi_dual_io_pins {
- bootph-all;
+};
+&gpio0 {
- bootph-all;
+};
+&i2c0 {
- bootph-pre-ram;
+};
+&rk817 {
- bootph-pre-ram;
- regulators {
bootph-pre-ram;- };
+};
+&sdhci {
- cap-mmc-highspeed;
+};
+&sdmmc_pwren_l {
- bootph-all;
+};
+&sfc {
- bootph-pre-ram;
- u-boot,spl-sfc-no-dma;
- flash@0 {
bootph-pre-ram;- };
+};
+&vcc3v3_sd {
- bootph-pre-ram;
+}; diff --git a/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi new file mode 100644 index 000000000000..061dc3c2c375 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0+
+#include "rk3566-pinetab2-u-boot.dtsi" diff --git a/arch/arm/dts/rk3566-pinetab2-v0.1.dts b/arch/arm/dts/rk3566-pinetab2-v0.1.dts new file mode 100644 index 000000000000..5fe6ca5da9d3 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v0.1.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/;
+#include "rk3566-pinetab2.dtsi"
+/ {
- model = "Pine64 PineTab2 v0.1";
- compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566";
+};
+&lcd {
- reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+&pinctrl {
- lcd0 {
lcd0_rst_l: lcd0-rst-l {rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;};- };
+};
+&sdmmc1 {
- vmmc-supply = <&vcc3v3_sys>;
+}; diff --git a/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi b/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi new file mode 100644 index 000000000000..061dc3c2c375 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0+
+#include "rk3566-pinetab2-u-boot.dtsi" diff --git a/arch/arm/dts/rk3566-pinetab2-v2.0.dts b/arch/arm/dts/rk3566-pinetab2-v2.0.dts new file mode 100644 index 000000000000..9349541cbbd0 --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2-v2.0.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/;
+#include "rk3566-pinetab2.dtsi"
+/ {
- model = "Pine64 PineTab2 v2.0";
- compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566";
+};
+&gpio_keys {
- pinctrl-0 = <&kb_id_det>, <&hall_int_l>;
- event-hall-sensor {
debounce-interval = <20>;gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;label = "Hall Sensor";linux,code = <SW_LID>;linux,input-type = <EV_SW>;wakeup-event-action = <EV_ACT_DEASSERTED>;wakeup-source;- };
+};
+&lcd {
- reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+&pinctrl {
- lcd0 {
lcd0_rst_l: lcd0-rst-l {rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- hall {
hall_int_l: hall-int-l {rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;};- };
+};
+&sdmmc1 {
- vmmc-supply = <&vcc_sys>;
+}; diff --git a/arch/arm/dts/rk3566-pinetab2.dtsi b/arch/arm/dts/rk3566-pinetab2.dtsi new file mode 100644 index 000000000000..db40281eafbe --- /dev/null +++ b/arch/arm/dts/rk3566-pinetab2.dtsi @@ -0,0 +1,943 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> +#include "rk3566.dtsi"
+/ {
- chassis-type = "tablet";
- aliases {
mmc0 = &sdhci;mmc1 = &sdmmc0;- };
- chosen {
stdout-path = "serial2:1500000n8";- };
- adc-keys {
compatible = "adc-keys";io-channels = <&saradc 0>;io-channel-names = "buttons";keyup-threshold-microvolt = <1800000>;poll-interval = <25>;button-vol-up {label = "Volume Up";linux,code = <KEY_VOLUMEUP>;press-threshold-microvolt = <297500>;};button-vol-down {label = "Volume Down";linux,code = <KEY_VOLUMEDOWN>;press-threshold-microvolt = <1750>;};- };
- backlight: backlight {
compatible = "pwm-backlight";pwms = <&pwm4 0 25000 0>;brightness-levels = <20 220>;num-interpolated-steps = <200>;default-brightness-level = <100>;power-supply = <&vcc_sys>;- };
- battery: battery {
compatible = "simple-battery";charge-full-design-microamp-hours = <6000000>;charge-term-current-microamp = <300000>;constant-charge-current-max-microamp = <2000000>;constant-charge-voltage-max-microvolt = <4300000>;voltage-max-design-microvolt = <4350000>;voltage-min-design-microvolt = <3400000>;ocv-capacity-celsius = <20>;ocv-capacity-table-0 = <4322000 100>, <4250000 95>, <4192000 90>, <4136000 85>,<4080000 80>, <4022000 75>, <3972000 70>, <3928000 65>,<3885000 60>, <3833000 55>, <3798000 50>, <3780000 45>,<3776000 40>, <3773000 35>, <3755000 30>, <3706000 25>,<3640000 20>, <3589000 15>, <3535000 10>, <3492000 5>,<3400000 0>;- };
- gpio_keys: gpio-keys {
compatible = "gpio-keys";pinctrl-names = "default";pinctrl-0 = <&kb_id_det>;tablet-mode-switch {debounce-interval = <20>;gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;label = "Tablet Mode";linux,input-type = <EV_SW>;linux,code = <SW_TABLET_MODE>;};- };
- hdmi-connector {
compatible = "hdmi-connector";type = "d";port {hdmi_con_in: endpoint {remote-endpoint = <&hdmi_out_con>;};};- };
- led-0 {
compatible = "regulator-led";vled-supply = <&vcc5v0_flashled>;color = <LED_COLOR_ID_WHITE>;function = LED_FUNCTION_FLASH;- };
- rk817-sound {
compatible = "simple-audio-card";pinctrl-names = "default";pinctrl-0 = <&hp_det_l>;simple-audio-card,format = "i2s";simple-audio-card,name = "rk817_ext";simple-audio-card,mclk-fs = <256>;simple-audio-card,widgets ="Microphone", "Mic Jack","Headphone", "Headphones","Speaker", "Internal Speakers";simple-audio-card,routing ="MICR", "Mic Jack","Headphones", "HPOL","Headphones", "HPOR","Internal Speakers", "Speaker Amplifier OUTL","Internal Speakers", "Speaker Amplifier OUTR","Speaker Amplifier INL", "HPOL","Speaker Amplifier INR", "HPOR";simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;simple-audio-card,aux-devs = <&speaker_amp>;simple-audio-card,pin-switches = "Internal Speakers";simple-audio-card,cpu {sound-dai = <&i2s1_8ch>;};simple-audio-card,codec {sound-dai = <&rk817>;};- };
- speaker_amp: speaker-amplifier {
compatible = "simple-audio-amplifier";pinctrl-names = "default";pinctrl-0 = <&spk_ctl>;enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;sound-name-prefix = "Speaker Amplifier";VCC-supply = <&vcc_bat>;- };
- vcc_3v3: vcc-3v3-regulator {
compatible = "regulator-fixed";regulator-name = "vcc_3v3";regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;vin-supply = <&vcc3v3_sys>;- };
- vcc3v3_minipcie: vcc3v3-minipcie-regulator {
compatible = "regulator-fixed";enable-active-high;gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&pcie_pwren_h>;regulator-name = "vcc3v3_minipcie";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;vin-supply = <&vcc_sys>;- };
- vcc3v3_sd: vcc3v3-sd-regulator {
compatible = "regulator-fixed";gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&sdmmc_pwren_l>;regulator-name = "vcc3v3_sd";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;vin-supply = <&vcc3v3_sys>;- };
- vcc5v0_flashled: vcc5v0-flashled-regulator {
compatible = "regulator-fixed";enable-active-high;gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&flash_led_en_h>;regulator-name = "vcc5v0_flashled";regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;vin-supply = <&vcc5v_midu>;- };
- vcc5v0_usb_host0: vcc5v0-usb-host0-regulator {
compatible = "regulator-fixed";enable-active-high;gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&usb_host_pwren1_h>;regulator-name = "vcc5v0_usb_host0";regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;vin-supply = <&vcc5v_midu>;- };
- vcc5v0_usb_host2: vcc5v0-usb-host2-regulator {
compatible = "regulator-fixed";enable-active-high;gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;pinctrl-names = "default";pinctrl-0 = <&usb_host_pwren2_h>;regulator-name = "vcc5v0_usb_host2";regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;vin-supply = <&vcc5v_midu>;- };
- vcc_bat: vcc-bat-regulator {
compatible = "regulator-fixed";regulator-name = "vcc_bat";regulator-always-on;regulator-boot-on;- };
- vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";regulator-name = "vcc_sys";regulator-always-on;regulator-boot-on;vin-supply = <&vcc_bat>;- };
- vdd1v2_dvp: vdd1v2-dvp-regulator {
compatible = "regulator-fixed";regulator-name = "vdd1v2_dvp";regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;vin-supply = <&vcc_3v3>;- };
+};
+&combphy1 {
- status = "okay";
+};
+&combphy2 {
- status = "okay";
+};
+&cpu0 {
- cpu-supply = <&vdd_cpu>;
+};
+&cpu1 {
- cpu-supply = <&vdd_cpu>;
+};
+&cpu2 {
- cpu-supply = <&vdd_cpu>;
+};
+&cpu3 {
- cpu-supply = <&vdd_cpu>;
+};
+&cru {
- assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>;- assigned-clock-rates = <32768>, <1200000000>, <200000000>, <500000000>;
- assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
+};
+&csi_dphy {
- status = "okay";
+};
+&dsi0 {
- status = "okay";
- clock-master;
- #address-cells = <1>;
- #size-cells = <0>;
- lcd: panel@0 {
compatible = "boe,th101mb31ig002-28a";reg = <0>;backlight = <&backlight>;enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;rotation = <90>;power-supply = <&vcc_3v3>;port@0 {panel_in_dsi: endpoint@0 {remote-endpoint = <&dsi0_out_con>;};};- };
+};
+&dsi0_in {
- dsi0_in_vp1: endpoint {
remote-endpoint = <&vp1_out_dsi0>;- };
+};
+&dsi0_out {
- dsi0_out_con: endpoint {
remote-endpoint = <&panel_in_dsi>;- };
+};
+&dsi_dphy0 {
- status = "okay";
+};
+&gpu {
- mali-supply = <&vdd_gpu_npu>;
- status = "okay";
+};
+&hdmi {
- avdd-0v9-supply = <&vdda_0v9_p>;
- avdd-1v8-supply = <&vcc_1v8>;
- status = "okay";
+};
+&hdmi_in {
- hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;- };
+};
+&hdmi_out {
- hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;- };
+};
+&hdmi_sound {
- status = "okay";
+};
+&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
- vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";reg = <0x1c>;fcs,suspend-voltage-selector = <1>;regulator-name = "vdd_cpu";regulator-min-microvolt = <800000>;regulator-max-microvolt = <1150000>;regulator-ramp-delay = <2300>;regulator-always-on;regulator-boot-on;vin-supply = <&vcc_sys>;regulator-state-mem {regulator-off-in-suspend;};- };
- rk817: pmic@20 {
compatible = "rockchip,rk817";reg = <0x20>;interrupt-parent = <&gpio0>;interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;assigned-clocks = <&cru I2S1_MCLKOUT_TX>;assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;clock-names = "mclk";clocks = <&cru I2S1_MCLKOUT_TX>;clock-output-names = "rk808-clkout1", "rk808-clkout2";#clock-cells = <1>;pinctrl-names = "default";pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;rockchip,system-power-controller;#sound-dai-cells = <0>;wakeup-source;vcc1-supply = <&vcc_sys>;vcc2-supply = <&vcc_sys>;vcc3-supply = <&vcc_sys>;vcc4-supply = <&vcc_sys>;vcc5-supply = <&vcc_sys>;vcc6-supply = <&vcc_sys>;vcc7-supply = <&vcc_sys>;vcc8-supply = <&vcc_sys>;vcc9-supply = <&vcc5v_midu>;regulators {vdd_logic: DCDC_REG1 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <500000>;regulator-max-microvolt = <1350000>;regulator-ramp-delay = <6001>;regulator-initial-mode = <0x2>;regulator-name = "vdd_logic";regulator-state-mem {regulator-off-in-suspend;};};vdd_gpu_npu: DCDC_REG2 {regulator-min-microvolt = <500000>;regulator-max-microvolt = <1350000>;regulator-ramp-delay = <6001>;regulator-initial-mode = <0x2>;regulator-name = "vdd_gpu_npu";regulator-state-mem {regulator-off-in-suspend;};};vcc_ddr: DCDC_REG3 {regulator-always-on;regulator-boot-on;regulator-initial-mode = <0x2>;regulator-name = "vcc_ddr";regulator-state-mem {regulator-on-in-suspend;};};vcc3v3_sys: DCDC_REG4 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-initial-mode = <0x2>;regulator-name = "vcc3v3_sys";regulator-state-mem {regulator-off-in-suspend;};};vcca1v8_pmu: LDO_REG1 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-name = "vcca1v8_pmu";regulator-state-mem {regulator-on-in-suspend;};};vdda_0v9_p: LDO_REG2 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <900000>;regulator-max-microvolt = <900000>;regulator-name = "vdda_0v9_p";regulator-state-mem {regulator-off-in-suspend;};};vdda0v9_pmu: LDO_REG3 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <900000>;regulator-max-microvolt = <900000>;regulator-name = "vdda0v9_pmu";regulator-state-mem {regulator-on-in-suspend;};};vccio_acodec: LDO_REG4 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vccio_acodec";regulator-state-mem {regulator-off-in-suspend;};};vccio_sd: LDO_REG5 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <3300000>;regulator-name = "vccio_sd";regulator-state-mem {regulator-off-in-suspend;};};vcc3v3_pmu: LDO_REG6 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vcc3v3_pmu";regulator-state-mem {regulator-on-in-suspend;};};vcc_1v8: LDO_REG7 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-name = "vcc_1v8";regulator-state-mem {regulator-off-in-suspend;};};vcc1v8_dvp: LDO_REG8 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-name = "vcc1v8_dvp";regulator-state-mem {regulator-off-in-suspend;};};vcc2v8_dvp: LDO_REG9 {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <2800000>;regulator-max-microvolt = <2800000>;regulator-name = "vcc2v8_dvp";regulator-state-mem {regulator-off-in-suspend;};};vcc5v_midu: BOOST {regulator-always-on;regulator-boot-on;regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;regulator-name = "boost";regulator-state-mem {regulator-off-in-suspend;};};vbus: OTG_SWITCH {regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;regulator-name = "otg_switch";regulator-state-mem {regulator-off-in-suspend;};};};charger {monitored-battery = <&battery>;rockchip,resistor-sense-micro-ohms = <10000>;rockchip,sleep-enter-current-microamp = <300000>;rockchip,sleep-filter-current-microamp = <100000>;};- };
+};
+&i2c1 {
- clock-frequency = <400000>;
- status = "okay";
- touchscreen@5d {
compatible = "goodix,gt911";reg = <0x5d>;interrupt-parent = <&gpio0>;interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>;pinctrl-names = "default";pinctrl-0 = <&tp_int_l_pmuio2>, <&tp_rst_l_pmuio2>;AVDD28-supply = <&vcc3v3_pmu>;VDDIO-supply = <&vcca1v8_pmu>;irq-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;- };
+};
+&i2c2 {
- clock-frequency = <400000>;
- pinctrl-0 = <&i2c2m1_xfer>;
- status = "okay";
- vcm@c {
compatible = "dongwoon,dw9714";reg = <0x0c>;vcc-supply = <&vcc1v8_dvp>;- };
- camera@36 {
compatible = "ovti,ov5648";reg = <0x36>;pinctrl-names = "default";pinctrl-0 = <&camerab_pdn_l &camerab_rst_l>;clocks = <&cru CLK_CIF_OUT>;assigned-clocks = <&cru CLK_CIF_OUT>;assigned-clock-rates = <24000000>;avdd-supply = <&vcc2v8_dvp>;dvdd-supply = <&vdd1v2_dvp>;dovdd-supply = <&vcc1v8_dvp>;powerdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;port {endpoint {data-lanes = <1 2>;remote-endpoint = <0>;link-frequencies = /bits/ 64 <210000000 168000000>;};};- };
+};
+&i2c5 {
- clock-frequency = <400000>;
- status = "okay";
- accelerometer@18 {
compatible = "silan,sc7a20";reg = <0x18>;interrupt-parent = <&gpio3>;interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;pinctrl-names = "default";pinctrl-0 = <&gsensor_int_l>;st,drdy-int-pin = <1>;vdd-supply = <&vcc_1v8>;vddio-supply = <&vcc_1v8>;mount-matrix = "1", "0", "0","0", "0", "1","0", "1", "0";- };
+};
+&i2s0_8ch {
- status = "okay";
+};
+&i2s1_8ch {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1m0_sclktx
&i2s1m0_lrcktx&i2s1m0_sdi0&i2s1m0_sdo0>;- rockchip,trcm-sync-tx-only;
- status = "okay";
+};
+&pcie2x1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_reset_h>;
- reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_minipcie>;
- status = "okay";
+};
+&pinctrl {
- camerab {
camerab_pdn_l: camerab-pdn-l {rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;};camerab_rst_l: camerab-rst-l {rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- cameraf {
cameraf_pdn_l: cameraf-pdn-l {rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;};cameraf_rst_l: cameraf-rst-l {rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- flash {
flash_led_en_h: flash-led-en-h {rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- fspi {
fspi_dual_io_pins: fspi-dual-io-pins {rockchip,pins =/* fspi_clk */<1 RK_PD0 1 &pcfg_pull_none>,/* fspi_cs0n */<1 RK_PD3 1 &pcfg_pull_none>,/* fspi_d0 */<1 RK_PD1 1 &pcfg_pull_none>,/* fspi_d1 */<1 RK_PD2 1 &pcfg_pull_none>;};- };
- gsensor {
gsensor_int_l: gsensor-int-l {rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;};- };
- kb {
kb_id_det: kb-id-det {rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- lcd {
lcd_pwren_h: lcd-pwren-h {rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- pcie {
pcie_pwren_h: pcie-pwren-h {rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;};pcie_reset_h: pcie-reset-h {rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- pmic {
pmic_int_l: pmic-int-l {rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;};- };
- sdmmc {
sdmmc_pwren_l: sdmmc-pwren-l {rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- sound {
hp_det_l: hp-det-l {rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;};spk_ctl: spk-ctl {rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- tp {
tp_int_l_pmuio2: tp-int-l-pmuio2 {rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;};tp_rst_l_pmuio2: tp-rst-l-pmuio2 {rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- usb {
usbcc_int_l: usbcc-int-l {rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;};usb_host_pwren1_h: usb-host-pwren1-h {rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;};usb_host_pwren2_h: usb-host-pwren2-h {rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;};- };
- wifi {
host_wake_wl: host-wake-wl {rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;};wifi_wake_host_h: wifi-wake-host-h {rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;};- };
+};
+&pmu_io_domains {
- pmuio1-supply = <&vcc3v3_pmu>;
- pmuio2-supply = <&vcca1v8_pmu>;
- vccio1-supply = <&vccio_acodec>;
- vccio2-supply = <&vcc_1v8>;
- vccio3-supply = <&vccio_sd>;
- vccio4-supply = <&vcc_1v8>;
- vccio5-supply = <&vcc_1v8>;
- vccio6-supply = <&vcc1v8_dvp>;
- vccio7-supply = <&vcc_3v3>;
- status = "okay";
+};
+&pwm4 {
- status = "okay";
+};
+&saradc {
- vref-supply = <&vcc_1v8>;
- status = "okay";
+};
+&sdhci {
- bus-width = <8>;
- no-sdio;
- no-sd;
- non-removable;
- max-frequency = <200000000>;
- mmc-hs200-1_8v;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_bus8
&emmc_clk&emmc_cmd&emmc_datastrobe&emmc_rstnout>;- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_1v8>;
- status = "okay";
+};
+&sdmmc0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_bus4
&sdmmc0_clk&sdmmc0_cmd&sdmmc0_det>;- sd-uhs-sdr104;
- vmmc-supply = <&vcc3v3_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
+};
+&sdmmc1 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_bus4
&sdmmc1_cmd&sdmmc1_clk>;- sd-uhs-sdr104;
- vqmmc-supply = <&vcca1v8_pmu>;
- status = "okay";
+};
+&sfc {
- pinctrl-names = "default";
- pinctrl-0 = <&fspi_dual_io_pins>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
- flash@0 {
compatible = "jedec,spi-nor";reg = <0>;spi-max-frequency = <100000000>;spi-rx-bus-width = <2>;spi-tx-bus-width = <1>;- };
+};
+&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <0>;
- status = "okay";
+};
+&uart2 {
- status = "okay";
+};
+&usb_host0_ehci {
- status = "okay";
+};
+&usb_host0_ohci {
- status = "okay";
+};
+&usb_host0_xhci {
- status = "okay";
+};
+&usb_host1_xhci {
- status = "okay";
+};
+&usb2phy0 {
- status = "okay";
+};
+&usb2phy0_host {
- phy-supply = <&vcc5v0_usb_host0>;
- status = "okay";
+};
+&usb2phy0_otg {
- status = "okay";
+};
+&usb2phy1 {
- status = "okay";
+};
+&usb2phy1_otg {
- phy-supply = <&vcc5v0_usb_host2>;
- status = "okay";
+};
+&vop {
- assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
- assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
- status = "okay";
+};
+&vop_mmu {
- status = "okay";
+};
+&vp0 {
- vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;remote-endpoint = <&hdmi_in_vp0>;- };
+};
+&vp1 {
- vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
reg = <ROCKCHIP_VOP2_EP_MIPI0>;remote-endpoint = <&dsi0_in_vp1>;- };
+}; diff --git a/board/pine64/quartz64_rk3566/MAINTAINERS b/board/pine64/quartz64_rk3566/MAINTAINERS index 6b75b35a1243..37b8c1eb78b6 100644 --- a/board/pine64/quartz64_rk3566/MAINTAINERS +++ b/board/pine64/quartz64_rk3566/MAINTAINERS @@ -21,3 +21,14 @@ F: arch/arm/dts/rk3566-soquartz-cm4.dts F: arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi F: arch/arm/dts/rk3566-soquartz-model-a.dts F: arch/arm/dts/rk3566-soquartz-model-a-u-boot.dtsi
+PINETAB2-RK3566 +M: Jonas Karlman jonas@kwiboo.se +S: Maintained +F: configs/pinetab2-rk3566_defconfig +F: arch/arm/dts/rk3566-pinetab2.dtsi +F: arch/arm/dts/rk3566-pinetab2-u-boot.dtsi +F: arch/arm/dts/rk3566-pinetab2-v0.1.dts +F: arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi +F: arch/arm/dts/rk3566-pinetab2-v2.0.dts +F: arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig new file mode 100644 index 000000000000..19b396eef975 --- /dev/null +++ b/configs/pinetab2-rk3566_defconfig @@ -0,0 +1,119 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_TEXT_BASE=0x00a00000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x1000 +CONFIG_DEFAULT_DEVICE_TREE="rk3566-pinetab2-v2.0" +CONFIG_ROCKCHIP_RK3568=y +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_TARGET_QUARTZ64_RK3566=y +CONFIG_SPL_STACK=0x400000 +CONFIG_DEBUG_UART_BASE=0xFE660000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-pinetab2-v2.0.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_LIST="rk3566-pinetab2-v0.1 rk3566-pinetab2-v2.0" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_BUTTON=y +CONFIG_BUTTON_ADC=y +CONFIG_BUTTON_GPIO=y +CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=4 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_SILICONKAISER=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_SPL_PMIC_RK8XX=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_PRODUCT_NUM=0x350a +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 9fe69fc9422f..fda2282b2c26 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -93,6 +93,7 @@ List of mainline supported Rockchip boards:
- rk3566
- Anbernic RGxx3 (anbernic-rgxx3-rk3566)
- Pine64 PineTab2 (pinetab2-rk3566) - Pine64 Quartz64-A Board (quartz64-a-rk3566) - Pine64 Quartz64-B Board (quartz64-b-rk3566) - Pine64 SOQuartz on Blade (soquartz-blade-rk3566)