From: Kongyang Liu seashell11234455@gmail.com
The same registers are accessed in both the otg and gatet drivers of dwc2, and these registers are repeatedly defined in these two parts. Extract register definitions into a common header file to reduce redundancy and make the code more maintainable.
Signed-off-by: Kongyang Liu seashell11234455@gmail.com Signed-off-by: Junhui Liu liujh2818@outlook.com --- drivers/usb/common/dwc2_core.h | 126 ++++++++++++++++++ drivers/usb/gadget/dwc2_udc_otg.c | 94 +++++++------- drivers/usb/gadget/dwc2_udc_otg_regs.h | 68 +--------- drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 201 +++++++++++++++-------------- drivers/usb/host/dwc2.c | 102 ++++++++------- drivers/usb/host/dwc2.h | 58 --------- 6 files changed, 332 insertions(+), 317 deletions(-)
diff --git a/drivers/usb/common/dwc2_core.h b/drivers/usb/common/dwc2_core.h new file mode 100644 index 0000000000000000000000000000000000000000..26483a57e7df58e2b9fe820367e1680b9251af8d --- /dev/null +++ b/drivers/usb/common/dwc2_core.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2024, Kongyang Liu seashell11234455@gmail.com + * + */ + +#ifndef __DWC2_CORE_H_ +#define __DWC2_CORE_H_ + +struct dwc2_global_regs { + u32 gotgctl; /* 0x000 */ + u32 gotgint; + u32 gahbcfg; + u32 gusbcfg; + u32 grstctl; /* 0x010 */ + u32 gintsts; + u32 gintmsk; + u32 grxstsr; + u32 grxstsp; /* 0x020 */ + u32 grxfsiz; + u32 gnptxfsiz; + u32 gnptxsts; + u32 gi2cctl; /* 0x030 */ + u32 gpvndctl; + u32 ggpio; + u32 guid; + u32 gsnpsid; /* 0x040 */ + u32 ghwcfg1; + u32 ghwcfg2; + u32 ghwcfg3; + u32 ghwcfg4; /* 0x050 */ + u32 glpmcfg; + u32 gpwrdn; + u32 gdfifocfg; + u32 gadpctl; /* 0x060 */ + u32 grefclk; + u32 gintmsk2; + u32 gintsts2; + u8 _pad_from_0x70_to_0x100[0x100 - 0x70]; + u32 hptxfsiz; /* 0x100 */ + u32 dptxfsizn[15]; + u8 _pad_from_0x140_to_0x400[0x400 - 0x140]; +}; + +struct dwc2_hc_regs { + u32 hcchar; /* 0x500 + 0x20 * ch */ + u32 hcsplt; + u32 hcint; + u32 hcintmsk; + u32 hctsiz; + u32 hcdma; + u32 reserved; + u32 hcdmab; +}; + +struct dwc2_host_regs { + u32 hcfg; /* 0x400 */ + u32 hfir; + u32 hfnum; + u32 _pad_0x40c; + u32 hptxsts; /* 0x410 */ + u32 haint; + u32 haintmsk; + u32 hflbaddr; + u8 _pad_from_0x420_to_0x440[0x440 - 0x420]; + u32 hprt0; /* 0x440 */ + u8 _pad_from_0x444_to_0x500[0x500 - 0x444]; + struct dwc2_hc_regs hc[16]; /* 0x500 */ + u8 _pad_from_0x700_to_0x800[0x800 - 0x700]; +}; + +/* Device Logical IN Endpoint-Specific Registers */ +struct dwc2_dev_in_endp { + u32 diepctl; /* 0x900 + 0x20 * ep */ + u32 reserved0; + u32 diepint; + u32 reserved1; + u32 dieptsiz; + u32 diepdma; + u32 reserved2; + u32 diepdmab; +}; + +/* Device Logical OUT Endpoint-Specific Registers */ +struct dwc2_dev_out_endp { + u32 doepctl; /* 0xB00 + 0x20 * ep */ + u32 reserved0; + u32 doepint; + u32 reserved1; + u32 doeptsiz; + u32 doepdma; + u32 reserved2; + u32 doepdmab; +}; + +struct dwc2_device_regs { + u32 dcfg; /* 0x800 */ + u32 dctl; + u32 dsts; + u32 _pad_0x80c; + u32 diepmsk; /* 0x810 */ + u32 doepmsk; + u32 daint; + u32 daintmsk; + u32 dtknqr1; /* 0x820 */ + u32 dtknqr2; + u32 dvbusdis; + u32 dvbuspulse; + u32 dtknqr3; /* 0x830 */ + u32 dtknqr4; + u8 _pad_from_0x838_to_0x900[0x900 - 0x838]; + struct dwc2_dev_in_endp in_endp[16]; /* 0x900 */ + struct dwc2_dev_out_endp out_endp[16]; /* 0xB00 */ +}; + +struct dwc2_core_regs { + struct dwc2_global_regs global_regs; /* 0x000 */ + struct dwc2_host_regs host_regs; /* 0x400 */ + struct dwc2_device_regs device_regs; /* 0x800 */ + u8 _pad_from_0xd00_to_0xe00[0xe00 - 0xd00]; + u32 pcgcctl; /* 0xe00 */ + u8 _pad_from_0xe04_to_0x1000[0x1000 - 0xe04]; + u8 ep_fifo[16][0x1000]; /* 0x1000 */ +}; + +#endif /* __DWC2_CORE_H_ */ diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c index 7e9dd6f4268d3d80bf0572d71e267fbd26ce1516..c3dee8771e6c98692dd2ed6b50ca3c6ea21782af 100644 --- a/drivers/usb/gadget/dwc2_udc_otg.c +++ b/drivers/usb/gadget/dwc2_udc_otg.c @@ -45,6 +45,7 @@
#include <power/regulator.h>
+#include "../common/dwc2_core.h" #include "dwc2_udc_otg_regs.h" #include "dwc2_udc_otg_priv.h"
@@ -154,11 +155,11 @@ static struct usb_ep_ops dwc2_ep_ops = {
/***********************************************************/
-struct dwc2_usbotg_reg *reg; +struct dwc2_core_regs *reg;
bool dfu_usb_get_reset(void) { - return !!(readl(®->gintsts) & INT_RESET); + return !!(readl(®->global_regs.gintsts) & INT_RESET); }
__weak void otg_phy_init(struct dwc2_udc *dev) {} @@ -229,7 +230,7 @@ static int udc_enable(struct dwc2_udc *dev)
debug_cond(DEBUG_SETUP != 0, "DWC2 USB 2.0 OTG Controller Core Initialized : 0x%x\n", - readl(®->gintmsk)); + readl(®->global_regs.gintmsk));
dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -238,7 +239,7 @@ static int udc_enable(struct dwc2_udc *dev)
static int dwc2_gadget_pullup(struct usb_gadget *g, int is_on) { - clrsetbits_le32(®->dctl, SOFT_DISCONNECT, + clrsetbits_le32(®->device_regs.dctl, SOFT_DISCONNECT, is_on ? 0 : SOFT_DISCONNECT);
return 0; @@ -463,12 +464,14 @@ static void reconfig_usbd(struct dwc2_udc *dev) { /* 2. Soft-reset OTG Core and then unreset again. */ int i; - unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl); + unsigned int uTemp; uint32_t dflt_gusbcfg; uint32_t rx_fifo_sz, tx_fifo_sz, np_tx_fifo_sz; u32 max_hw_ep; int pdata_hw_ep;
+ writel(CORE_SOFT_RESET, ®->global_regs.grstctl); + debug("Resetting OTG controller\n");
dflt_gusbcfg = @@ -490,47 +493,47 @@ static void reconfig_usbd(struct dwc2_udc *dev) if (dev->pdata->usb_gusbcfg) dflt_gusbcfg = dev->pdata->usb_gusbcfg;
- writel(dflt_gusbcfg, ®->gusbcfg); + writel(dflt_gusbcfg, ®->global_regs.gusbcfg);
/* 3. Put the OTG device core in the disconnected state.*/ - uTemp = readl(®->dctl); + uTemp = readl(®->device_regs.dctl); uTemp |= SOFT_DISCONNECT; - writel(uTemp, ®->dctl); + writel(uTemp, ®->device_regs.dctl);
udelay(20);
/* 4. Make the OTG device core exit from the disconnected state.*/ - uTemp = readl(®->dctl); + uTemp = readl(®->device_regs.dctl); uTemp = uTemp & ~SOFT_DISCONNECT; - writel(uTemp, ®->dctl); + writel(uTemp, ®->device_regs.dctl);
/* 5. Configure OTG Core to initial settings of device mode.*/ /* [][1: full speed(30Mhz) 0:high speed]*/ - writel(EP_MISS_CNT(1) | DEV_SPEED_HIGH_SPEED_20, ®->dcfg); + writel(EP_MISS_CNT(1) | DEV_SPEED_HIGH_SPEED_20, ®->device_regs.dcfg);
mdelay(1);
/* 6. Unmask the core interrupts*/ - writel(GINTMSK_INIT, ®->gintmsk); + writel(GINTMSK_INIT, ®->global_regs.gintmsk);
/* 7. Set NAK bit of EP0, EP1, EP2*/ - writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->out_endp[EP0_CON].doepctl); - writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->in_endp[EP0_CON].diepctl); + writel(DEPCTL_EPDIS | DEPCTL_SNAK, ®->device_regs.out_endp[EP0_CON].doepctl); + writel(DEPCTL_EPDIS | DEPCTL_SNAK, ®->device_regs.in_endp[EP0_CON].diepctl);
for (i = 1; i < DWC2_MAX_ENDPOINTS; i++) { - writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->out_endp[i].doepctl); - writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->in_endp[i].diepctl); + writel(DEPCTL_EPDIS | DEPCTL_SNAK, ®->device_regs.out_endp[i].doepctl); + writel(DEPCTL_EPDIS | DEPCTL_SNAK, ®->device_regs.in_endp[i].diepctl); }
/* 8. Unmask EPO interrupts*/ writel(((1 << EP0_CON) << DAINT_OUT_BIT) - | (1 << EP0_CON), ®->daintmsk); + | (1 << EP0_CON), ®->device_regs.daintmsk);
/* 9. Unmask device OUT EP common interrupts*/ - writel(DOEPMSK_INIT, ®->doepmsk); + writel(DOEPMSK_INIT, ®->device_regs.doepmsk);
/* 10. Unmask device IN EP common interrupts*/ - writel(DIEPMSK_INIT, ®->diepmsk); + writel(DIEPMSK_INIT, ®->device_regs.diepmsk);
rx_fifo_sz = RX_FIFO_SIZE; np_tx_fifo_sz = NPTX_FIFO_SIZE; @@ -544,14 +547,14 @@ static void reconfig_usbd(struct dwc2_udc *dev) tx_fifo_sz = dev->pdata->tx_fifo_sz;
/* 11. Set Rx FIFO Size (in 32-bit words) */ - writel(rx_fifo_sz, ®->grxfsiz); + writel(rx_fifo_sz, ®->global_regs.grxfsiz);
/* 12. Set Non Periodic Tx FIFO Size */ writel((np_tx_fifo_sz << 16) | rx_fifo_sz, - ®->gnptxfsiz); + ®->global_regs.gnptxfsiz);
/* retrieve the number of IN Endpoints (excluding ep0) */ - max_hw_ep = (readl(®->ghwcfg4) & GHWCFG4_NUM_IN_EPS_MASK) >> + max_hw_ep = (readl(®->global_regs.ghwcfg4) & GHWCFG4_NUM_IN_EPS_MASK) >> GHWCFG4_NUM_IN_EPS_SHIFT; pdata_hw_ep = dev->pdata->tx_fifo_sz_nb;
@@ -565,27 +568,27 @@ static void reconfig_usbd(struct dwc2_udc *dev) tx_fifo_sz = dev->pdata->tx_fifo_sz_array[i];
writel((rx_fifo_sz + np_tx_fifo_sz + (tx_fifo_sz * i)) | - tx_fifo_sz << 16, ®->dieptxf[i]); + tx_fifo_sz << 16, ®->global_regs.dptxfsizn[i]); } /* Flush the RX FIFO */ - writel(RX_FIFO_FLUSH, ®->grstctl); - while (readl(®->grstctl) & RX_FIFO_FLUSH) + writel(RX_FIFO_FLUSH, ®->global_regs.grstctl); + while (readl(®->global_regs.grstctl) & RX_FIFO_FLUSH) debug("%s: waiting for DWC2_UDC_OTG_GRSTCTL\n", __func__);
/* Flush all the Tx FIFO's */ - writel(TX_FIFO_FLUSH_ALL, ®->grstctl); - writel(TX_FIFO_FLUSH_ALL | TX_FIFO_FLUSH, ®->grstctl); - while (readl(®->grstctl) & TX_FIFO_FLUSH) + writel(TX_FIFO_FLUSH_ALL, ®->global_regs.grstctl); + writel(TX_FIFO_FLUSH_ALL | TX_FIFO_FLUSH, ®->global_regs.grstctl); + while (readl(®->global_regs.grstctl) & TX_FIFO_FLUSH) debug("%s: waiting for DWC2_UDC_OTG_GRSTCTL\n", __func__);
/* 13. Clear NAK bit of EP0, EP1, EP2*/ /* For Slave mode*/ /* EP0: Control OUT */ writel(DEPCTL_EPDIS | DEPCTL_CNAK, - ®->out_endp[EP0_CON].doepctl); + ®->device_regs.out_endp[EP0_CON].doepctl);
/* 14. Initialize OTG Link Core.*/ - writel(GAHBCFG_INIT, ®->gahbcfg); + writel(GAHBCFG_INIT, ®->global_regs.gahbcfg); }
static void set_max_pktsize(struct dwc2_udc *dev, enum usb_device_speed speed) @@ -610,12 +613,12 @@ static void set_max_pktsize(struct dwc2_udc *dev, enum usb_device_speed speed) dev->ep[i].ep.maxpacket = ep_fifo_size;
/* EP0 - Control IN (64 bytes)*/ - ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); - writel(ep_ctrl|(0<<0), ®->in_endp[EP0_CON].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[EP0_CON].diepctl); + writel(ep_ctrl | (0 << 0), ®->device_regs.in_endp[EP0_CON].diepctl);
/* EP0 - Control OUT (64 bytes)*/ - ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); - writel(ep_ctrl|(0<<0), ®->out_endp[EP0_CON].doepctl); + ep_ctrl = readl(®->device_regs.out_endp[EP0_CON].doepctl); + writel(ep_ctrl | (0 << 0), ®->device_regs.out_endp[EP0_CON].doepctl); }
static int dwc2_ep_enable(struct usb_ep *_ep, @@ -904,7 +907,7 @@ int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata)
dev->pdata = pdata;
- reg = (struct dwc2_usbotg_reg *)pdata->regs_otg; + reg = (struct dwc2_core_regs *)pdata->regs_otg;
dev->gadget.is_dualspeed = 1; /* Hack only*/ dev->gadget.is_otg = 0; @@ -932,8 +935,8 @@ int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata)
int dwc2_udc_handle_interrupt(void) { - u32 intr_status = readl(®->gintsts); - u32 gintmsk = readl(®->gintmsk); + u32 intr_status = readl(®->global_regs.gintsts); + u32 gintmsk = readl(®->global_regs.gintmsk);
if (intr_status & gintmsk) return dwc2_udc_irq(1, (void *)the_controller); @@ -1087,8 +1090,8 @@ static int dwc2_udc_otg_probe(struct udevice *dev) { struct dwc2_plat_otg_data *plat = dev_get_plat(dev); struct dwc2_priv_data *priv = dev_get_priv(dev); - struct dwc2_usbotg_reg *usbotg_reg = - (struct dwc2_usbotg_reg *)plat->regs_otg; + struct dwc2_core_reg *usbotg_reg = + (struct dwc2_core_reg *)plat->regs_otg; int ret;
ret = dwc2_udc_otg_clk_init(dev, &priv->clks); @@ -1123,21 +1126,22 @@ static int dwc2_udc_otg_probe(struct udevice *dev) if (plat->force_b_session_valid && !plat->force_vbus_detection) { /* Override VBUS detection: enable then value*/ - setbits_le32(&usbotg_reg->gotgctl, VB_VALOEN); - setbits_le32(&usbotg_reg->gotgctl, VB_VALOVAL); + setbits_le32(&usbotg_reg->global_regs.gotgctl, VB_VALOEN); + setbits_le32(&usbotg_reg->global_regs.gotgctl, VB_VALOVAL); } else { /* Enable VBUS sensing */ - setbits_le32(&usbotg_reg->ggpio, + setbits_le32(&usbotg_reg->global_regs.ggpio, GGPIO_STM32_OTG_GCCFG_VBDEN); } if (plat->force_b_session_valid) { /* Override B session bits: enable then value */ - setbits_le32(&usbotg_reg->gotgctl, A_VALOEN | B_VALOEN); - setbits_le32(&usbotg_reg->gotgctl, + setbits_le32(&usbotg_reg->global_regs.gotgctl, + A_VALOEN | B_VALOEN); + setbits_le32(&usbotg_reg->global_regs.gotgctl, A_VALOVAL | B_VALOVAL); } else { /* Enable ID detection */ - setbits_le32(&usbotg_reg->ggpio, + setbits_le32(&usbotg_reg->global_regs.ggpio, GGPIO_STM32_OTG_GCCFG_IDEN); } } diff --git a/drivers/usb/gadget/dwc2_udc_otg_regs.h b/drivers/usb/gadget/dwc2_udc_otg_regs.h index 01056fab1c21a136fcf75d9b89f397df1aa869f3..198ba7a7c37d05dca084ef017534265f5fb5fd70 100644 --- a/drivers/usb/gadget/dwc2_udc_otg_regs.h +++ b/drivers/usb/gadget/dwc2_udc_otg_regs.h @@ -10,80 +10,14 @@ #ifndef __ASM_ARCH_REGS_USB_OTG_HS_H #define __ASM_ARCH_REGS_USB_OTG_HS_H
-/* USB2.0 OTG Controller register */ #include <linux/bitops.h> + struct dwc2_usbotg_phy { u32 phypwr; u32 phyclk; u32 rstcon; };
-/* Device Logical IN Endpoint-Specific Registers */ -struct dwc2_dev_in_endp { - u32 diepctl; - u8 res1[4]; - u32 diepint; - u8 res2[4]; - u32 dieptsiz; - u32 diepdma; - u8 res3[4]; - u32 diepdmab; -}; - -/* Device Logical OUT Endpoint-Specific Registers */ -struct dwc2_dev_out_endp { - u32 doepctl; - u8 res1[4]; - u32 doepint; - u8 res2[4]; - u32 doeptsiz; - u32 doepdma; - u8 res3[4]; - u32 doepdmab; -}; - -struct ep_fifo { - u32 fifo; - u8 res[4092]; -}; - -/* USB2.0 OTG Controller register */ -struct dwc2_usbotg_reg { - /* Core Global Registers */ - u32 gotgctl; /* OTG Control & Status */ - u32 gotgint; /* OTG Interrupt */ - u32 gahbcfg; /* Core AHB Configuration */ - u32 gusbcfg; /* Core USB Configuration */ - u32 grstctl; /* Core Reset */ - u32 gintsts; /* Core Interrupt */ - u32 gintmsk; /* Core Interrupt Mask */ - u32 grxstsr; /* Receive Status Debug Read/Status Read */ - u32 grxstsp; /* Receive Status Debug Pop/Status Pop */ - u32 grxfsiz; /* Receive FIFO Size */ - u32 gnptxfsiz; /* Non-Periodic Transmit FIFO Size */ - u8 res0[12]; - u32 ggpio; /* 0x038 */ - u8 res1[20]; - u32 ghwcfg4; /* User HW Config4 */ - u8 res2[176]; - u32 dieptxf[15]; /* Device Periodic Transmit FIFO size register */ - u8 res3[1728]; - /* Device Configuration */ - u32 dcfg; /* Device Configuration Register */ - u32 dctl; /* Device Control */ - u32 dsts; /* Device Status */ - u8 res4[4]; - u32 diepmsk; /* Device IN Endpoint Common Interrupt Mask */ - u32 doepmsk; /* Device OUT Endpoint Common Interrupt Mask */ - u32 daint; /* Device All Endpoints Interrupt */ - u32 daintmsk; /* Device All Endpoints Interrupt Mask */ - u8 res5[224]; - struct dwc2_dev_in_endp in_endp[16]; - struct dwc2_dev_out_endp out_endp[16]; - u8 res6[768]; - struct ep_fifo ep[16]; -}; - /*===================================================================== */ /*definitions related to CSR setting */
diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c index c0408bae0768cd81fa50de946dee4aa08c1059f8..e2a24c53b4c8d632163484d52b4338820dcb1731 100644 --- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c +++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c @@ -32,15 +32,16 @@ static inline void dwc2_udc_ep0_zlp(struct dwc2_udc *dev) { u32 ep_ctrl;
- writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), ®->in_endp[EP0_CON].diepdma); - writel(DIEPT_SIZ_PKT_CNT(1), ®->in_endp[EP0_CON].dieptsiz); + writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), + ®->device_regs.in_endp[EP0_CON].diepdma); + writel(DIEPT_SIZ_PKT_CNT(1), ®->device_regs.in_endp[EP0_CON].dieptsiz);
- ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); - writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, - ®->in_endp[EP0_CON].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[EP0_CON].diepctl); + writel(ep_ctrl | DEPCTL_EPENA | DEPCTL_CNAK, + ®->device_regs.in_endp[EP0_CON].diepctl);
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n", - __func__, readl(®->in_endp[EP0_CON].diepctl)); + __func__, readl(®->device_regs.in_endp[EP0_CON].diepctl)); dev->ep0state = WAIT_FOR_IN_COMPLETE; }
@@ -52,16 +53,17 @@ static void dwc2_udc_pre_setup(void) "%s : Prepare Setup packets.\n", __func__);
writel(DOEPT_SIZ_PKT_CNT(1) | sizeof(struct usb_ctrlrequest), - ®->out_endp[EP0_CON].doeptsiz); - writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), ®->out_endp[EP0_CON].doepdma); + ®->device_regs.out_endp[EP0_CON].doeptsiz); + writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), + ®->device_regs.out_endp[EP0_CON].doepdma);
- ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); - writel(ep_ctrl|DEPCTL_EPENA, ®->out_endp[EP0_CON].doepctl); + ep_ctrl = readl(®->device_regs.out_endp[EP0_CON].doepctl); + writel(ep_ctrl | DEPCTL_EPENA, ®->device_regs.out_endp[EP0_CON].doepctl);
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n", - __func__, readl(®->in_endp[EP0_CON].diepctl)); + __func__, readl(®->device_regs.in_endp[EP0_CON].diepctl)); debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n", - __func__, readl(®->out_endp[EP0_CON].doepctl)); + __func__, readl(®->device_regs.out_endp[EP0_CON].doepctl));
}
@@ -70,25 +72,26 @@ static inline void dwc2_ep0_complete_out(void) u32 ep_ctrl;
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n", - __func__, readl(®->in_endp[EP0_CON].diepctl)); + __func__, readl(®->device_regs.in_endp[EP0_CON].diepctl)); debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n", - __func__, readl(®->out_endp[EP0_CON].doepctl)); + __func__, readl(®->device_regs.out_endp[EP0_CON].doepctl));
debug_cond(DEBUG_IN_EP, "%s : Prepare Complete Out packet.\n", __func__);
writel(DOEPT_SIZ_PKT_CNT(1) | sizeof(struct usb_ctrlrequest), - ®->out_endp[EP0_CON].doeptsiz); - writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), ®->out_endp[EP0_CON].doepdma); + ®->device_regs.out_endp[EP0_CON].doeptsiz); + writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), + ®->device_regs.out_endp[EP0_CON].doepdma);
- ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); - writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, - ®->out_endp[EP0_CON].doepctl); + ep_ctrl = readl(®->device_regs.out_endp[EP0_CON].doepctl); + writel(ep_ctrl | DEPCTL_EPENA | DEPCTL_CNAK, + ®->device_regs.out_endp[EP0_CON].doepctl);
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n", - __func__, readl(®->in_endp[EP0_CON].diepctl)); + __func__, readl(®->device_regs.in_endp[EP0_CON].diepctl)); debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n", - __func__, readl(®->out_endp[EP0_CON].doepctl)); + __func__, readl(®->device_regs.out_endp[EP0_CON].doepctl));
}
@@ -110,25 +113,25 @@ static int setdma_rx(struct dwc2_ep *ep, struct dwc2_request *req) else pktcnt = (length - 1)/(ep->ep.maxpacket) + 1;
- ctrl = readl(®->out_endp[ep_num].doepctl); + ctrl = readl(®->device_regs.out_endp[ep_num].doepctl);
invalidate_dcache_range((unsigned long) ep->dma_buf, (unsigned long) ep->dma_buf + ROUND(ep->len, CONFIG_SYS_CACHELINE_SIZE));
- writel(phys_to_bus((unsigned long)ep->dma_buf), ®->out_endp[ep_num].doepdma); + writel(phys_to_bus((unsigned long)ep->dma_buf), ®->device_regs.out_endp[ep_num].doepdma); writel(DOEPT_SIZ_PKT_CNT(pktcnt) | DOEPT_SIZ_XFER_SIZE(length), - ®->out_endp[ep_num].doeptsiz); - writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, ®->out_endp[ep_num].doepctl); + ®->device_regs.out_endp[ep_num].doeptsiz); + writel(DEPCTL_EPENA | DEPCTL_CNAK | ctrl, ®->device_regs.out_endp[ep_num].doepctl);
debug_cond(DEBUG_OUT_EP != 0, "%s: EP%d RX DMA start : DOEPDMA = 0x%x," "DOEPTSIZ = 0x%x, DOEPCTL = 0x%x\n" "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n", __func__, ep_num, - readl(®->out_endp[ep_num].doepdma), - readl(®->out_endp[ep_num].doeptsiz), - readl(®->out_endp[ep_num].doepctl), + readl(®->device_regs.out_endp[ep_num].doepdma), + readl(®->device_regs.out_endp[ep_num].doeptsiz), + readl(®->device_regs.out_endp[ep_num].doepctl), buf, pktcnt, length); return 0;
@@ -159,16 +162,16 @@ static int setdma_tx(struct dwc2_ep *ep, struct dwc2_request *req) pktcnt = (length - 1)/(ep->ep.maxpacket) + 1;
/* Flush the endpoint's Tx FIFO */ - writel(TX_FIFO_NUMBER(ep->fifo_num), ®->grstctl); - writel(TX_FIFO_NUMBER(ep->fifo_num) | TX_FIFO_FLUSH, ®->grstctl); - while (readl(®->grstctl) & TX_FIFO_FLUSH) + writel(TX_FIFO_NUMBER(ep->fifo_num), ®->global_regs.grstctl); + writel(TX_FIFO_NUMBER(ep->fifo_num) | TX_FIFO_FLUSH, ®->global_regs.grstctl); + while (readl(®->global_regs.grstctl) & TX_FIFO_FLUSH) ;
- writel(phys_to_bus((unsigned long)ep->dma_buf), ®->in_endp[ep_num].diepdma); + writel(phys_to_bus((unsigned long)ep->dma_buf), ®->device_regs.in_endp[ep_num].diepdma); writel(DIEPT_SIZ_PKT_CNT(pktcnt) | DIEPT_SIZ_XFER_SIZE(length), - ®->in_endp[ep_num].dieptsiz); + ®->device_regs.in_endp[ep_num].dieptsiz);
- ctrl = readl(®->in_endp[ep_num].diepctl); + ctrl = readl(®->device_regs.in_endp[ep_num].diepctl);
/* Write the FIFO number to be used for this endpoint */ ctrl &= DIEPCTL_TX_FIFO_NUM_MASK; @@ -177,16 +180,16 @@ static int setdma_tx(struct dwc2_ep *ep, struct dwc2_request *req) /* Clear reserved (Next EP) bits */ ctrl = (ctrl&~(EP_MASK<<DEPCTL_NEXT_EP_BIT));
- writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, ®->in_endp[ep_num].diepctl); + writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, ®->device_regs.in_endp[ep_num].diepctl);
debug_cond(DEBUG_IN_EP, "%s:EP%d TX DMA start : DIEPDMA0 = 0x%x," "DIEPTSIZ0 = 0x%x, DIEPCTL0 = 0x%x\n" "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n", __func__, ep_num, - readl(®->in_endp[ep_num].diepdma), - readl(®->in_endp[ep_num].dieptsiz), - readl(®->in_endp[ep_num].diepctl), + readl(®->device_regs.in_endp[ep_num].diepdma), + readl(®->device_regs.in_endp[ep_num].dieptsiz), + readl(®->device_regs.in_endp[ep_num].diepctl), buf, pktcnt, length);
return length; @@ -207,7 +210,7 @@ static void complete_rx(struct dwc2_udc *dev, u8 ep_num) }
req = list_entry(ep->queue.next, struct dwc2_request, queue); - ep_tsr = readl(®->out_endp[ep_num].doeptsiz); + ep_tsr = readl(®->device_regs.out_endp[ep_num].doeptsiz);
if (ep_num == EP0_CON) xfer_size = (ep_tsr & DOEPT_SIZ_XFER_SIZE_MAX_EP0); @@ -288,7 +291,7 @@ static void complete_tx(struct dwc2_udc *dev, u8 ep_num)
req = list_entry(ep->queue.next, struct dwc2_request, queue);
- ep_tsr = readl(®->in_endp[ep_num].dieptsiz); + ep_tsr = readl(®->device_regs.in_endp[ep_num].dieptsiz);
xfer_size = ep->len; is_short = (xfer_size < ep->ep.maxpacket); @@ -373,7 +376,7 @@ static void process_ep_in_intr(struct dwc2_udc *dev) u32 ep_intr, ep_intr_status; u8 ep_num = 0;
- ep_intr = readl(®->daint); + ep_intr = readl(®->device_regs.daint); debug_cond(DEBUG_IN_EP, "*** %s: EP In interrupt : DAINT = 0x%x\n", __func__, ep_intr);
@@ -381,13 +384,13 @@ static void process_ep_in_intr(struct dwc2_udc *dev)
while (ep_intr) { if (ep_intr & DAINT_IN_EP_INT(1)) { - ep_intr_status = readl(®->in_endp[ep_num].diepint); + ep_intr_status = readl(®->device_regs.in_endp[ep_num].diepint); debug_cond(DEBUG_IN_EP, "\tEP%d-IN : DIEPINT = 0x%x\n", ep_num, ep_intr_status);
/* Interrupt Clear */ - writel(ep_intr_status, ®->in_endp[ep_num].diepint); + writel(ep_intr_status, ®->device_regs.in_endp[ep_num].diepint);
if (ep_intr_status & TRANSFER_DONE) { complete_tx(dev, ep_num); @@ -420,10 +423,10 @@ static void process_ep_out_intr(struct dwc2_udc *dev) u32 ep_intr, ep_intr_status; u8 ep_num = 0; u32 ep_tsr = 0, xfer_size = 0; - u32 epsiz_reg = reg->out_endp[ep_num].doeptsiz; + u32 epsiz_reg = reg->device_regs.out_endp[ep_num].doeptsiz; u32 req_size = sizeof(struct usb_ctrlrequest);
- ep_intr = readl(®->daint); + ep_intr = readl(®->device_regs.daint); debug_cond(DEBUG_OUT_EP != 0, "*** %s: EP OUT interrupt : DAINT = 0x%x\n", __func__, ep_intr); @@ -432,13 +435,13 @@ static void process_ep_out_intr(struct dwc2_udc *dev)
while (ep_intr) { if (ep_intr & 0x1) { - ep_intr_status = readl(®->out_endp[ep_num].doepint); + ep_intr_status = readl(®->device_regs.out_endp[ep_num].doepint); debug_cond(DEBUG_OUT_EP != 0, "\tEP%d-OUT : DOEPINT = 0x%x\n", ep_num, ep_intr_status);
/* Interrupt Clear */ - writel(ep_intr_status, ®->out_endp[ep_num].doepint); + writel(ep_intr_status, ®->device_regs.out_endp[ep_num].doepint);
if (ep_num == 0) { if (ep_intr_status & TRANSFER_DONE) { @@ -486,14 +489,14 @@ static int dwc2_udc_irq(int irq, void *_dev)
spin_lock_irqsave(&dev->lock, flags);
- intr_status = readl(®->gintsts); - gintmsk = readl(®->gintmsk); + intr_status = readl(®->global_regs.gintsts); + gintmsk = readl(®->global_regs.gintmsk);
debug_cond(DEBUG_ISR, "\n*** %s : GINTSTS=0x%x(on state %s), GINTMSK : 0x%x," "DAINT : 0x%x, DAINTMSK : 0x%x\n", __func__, intr_status, state_names[dev->ep0state], gintmsk, - readl(®->daint), readl(®->daintmsk)); + readl(®->device_regs.daint), readl(®->device_regs.daintmsk));
if (!intr_status) { spin_unlock_irqrestore(&dev->lock, flags); @@ -503,8 +506,8 @@ static int dwc2_udc_irq(int irq, void *_dev) if (intr_status & INT_ENUMDONE) { debug_cond(DEBUG_ISR, "\tSpeed Detection interrupt\n");
- writel(INT_ENUMDONE, ®->gintsts); - usb_status = (readl(®->dsts) & 0x6); + writel(INT_ENUMDONE, ®->global_regs.gintsts); + usb_status = (readl(®->device_regs.dsts) & 0x6);
if (usb_status & (USB_FULL_30_60MHZ | USB_FULL_48MHZ)) { debug_cond(DEBUG_ISR, @@ -521,14 +524,14 @@ static int dwc2_udc_irq(int irq, void *_dev)
if (intr_status & INT_EARLY_SUSPEND) { debug_cond(DEBUG_ISR, "\tEarly suspend interrupt\n"); - writel(INT_EARLY_SUSPEND, ®->gintsts); + writel(INT_EARLY_SUSPEND, ®->global_regs.gintsts); }
if (intr_status & INT_SUSPEND) { - usb_status = readl(®->dsts); + usb_status = readl(®->device_regs.dsts); debug_cond(DEBUG_ISR, "\tSuspend interrupt :(DSTS):0x%x\n", usb_status); - writel(INT_SUSPEND, ®->gintsts); + writel(INT_SUSPEND, ®->global_regs.gintsts);
if (dev->gadget.speed != USB_SPEED_UNKNOWN && dev->driver) { @@ -538,7 +541,7 @@ static int dwc2_udc_irq(int irq, void *_dev) }
if (intr_status & INT_OTG) { - gotgint = readl(®->gotgint); + gotgint = readl(®->global_regs.gotgint); debug_cond(DEBUG_ISR, "\tOTG interrupt: (GOTGINT):0x%x\n", gotgint);
@@ -551,12 +554,12 @@ static int dwc2_udc_irq(int irq, void *_dev) spin_lock_irqsave(&dev->lock, flags); } } - writel(gotgint, ®->gotgint); + writel(gotgint, ®->global_regs.gotgint); }
if (intr_status & INT_RESUME) { debug_cond(DEBUG_ISR, "\tResume interrupt\n"); - writel(INT_RESUME, ®->gintsts); + writel(INT_RESUME, ®->global_regs.gintsts);
if (dev->gadget.speed != USB_SPEED_UNKNOWN && dev->driver @@ -567,10 +570,10 @@ static int dwc2_udc_irq(int irq, void *_dev) }
if (intr_status & INT_RESET) { - usb_status = readl(®->gotgctl); + usb_status = readl(®->global_regs.gotgctl); debug_cond(DEBUG_ISR, "\tReset interrupt - (GOTGCTL):0x%x\n", usb_status); - writel(INT_RESET, ®->gintsts); + writel(INT_RESET, ®->global_regs.gintsts);
if ((usb_status & 0xc0000) == (0x3 << 18)) { if (reset_available) { @@ -676,14 +679,14 @@ static int dwc2_queue(struct usb_ep *_ep, struct usb_request *_req, req = 0;
} else if (ep_is_in(ep)) { - gintsts = readl(®->gintsts); + gintsts = readl(®->global_regs.gintsts); debug_cond(DEBUG_IN_EP, "%s: ep_is_in, DWC2_UDC_OTG_GINTSTS=0x%x\n", __func__, gintsts);
setdma_tx(ep, req); } else { - gintsts = readl(®->gintsts); + gintsts = readl(®->global_regs.gintsts); debug_cond(DEBUG_OUT_EP != 0, "%s:ep_is_out, DWC2_UDC_OTG_GINTSTS=0x%x\n", __func__, gintsts); @@ -765,14 +768,14 @@ static int dwc2_fifo_read(struct dwc2_ep *ep, void *cp, int max) */ static void udc_set_address(struct dwc2_udc *dev, unsigned char address) { - u32 ctrl = readl(®->dcfg); - writel(DEVICE_ADDRESS(address) | ctrl, ®->dcfg); + u32 ctrl = readl(®->device_regs.dcfg); + writel(DEVICE_ADDRESS(address) | ctrl, ®->device_regs.dcfg);
dwc2_udc_ep0_zlp(dev);
debug_cond(DEBUG_EP0 != 0, "%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n", - __func__, address, readl(®->dcfg)); + __func__, address, readl(®->device_regs.dcfg));
dev->usb_address = address; } @@ -783,7 +786,7 @@ static inline void dwc2_udc_ep0_set_stall(struct dwc2_ep *ep) u32 ep_ctrl = 0;
dev = ep->dev; - ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[EP0_CON].diepctl);
/* set the disable and stall bits */ if (ep_ctrl & DEPCTL_EPENA) @@ -791,11 +794,11 @@ static inline void dwc2_udc_ep0_set_stall(struct dwc2_ep *ep)
ep_ctrl |= DEPCTL_STALL;
- writel(ep_ctrl, ®->in_endp[EP0_CON].diepctl); + writel(ep_ctrl, ®->device_regs.in_endp[EP0_CON].diepctl);
debug_cond(DEBUG_EP0 != 0, "%s: set ep%d stall, DIEPCTL0 = 0x%p\n", - __func__, ep_index(ep), ®->in_endp[EP0_CON].diepctl); + __func__, ep_index(ep), ®->device_regs.in_endp[EP0_CON].diepctl); /* * The application can only set this bit, and the core clears it, * when a SETUP token is received for this endpoint @@ -934,13 +937,13 @@ static int dwc2_udc_get_status(struct dwc2_udc *dev, (unsigned long) usb_ctrl + ROUND(sizeof(g_status), CONFIG_SYS_CACHELINE_SIZE));
- writel(phys_to_bus(usb_ctrl_dma_addr), ®->in_endp[EP0_CON].diepdma); + writel(phys_to_bus(usb_ctrl_dma_addr), ®->device_regs.in_endp[EP0_CON].diepdma); writel(DIEPT_SIZ_PKT_CNT(1) | DIEPT_SIZ_XFER_SIZE(2), - ®->in_endp[EP0_CON].dieptsiz); + ®->device_regs.in_endp[EP0_CON].dieptsiz);
- ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); - writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, - ®->in_endp[EP0_CON].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[EP0_CON].diepctl); + writel(ep_ctrl | DEPCTL_EPENA | DEPCTL_CNAK, + ®->device_regs.in_endp[EP0_CON].diepctl); dev->ep0state = WAIT_FOR_NULL_COMPLETE;
return 0; @@ -955,17 +958,17 @@ static void dwc2_udc_set_nak(struct dwc2_ep *ep) debug("%s: ep_num = %d, ep_type = %d\n", __func__, ep_num, ep->ep_type);
if (ep_is_in(ep)) { - ep_ctrl = readl(®->in_endp[ep_num].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[ep_num].diepctl); ep_ctrl |= DEPCTL_SNAK; - writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + writel(ep_ctrl, ®->device_regs.in_endp[ep_num].diepctl); debug("%s: set NAK, DIEPCTL%d = 0x%x\n", - __func__, ep_num, readl(®->in_endp[ep_num].diepctl)); + __func__, ep_num, readl(®->device_regs.in_endp[ep_num].diepctl)); } else { - ep_ctrl = readl(®->out_endp[ep_num].doepctl); + ep_ctrl = readl(®->device_regs.out_endp[ep_num].doepctl); ep_ctrl |= DEPCTL_SNAK; - writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + writel(ep_ctrl, ®->device_regs.out_endp[ep_num].doepctl); debug("%s: set NAK, DOEPCTL%d = 0x%x\n", - __func__, ep_num, readl(®->out_endp[ep_num].doepctl)); + __func__, ep_num, readl(®->device_regs.out_endp[ep_num].doepctl)); }
return; @@ -980,7 +983,7 @@ static void dwc2_udc_ep_set_stall(struct dwc2_ep *ep) debug("%s: ep_num = %d, ep_type = %d\n", __func__, ep_num, ep->ep_type);
if (ep_is_in(ep)) { - ep_ctrl = readl(®->in_endp[ep_num].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[ep_num].diepctl);
/* set the disable and stall bits */ if (ep_ctrl & DEPCTL_EPENA) @@ -988,19 +991,19 @@ static void dwc2_udc_ep_set_stall(struct dwc2_ep *ep)
ep_ctrl |= DEPCTL_STALL;
- writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + writel(ep_ctrl, ®->device_regs.in_endp[ep_num].diepctl); debug("%s: set stall, DIEPCTL%d = 0x%x\n", - __func__, ep_num, readl(®->in_endp[ep_num].diepctl)); + __func__, ep_num, readl(®->device_regs.in_endp[ep_num].diepctl));
} else { - ep_ctrl = readl(®->out_endp[ep_num].doepctl); + ep_ctrl = readl(®->device_regs.out_endp[ep_num].doepctl);
/* set the stall bit */ ep_ctrl |= DEPCTL_STALL;
- writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + writel(ep_ctrl, ®->device_regs.out_endp[ep_num].doepctl); debug("%s: set stall, DOEPCTL%d = 0x%x\n", - __func__, ep_num, readl(®->out_endp[ep_num].doepctl)); + __func__, ep_num, readl(®->device_regs.out_endp[ep_num].doepctl)); }
return; @@ -1015,7 +1018,7 @@ static void dwc2_udc_ep_clear_stall(struct dwc2_ep *ep) debug("%s: ep_num = %d, ep_type = %d\n", __func__, ep_num, ep->ep_type);
if (ep_is_in(ep)) { - ep_ctrl = readl(®->in_endp[ep_num].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[ep_num].diepctl);
/* clear stall bit */ ep_ctrl &= ~DEPCTL_STALL; @@ -1031,12 +1034,12 @@ static void dwc2_udc_ep_clear_stall(struct dwc2_ep *ep) ep_ctrl |= DEPCTL_SETD0PID; /* DATA0 */ }
- writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + writel(ep_ctrl, ®->device_regs.in_endp[ep_num].diepctl); debug("%s: cleared stall, DIEPCTL%d = 0x%x\n", - __func__, ep_num, readl(®->in_endp[ep_num].diepctl)); + __func__, ep_num, readl(®->device_regs.in_endp[ep_num].diepctl));
} else { - ep_ctrl = readl(®->out_endp[ep_num].doepctl); + ep_ctrl = readl(®->device_regs.out_endp[ep_num].doepctl);
/* clear stall bit */ ep_ctrl &= ~DEPCTL_STALL; @@ -1046,9 +1049,9 @@ static void dwc2_udc_ep_clear_stall(struct dwc2_ep *ep) ep_ctrl |= DEPCTL_SETD0PID; /* DATA0 */ }
- writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + writel(ep_ctrl, ®->device_regs.out_endp[ep_num].doepctl); debug("%s: cleared stall, DOEPCTL%d = 0x%x\n", - __func__, ep_num, readl(®->out_endp[ep_num].doepctl)); + __func__, ep_num, readl(®->device_regs.out_endp[ep_num].doepctl)); }
return; @@ -1110,10 +1113,10 @@ static void dwc2_udc_ep_activate(struct dwc2_ep *ep)
/* Read DEPCTLn register */ if (ep_is_in(ep)) { - ep_ctrl = readl(®->in_endp[ep_num].diepctl); + ep_ctrl = readl(®->device_regs.in_endp[ep_num].diepctl); daintmsk = 1 << ep_num; } else { - ep_ctrl = readl(®->out_endp[ep_num].doepctl); + ep_ctrl = readl(®->device_regs.out_endp[ep_num].doepctl); daintmsk = (1 << ep_num) << DAINT_OUT_BIT; }
@@ -1130,21 +1133,21 @@ static void dwc2_udc_ep_activate(struct dwc2_ep *ep) ep_ctrl |= (DEPCTL_SETD0PID | DEPCTL_USBACTEP | DEPCTL_SNAK);
if (ep_is_in(ep)) { - writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + writel(ep_ctrl, ®->device_regs.in_endp[ep_num].diepctl); debug("%s: USB Ative EP%d, DIEPCTRL%d = 0x%x\n", __func__, ep_num, ep_num, - readl(®->in_endp[ep_num].diepctl)); + readl(®->device_regs.in_endp[ep_num].diepctl)); } else { - writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + writel(ep_ctrl, ®->device_regs.out_endp[ep_num].doepctl); debug("%s: USB Ative EP%d, DOEPCTRL%d = 0x%x\n", __func__, ep_num, ep_num, - readl(®->out_endp[ep_num].doepctl)); + readl(®->device_regs.out_endp[ep_num].doepctl)); } }
/* Unmask EP Interrtupt */ - writel(readl(®->daintmsk)|daintmsk, ®->daintmsk); - debug("%s: DAINTMSK = 0x%x\n", __func__, readl(®->daintmsk)); + writel(readl(®->device_regs.daintmsk) | daintmsk, ®->device_regs.daintmsk); + debug("%s: DAINTMSK = 0x%x\n", __func__, readl(®->device_regs.daintmsk));
}
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index a9dbb85f4e6c5a9122108eb64f77e99758b840e8..b6c8b3d5a6bdf375f1adeb106d4832d92307f0db 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -24,6 +24,7 @@ #include <power/regulator.h> #include <reset.h>
+#include "../common/dwc2_core.h" #include "dwc2.h"
/* Use only HC channel 0. */ @@ -93,7 +94,7 @@ static void init_fslspclksel(struct dwc2_core_regs *regs) #endif
#ifdef DWC2_ULPI_FS_LS - uint32_t hwcfg2 = readl(®s->ghwcfg2); + uint32_t hwcfg2 = readl(®s->global_regs.ghwcfg2); uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> @@ -120,8 +121,8 @@ static void dwc_otg_flush_tx_fifo(struct udevice *dev, int ret;
writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET), - ®s->grstctl); - ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_TXFFLSH, + ®s->global_regs.grstctl); + ret = wait_for_bit_le32(®s->global_regs.grstctl, DWC2_GRSTCTL_TXFFLSH, false, 1000, false); if (ret) dev_info(dev, "%s: Timeout!\n", __func__); @@ -140,8 +141,8 @@ static void dwc_otg_flush_rx_fifo(struct udevice *dev, { int ret;
- writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl); - ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_RXFFLSH, + writel(DWC2_GRSTCTL_RXFFLSH, ®s->global_regs.grstctl); + ret = wait_for_bit_le32(®s->global_regs.grstctl, DWC2_GRSTCTL_RXFFLSH, false, 1000, false); if (ret) dev_info(dev, "%s: Timeout!\n", __func__); @@ -160,14 +161,14 @@ static void dwc_otg_core_reset(struct udevice *dev, int ret;
/* Wait for AHB master IDLE state. */ - ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_AHBIDLE, + ret = wait_for_bit_le32(®s->global_regs.grstctl, DWC2_GRSTCTL_AHBIDLE, true, 1000, false); if (ret) dev_info(dev, "%s: Timeout!\n", __func__);
/* Core Soft Reset */ - writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl); - ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_CSFTRST, + writel(DWC2_GRSTCTL_CSFTRST, ®s->global_regs.grstctl); + ret = wait_for_bit_le32(®s->global_regs.grstctl, DWC2_GRSTCTL_CSFTRST, false, 1000, false); if (ret) dev_info(dev, "%s: Timeout!\n", __func__); @@ -260,16 +261,16 @@ static void dwc_otg_core_host_init(struct udevice *dev,
/* Configure data FIFO sizes */ #ifdef DWC2_ENABLE_DYNAMIC_FIFO - if (readl(®s->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) { + if (readl(®s->global_regs.ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) { /* Rx FIFO */ - writel(DWC2_HOST_RX_FIFO_SIZE, ®s->grxfsiz); + writel(DWC2_HOST_RX_FIFO_SIZE, ®s->global_regs.grxfsiz);
/* Non-periodic Tx FIFO */ nptxfifosize |= DWC2_HOST_NPERIO_TX_FIFO_SIZE << DWC2_FIFOSIZE_DEPTH_OFFSET; nptxfifosize |= DWC2_HOST_RX_FIFO_SIZE << DWC2_FIFOSIZE_STARTADDR_OFFSET; - writel(nptxfifosize, ®s->gnptxfsiz); + writel(nptxfifosize, ®s->global_regs.gnptxfsiz);
/* Periodic Tx FIFO */ ptxfifosize |= DWC2_HOST_PERIO_TX_FIFO_SIZE << @@ -277,45 +278,45 @@ static void dwc_otg_core_host_init(struct udevice *dev, ptxfifosize |= (DWC2_HOST_RX_FIFO_SIZE + DWC2_HOST_NPERIO_TX_FIFO_SIZE) << DWC2_FIFOSIZE_STARTADDR_OFFSET; - writel(ptxfifosize, ®s->hptxfsiz); + writel(ptxfifosize, ®s->global_regs.hptxfsiz); } #endif
/* Clear Host Set HNP Enable in the OTG Control Register */ - clrbits_le32(®s->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN); + clrbits_le32(®s->global_regs.gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
/* Make sure the FIFOs are flushed. */ dwc_otg_flush_tx_fifo(dev, regs, 0x10); /* All Tx FIFOs */ dwc_otg_flush_rx_fifo(dev, regs);
/* Flush out any leftover queued requests. */ - num_channels = readl(®s->ghwcfg2); + num_channels = readl(®s->global_regs.ghwcfg2); num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK; num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET; num_channels += 1;
for (i = 0; i < num_channels; i++) - clrsetbits_le32(®s->hc_regs[i].hcchar, + clrsetbits_le32(®s->host_regs.hc[i].hcchar, DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR, DWC2_HCCHAR_CHDIS);
/* Halt all channels to put them into a known state. */ for (i = 0; i < num_channels; i++) { - clrsetbits_le32(®s->hc_regs[i].hcchar, + clrsetbits_le32(®s->host_regs.hc[i].hcchar, DWC2_HCCHAR_EPDIR, DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS); - ret = wait_for_bit_le32(®s->hc_regs[i].hcchar, + ret = wait_for_bit_le32(®s->host_regs.hc[i].hcchar, DWC2_HCCHAR_CHEN, false, 1000, false); if (ret) dev_info(dev, "%s: Timeout!\n", __func__); }
/* Turn on the vbus power. */ - if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) { - hprt0 = readl(®s->hprt0) & ~DWC2_HPRT0_W1C_MASK; + if (readl(®s->global_regs.gintsts) & DWC2_GINTSTS_CURMODE_HOST) { + hprt0 = readl(®s->host_regs.hprt0) & ~DWC2_HPRT0_W1C_MASK; if (!(hprt0 & DWC2_HPRT0_PRTPWR)) { hprt0 |= DWC2_HPRT0_PRTPWR; - writel(hprt0, ®s->hprt0); + writel(hprt0, ®s->host_regs.hprt0); } }
@@ -338,7 +339,7 @@ static void dwc_otg_core_init(struct udevice *dev) uint8_t brst_sz = DWC2_DMA_BURST_SIZE;
/* Common Initialization */ - usbcfg = readl(®s->gusbcfg); + usbcfg = readl(®s->global_regs.gusbcfg);
/* Program the ULPI External VBUS bit if needed */ if (priv->ext_vbus) { @@ -357,7 +358,7 @@ static void dwc_otg_core_init(struct udevice *dev) #else usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE; #endif - writel(usbcfg, ®s->gusbcfg); + writel(usbcfg, ®s->global_regs.gusbcfg);
/* Reset the Controller */ dwc_otg_core_reset(dev, regs); @@ -369,28 +370,28 @@ static void dwc_otg_core_init(struct udevice *dev) #if defined(DWC2_DFLT_SPEED_FULL) && \ (DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) /* If FS mode with FS PHY */ - setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_PHYSEL); + setbits_le32(®s->global_regs.gusbcfg, DWC2_GUSBCFG_PHYSEL);
/* Reset after a PHY select */ - dwc_otg_core_reset(dev, regs); + dwc2_core_reset(regs);
/* * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. * Also do this on HNP Dev/Host mode switches (done in dev_init * and host_init). */ - if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) + if (readl(®s->global_regs.gintsts) & DWC2_GINTSTS_CURMODE_HOST) init_fslspclksel(regs);
#ifdef DWC2_I2C_ENABLE /* Program GUSBCFG.OtgUtmifsSel to I2C */ - setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL); + setbits_le32(®s->global_regs.gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL);
/* Program GI2CCTL.I2CEn */ - clrsetbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN | + clrsetbits_le32(®s->global_regs.gi2cctl, DWC2_GI2CCTL_I2CEN | DWC2_GI2CCTL_I2CDEVADDR_MASK, 1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET); - setbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN); + setbits_le32(®s->global_regs.gi2cctl, DWC2_GI2CCTL_I2CEN); #endif
#else @@ -416,16 +417,16 @@ static void dwc_otg_core_init(struct udevice *dev) #endif }
- writel(usbcfg, ®s->gusbcfg); + writel(usbcfg, ®s->global_regs.gusbcfg);
/* Reset after setting the PHY parameters */ dwc_otg_core_reset(dev, regs); #endif
- usbcfg = readl(®s->gusbcfg); + usbcfg = readl(®s->global_regs.gusbcfg); usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M); #ifdef DWC2_ULPI_FS_LS - uint32_t hwcfg2 = readl(®s->ghwcfg2); + uint32_t hwcfg2 = readl(®s->global_regs.ghwcfg2); uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> @@ -438,10 +439,10 @@ static void dwc_otg_core_init(struct udevice *dev) if (priv->hnp_srp_disable) usbcfg |= DWC2_GUSBCFG_FORCEHOSTMODE;
- writel(usbcfg, ®s->gusbcfg); + writel(usbcfg, ®s->global_regs.gusbcfg);
/* Program the GAHBCFG Register. */ - switch (readl(®s->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) { + switch (readl(®s->global_regs.ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) { case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY: break; case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA: @@ -464,7 +465,7 @@ static void dwc_otg_core_init(struct udevice *dev) break; }
- writel(ahbcfg, ®s->gahbcfg); + writel(ahbcfg, ®s->global_regs.gahbcfg);
/* Program the capabilities in GUSBCFG Register */ usbcfg = 0; @@ -475,7 +476,7 @@ static void dwc_otg_core_init(struct udevice *dev) usbcfg |= DWC2_GUSBCFG_IC_USB_CAP; #endif
- setbits_le32(®s->gusbcfg, usbcfg); + setbits_le32(®s->global_regs.gusbcfg, usbcfg); }
/* @@ -491,7 +492,7 @@ static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num, struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num, uint8_t ep_is_in, uint8_t ep_type, uint16_t max_packet) { - struct dwc2_hc_regs *hc_regs = ®s->hc_regs[hc_num]; + struct dwc2_hc_regs *hc_regs = ®s->host_regs.hc[hc_num]; uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) | (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) | (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) | @@ -553,7 +554,7 @@ static int dwc_otg_submit_rh_msg_in_status(struct dwc2_core_regs *regs, len = 4; break; case USB_RECIP_OTHER | USB_TYPE_CLASS: - hprt0 = readl(®s->hprt0); + hprt0 = readl(®s->host_regs.hprt0); if (hprt0 & DWC2_HPRT0_PRTCONNSTS) port_status |= USB_PORT_STAT_CONNECTION; if (hprt0 & DWC2_HPRT0_PRTENA) @@ -743,7 +744,8 @@ static int dwc_otg_submit_rh_msg_out(struct dwc2_priv *priv, case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: switch (wValue) { case USB_PORT_FEAT_C_CONNECTION: - clrsetbits_le32(®s->hprt0, DWC2_HPRT0_W1C_MASK, DWC2_HPRT0_PRTCONNDET); + clrsetbits_le32(®s->host_regs.hprt0, DWC2_HPRT0_W1C_MASK, + DWC2_HPRT0_PRTCONNDET); break; } break; @@ -754,13 +756,16 @@ static int dwc_otg_submit_rh_msg_out(struct dwc2_priv *priv, break;
case USB_PORT_FEAT_RESET: - clrsetbits_le32(®s->hprt0, DWC2_HPRT0_W1C_MASK, DWC2_HPRT0_PRTRST); + clrsetbits_le32(®s->host_regs.hprt0, DWC2_HPRT0_W1C_MASK, + DWC2_HPRT0_PRTRST); mdelay(50); - clrbits_le32(®s->hprt0, DWC2_HPRT0_W1C_MASK | DWC2_HPRT0_PRTRST); + clrbits_le32(®s->host_regs.hprt0, + DWC2_HPRT0_W1C_MASK | DWC2_HPRT0_PRTRST); break;
case USB_PORT_FEAT_POWER: - clrsetbits_le32(®s->hprt0, DWC2_HPRT0_W1C_MASK, DWC2_HPRT0_PRTRST); + clrsetbits_le32(®s->host_regs.hprt0, DWC2_HPRT0_W1C_MASK, + DWC2_HPRT0_PRTRST); break;
case USB_PORT_FEAT_ENABLE: @@ -907,7 +912,7 @@ int chunk_msg(struct dwc2_priv *priv, struct usb_device *dev, unsigned long pipe, u8 *pid, int in, void *buffer, int len) { struct dwc2_core_regs *regs = priv->regs; - struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL]; + struct dwc2_hc_regs *hc_regs = ®s->host_regs.hc[DWC2_HC_CHANNEL]; struct dwc2_host_regs *host_regs = ®s->host_regs; int devnum = usb_pipedevice(pipe); int ep = usb_pipeendpoint(pipe); @@ -944,7 +949,8 @@ int chunk_msg(struct dwc2_priv *priv, struct usb_device *dev, if (dev->speed != USB_SPEED_HIGH) { uint8_t hub_addr; uint8_t hub_port; - uint32_t hprt0 = readl(®s->hprt0); + uint32_t hprt0 = readl(®s->host_regs.hprt0); + if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == DWC2_HPRT0_PRTSPD_HIGH) { usb_find_usb2_hub_address_port(dev, &hub_addr, @@ -1174,7 +1180,7 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) if (ret) return ret;
- snpsid = readl(®s->gsnpsid); + snpsid = readl(®s->global_regs.gsnpsid); dev_info(dev, "Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff);
@@ -1200,9 +1206,9 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) dwc_otg_core_host_init(dev, regs); }
- clrsetbits_le32(®s->hprt0, DWC2_HPRT0_W1C_MASK, DWC2_HPRT0_PRTRST); + clrsetbits_le32(®s->host_regs.hprt0, DWC2_HPRT0_W1C_MASK, DWC2_HPRT0_PRTRST); mdelay(50); - clrbits_le32(®s->hprt0, DWC2_HPRT0_W1C_MASK | DWC2_HPRT0_PRTRST); + clrbits_le32(®s->host_regs.hprt0, DWC2_HPRT0_W1C_MASK | DWC2_HPRT0_PRTRST);
for (i = 0; i < MAX_DEVICE; i++) { for (j = 0; j < MAX_ENDPOINT; j++) { @@ -1217,7 +1223,7 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) * is started (the bus is scanned) and fixes the USB detection * problems with some problematic USB keys. */ - if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) + if (readl(®s->global_regs.gintsts) & DWC2_GINTSTS_CURMODE_HOST) mdelay(1000);
printf("USB DWC2\n"); @@ -1228,7 +1234,7 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) static void dwc2_uninit_common(struct dwc2_core_regs *regs) { /* Put everything in reset. */ - clrsetbits_le32(®s->hprt0, DWC2_HPRT0_W1C_MASK, DWC2_HPRT0_PRTRST); + clrsetbits_le32(®s->host_regs.hprt0, DWC2_HPRT0_W1C_MASK, DWC2_HPRT0_PRTRST); }
#if !CONFIG_IS_ENABLED(DM_USB) diff --git a/drivers/usb/host/dwc2.h b/drivers/usb/host/dwc2.h index 6f022e33a19244d65a6b82e210948506c7bc1096..61b544462edfd6778ddf2ddf2dcf6db3f02a3754 100644 --- a/drivers/usb/host/dwc2.h +++ b/drivers/usb/host/dwc2.h @@ -6,64 +6,6 @@ #ifndef __DWC2_H__ #define __DWC2_H__
-struct dwc2_hc_regs { - u32 hcchar; /* 0x00 */ - u32 hcsplt; - u32 hcint; - u32 hcintmsk; - u32 hctsiz; /* 0x10 */ - u32 hcdma; - u32 reserved; - u32 hcdmab; -}; - -struct dwc2_host_regs { - u32 hcfg; /* 0x00 */ - u32 hfir; - u32 hfnum; - u32 _pad_0x40c; - u32 hptxsts; /* 0x10 */ - u32 haint; - u32 haintmsk; - u32 hflbaddr; -}; - -struct dwc2_core_regs { - u32 gotgctl; /* 0x000 */ - u32 gotgint; - u32 gahbcfg; - u32 gusbcfg; - u32 grstctl; /* 0x010 */ - u32 gintsts; - u32 gintmsk; - u32 grxstsr; - u32 grxstsp; /* 0x020 */ - u32 grxfsiz; - u32 gnptxfsiz; - u32 gnptxsts; - u32 gi2cctl; /* 0x030 */ - u32 gpvndctl; - u32 ggpio; - u32 guid; - u32 gsnpsid; /* 0x040 */ - u32 ghwcfg1; - u32 ghwcfg2; - u32 ghwcfg3; - u32 ghwcfg4; /* 0x050 */ - u32 glpmcfg; - u32 _pad_0x58_0x9c[42]; - u32 hptxfsiz; /* 0x100 */ - u32 dptxfsiz_dieptxf[15]; - u32 _pad_0x140_0x3fc[176]; - struct dwc2_host_regs host_regs; /* 0x400 */ - u32 _pad_0x420_0x43c[8]; - u32 hprt0; /* 0x440 */ - u32 _pad_0x444_0x4fc[47]; - struct dwc2_hc_regs hc_regs[16]; /* 0x500 */ - u32 _pad_0x700_0xe00[448]; - u32 pcgcctl; /* 0xe00 */ -}; - #define DWC2_GOTGCTL_SESREQSCS (1 << 0) #define DWC2_GOTGCTL_SESREQSCS_OFFSET 0 #define DWC2_GOTGCTL_SESREQ (1 << 1)