On Thu, Oct 7, 2021 at 10:12 AM Marcel Ziswiler marcel@ziswiler.com wrote:
Hi Tim
On Thu, 2021-10-07 at 08:52 -0700, Tim Harvey wrote:
)On Wed, Oct 6, 2021 at 2:44 PM Marcel Ziswiler marcel@ziswiler.com wrote:
On Wed, 2021-10-06 at 13:17 -0700, Tim Harvey wrote:
Use binman to pack images.
Note that imx8mm_venice supports several boards via multiple DTB's thus in the fit node we must use:
- fit,fdt-list = "of-list"
- fdt-SEQ
- config-SEQ
Signed-off-by: Tim Harvey tharvey@gateworks.com
Reviewed-by: Marcel Ziswiler marcel.ziswiler@toradex.com
v2:
- rebase on origin/mater
You probably meant master (;-p).
Rest look legit.
Marcel,
Thanks for the review. I will submit a v3 as I forgot to include a few other patches required for this that I had in v1 (using a common u-boot.dtsi file)
I am seeing 'WARNING 'u-boot-spl-ddr.bin' not found, resulting binary is not-functional' until I do a 'make' a second time so there is some sort of race condition with the binman blobs.
Yes, remember, this still needs Peng's Makefile fix [1] as otherwise, it may not quite generate all binman artefacts in the right order as discussed here [2].
[1] https://marc.info/?l=u-boot&m=162908373904742 [2] https://marc.info/?l=u-boot&m=162945614207220
Cheers
Marcel
Marvell,
Indeed that patch resolves the issue - thanks for reminding me that hasn't made it in yet!
Best regards,
Tim