Register the OHCI driver into DM by properly initializing the required clocks and pins required by the DT node of OHCI. In order for the VBUS to stay enabled, a `child_pre_probe` method has been added to overcome the DM core disabling it in `usb_scan_device`: when the generic `device_probe` method is called, the pinctrl is processed once again, undoing whatever changes have been made in our driver's probe method.
Signed-off-by: Sergiu Moga sergiu.moga@microchip.com --- drivers/usb/host/ohci-at91.c | 183 +++++++++++++++++++++++++++++++++++ 1 file changed, 183 insertions(+)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 9b955c1bd6..9ae55c6e5d 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -5,6 +5,9 @@ */
#include <common.h> + +#if !(CONFIG_IS_ENABLED(DM_USB)) + #include <asm/arch/clk.h>
int usb_cpu_init(void) @@ -62,3 +65,183 @@ int usb_cpu_init_fail(void) { return usb_cpu_stop(); } + +#elif CONFIG_IS_ENABLED(DM_GPIO) + +#include <clk.h> +#include <dm.h> +#include <asm/gpio.h> +#include <usb.h> +#include "ohci.h" + +#define AT91_MAX_USBH_PORTS 3 + +#define at91_for_each_port(index) \ + for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++) + +struct at91_usbh_data { + enum usb_init_type init_type; + struct gpio_desc vbus_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ +}; + +struct ohci_at91_priv { + struct clk *iclk; + struct clk *fclk; + struct clk *hclk; + bool clocked; +}; + +static void at91_start_clock(struct ohci_at91_priv *ohci_at91) +{ + if (ohci_at91->clocked) + return; + + clk_set_rate(ohci_at91->fclk, 48000000); + clk_prepare_enable(ohci_at91->hclk); + clk_prepare_enable(ohci_at91->iclk); + clk_prepare_enable(ohci_at91->fclk); + ohci_at91->clocked = true; +} + +static void at91_stop_clock(struct ohci_at91_priv *ohci_at91) +{ + if (!ohci_at91->clocked) + return; + + clk_disable_unprepare(ohci_at91->fclk); + clk_disable_unprepare(ohci_at91->iclk); + clk_disable_unprepare(ohci_at91->hclk); + ohci_at91->clocked = false; +} + +static void ohci_at91_set_power(struct at91_usbh_data *pdata, int port, + bool enable) +{ + if (!dm_gpio_is_valid(&pdata->vbus_pin[port])) + return; + + if (enable) + dm_gpio_set_dir_flags(&pdata->vbus_pin[port], + GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + else + dm_gpio_set_dir_flags(&pdata->vbus_pin[port], 0); +} + +static void at91_start_hc(struct udevice *dev) +{ + struct ohci_at91_priv *ohci_at91 = dev_get_priv(dev); + + at91_start_clock(ohci_at91); +} + +static void at91_stop_hc(struct udevice *dev) +{ + struct ohci_at91_priv *ohci_at91 = dev_get_priv(dev); + + at91_stop_clock(ohci_at91); +} + +static int ohci_atmel_deregister(struct udevice *dev) +{ + struct at91_usbh_data *pdata = dev_get_plat(dev); + int i; + + at91_stop_hc(dev); + + at91_for_each_port(i) { + if (i >= pdata->ports) + break; + + ohci_at91_set_power(pdata, i, false); + } + + return ohci_deregister(dev); +} + +static int ohci_atmel_child_pre_probe(struct udevice *dev) +{ + struct udevice *ohci_controller = dev_get_parent(dev); + struct at91_usbh_data *pdata = dev_get_plat(ohci_controller); + int i; + + at91_for_each_port(i) { + if (i >= pdata->ports) + break; + + ohci_at91_set_power(pdata, i, true); + } + + return 0; +} + +static int ohci_atmel_probe(struct udevice *dev) +{ + struct at91_usbh_data *pdata = dev_get_plat(dev); + struct ohci_at91_priv *ohci_at91 = dev_get_priv(dev); + int i; + int ret; + u32 ports; + struct ohci_regs *regs = (struct ohci_regs *)dev_read_addr(dev); + + if (!dev_read_u32(dev, "num-ports", &ports)) + pdata->ports = ports; + + at91_for_each_port(i) { + if (i >= pdata->ports) + break; + + gpio_request_by_name(dev, "atmel,vbus-gpio", i, + &pdata->vbus_pin[i], GPIOD_IS_OUT | + GPIOD_IS_OUT_ACTIVE); + } + + ohci_at91->iclk = devm_clk_get(dev, "ohci_clk"); + if (IS_ERR(ohci_at91->iclk)) { + ret = PTR_ERR(ohci_at91->iclk); + goto fail; + } + + ohci_at91->fclk = devm_clk_get(dev, "uhpck"); + if (IS_ERR(ohci_at91->fclk)) { + ret = PTR_ERR(ohci_at91->fclk); + goto fail; + } + + ohci_at91->hclk = devm_clk_get(dev, "hclk"); + if (IS_ERR(ohci_at91->hclk)) { + ret = PTR_ERR(ohci_at91->hclk); + goto fail; + } + + at91_start_hc(dev); + + return ohci_register(dev, regs); + +fail: + at91_for_each_port(i) + if (dm_gpio_is_valid(&pdata->vbus_pin[i])) + gpio_free(pdata->vbus_pin[i].offset); + + return ret; +} + +static const struct udevice_id ohci_usb_ids[] = { + { .compatible = "atmel,at91rm9200-ohci", }, + { } +}; + +U_BOOT_DRIVER(ohci_atmel) = { + .name = "ohci_atmel", + .id = UCLASS_USB, + .of_match = ohci_usb_ids, + .probe = ohci_atmel_probe, + .remove = ohci_atmel_deregister, + .child_pre_probe = ohci_atmel_child_pre_probe, + .ops = &ohci_usb_ops, + .plat_auto = sizeof(struct at91_usbh_data), + .priv_auto = sizeof(struct ohci_at91_priv), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; + +#endif /* CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(DM_GPIO) */