2015-12-28 18:05 GMT+08:00 Saket Sinha saket.sinha89@gmail.com:
Hi Miao,
Thanks for the patches.
I made an initial attempt to support the fw_cfg in U-boot for QEMU to get acpi tables by fw_cfg for qemu-x86 targets.
The idea was if we find acpi tables in fw_cfg try loading them, otherwise fallback to the builtin acpi tables.
The patch was dropped mainly because ACPI tables loaded by fw_cfg had some issues which I could not figure out. The patches were discussed(me, Simon and Bin) offline(off the mailing list), so I am forwarding it to you and the community.
If we can collaborate the patches in the sense that we are able to load ACPI tables(and other tables) successfully, it would be great.
The main purpose of my patch is: + directly loads kernel from qemu + eliminate the cpu number limits in smp boot
I am not familiar with the acpi part, but if you have a basic configuration to reproduce the error, maybe I can have a try.
Thanks, Miao
Regards, Saket Sinha
On Mon, Dec 28, 2015 at 2:48 PM, Miao Yan yanmiaobest@gmail.com wrote:
The fw_cfg interface provided by QEMU allow guests to retrieve various information about the system, e.g. cpu number, variaous firmware data, kernel setup, etc. The fw_cfg interface can be accessed through 3 IO ports (on x86), using x86 in/out instructions.
- 0x510: select configuration items to access
- 0x511: reading this port will return data selected in 0x510
- 0x514: this can be used to detect if DMA interface is available
If fw_cfg DMA interface is available, it can be used to accelerate accesses.
This patchset adds the following supports for qemu-x86 targets:
the fw_cfg driver itself
add a U-Boot command 'fw' to support direct accessing kernel informtion from fw_cfg interface, this saves the time of loading them from hard disk or network again, through emulated devices.
use fw_cfg to get cpu number at runtime, so smp boot no longer relies on the cpu node hard-coded in dts files.
Miao Yan (7): x86: qemu: add fw_cfg support x86: qemu: add a cpu uclass driver for qemu target x86: fix a typo in function name x86: qemu: use actual CPU number for allocating memory x86: qemu: add qemu_fwcfg_fdt_fixup() x86: qemu: fixup cpu node in device tree qemu-x86: add documentaion for the fw_cfg interface
arch/x86/cpu/mp_init.c | 12 +- arch/x86/cpu/qemu/Makefile | 2 +- arch/x86/cpu/qemu/cpu.c | 58 ++++++++ arch/x86/cpu/qemu/fw_cfg.c | 281 +++++++++++++++++++++++++++++++++++++++ arch/x86/cpu/qemu/fw_cfg.h | 85 ++++++++++++ arch/x86/cpu/qemu/qemu.c | 7 + arch/x86/dts/qemu-x86_i440fx.dts | 18 +-- arch/x86/dts/qemu-x86_q35.dts | 19 +-- doc/README.x86 | 36 ++++- 9 files changed, 473 insertions(+), 45 deletions(-) create mode 100644 arch/x86/cpu/qemu/cpu.c create mode 100644 arch/x86/cpu/qemu/fw_cfg.c create mode 100644 arch/x86/cpu/qemu/fw_cfg.h
-- 1.9.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot