Use generic implementation. It will also reduce config data size for converted boards.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
Changes in v2: None
.../opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.c | 120 +------------- .../opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.h | 80 --------- board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c | 173 +------------------- board/xilinx/zynq/zynq-microzed/ps7_init_gpl.h | 116 -------------- board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c | 177 +------------------- board/xilinx/zynq/zynq-zc702/ps7_init_gpl.h | 116 -------------- board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c | 173 +------------------- board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h | 116 -------------- board/xilinx/zynq/zynq-zed/ps7_init_gpl.c | 173 +------------------- board/xilinx/zynq/zynq-zed/ps7_init_gpl.h | 116 -------------- board/xilinx/zynq/zynq-zybo/ps7_init_gpl.c | 178 +-------------------- board/xilinx/zynq/zynq-zybo/ps7_init_gpl.h | 97 ----------- 12 files changed, 6 insertions(+), 1629 deletions(-) delete mode 100644 board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.h delete mode 100644 board/xilinx/zynq/zynq-microzed/ps7_init_gpl.h delete mode 100644 board/xilinx/zynq/zynq-zc702/ps7_init_gpl.h delete mode 100644 board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h delete mode 100644 board/xilinx/zynq/zynq-zed/ps7_init_gpl.h delete mode 100644 board/xilinx/zynq/zynq-zybo/ps7_init_gpl.h
diff --git a/board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.c b/board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.c index 5aa3951b8017..3bd02f3c83ec 100644 --- a/board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.c +++ b/board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.c @@ -5,8 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ *****************************************************************************/
-#include "ps7_init_gpl.h" -#include "asm/io.h" +#include <asm/arch/ps7_init_gpl.h>
unsigned long ps7_pll_init_data_3_0[] = { EMIT_WRITE(0XF8000008, 0x0000DF0DU), @@ -255,92 +254,11 @@ unsigned long ps7_post_config_3_0[] = { EMIT_EXIT(), };
- unsigned long ps7_reset_apu_3_0[] = { EMIT_MASKWRITE(0xF8000244, 0x00000022U, 0x00000022U), EMIT_EXIT(), };
-#define PS7_MASK_POLL_TIME 100000000 - -static inline void iowrite(unsigned long val, unsigned long addr) -{ - __raw_writel(val, addr); -} - -static inline unsigned long ioread(unsigned long addr) -{ - return __raw_readl(addr); -} - -int ps7_config(unsigned long *ps7_config_init) -{ - unsigned long *ptr = ps7_config_init; - - unsigned long opcode; /* current instruction .. */ - unsigned long args[16]; /* no opcode has so many args ... */ - int numargs; /* number of arguments of this instruction */ - int j; /* general purpose index */ - - unsigned long addr; - unsigned long val, mask; - - int finish = -1; /* loop while this is negative ! */ - int i = 0; /* Timeout variable */ - - while (finish < 0) { - numargs = ptr[0] & 0xF; - opcode = ptr[0] >> 4; - - for (j = 0; j < numargs; j++) - args[j] = ptr[j + 1]; - ptr += numargs + 1; - - switch (opcode) { - case OPCODE_EXIT: - finish = PS7_INIT_SUCCESS; - break; - - case OPCODE_WRITE: - addr = args[0]; - val = args[1]; - iowrite(val, addr); - break; - - case OPCODE_MASKWRITE: - addr = args[0]; - mask = args[1]; - val = args[2]; - iowrite((val & mask) | (ioread(addr) & ~mask) , addr); - break; - - case OPCODE_MASKPOLL: - addr = args[0]; - mask = args[1]; - i = 0; - while (!(ioread(addr) & mask)) { - if (i == PS7_MASK_POLL_TIME) { - finish = PS7_INIT_TIMEOUT; - break; - } - i++; - } - break; - case OPCODE_MASKDELAY: - addr = args[0]; - mask = args[1]; - int delay = get_number_of_cycles_for_delay(mask); - perf_reset_and_start_timer(); - while (ioread(addr) < delay) - ; - break; - default: - finish = PS7_INIT_CORRUPT; - break; - } - } - return finish; -}
int ps7_post_config(void) { @@ -377,39 +295,3 @@ int ps7_init(void) return PS7_INIT_SUCCESS; }
-/* For delay calculation using global timer */ - -/* start timer */ -void perf_start_clock(void) -{ - iowrite((1 << 0) | /* Timer Enable */ - (1 << 3) | /* Auto-increment */ - (0 << 8), /* Pre-scale */ - SCU_GLOBAL_TIMER_CONTROL); -} - -/* stop timer and reset timer count regs */ -void perf_reset_clock(void) -{ - perf_disable_clock(); - iowrite(0, SCU_GLOBAL_TIMER_COUNT_L32); - iowrite(0, SCU_GLOBAL_TIMER_COUNT_U32); -} - -/* Compute mask for given delay in miliseconds*/ -int get_number_of_cycles_for_delay(unsigned int delay) -{ - return APU_FREQ * delay / (2 * 1000); -} - -/* stop timer */ -void perf_disable_clock(void) -{ - iowrite(0, SCU_GLOBAL_TIMER_CONTROL); -} - -void perf_reset_and_start_timer(void) -{ - perf_reset_clock(); - perf_start_clock(); -} diff --git a/board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.h b/board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.h deleted file mode 100644 index cffffa90bbc5..000000000000 --- a/board/opalkelly/zynq/zynq-syzygy-hub/ps7_init_gpl.h +++ /dev/null @@ -1,80 +0,0 @@ -/****************************************************************************** -* -* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. -* -* SPDX-License-Identifier: GPL-2.0+ -*****************************************************************************/ - -#ifdef __cplusplus -extern "C" { -#endif - -#define OPCODE_EXIT 0U -#define OPCODE_CLEAR 1U -#define OPCODE_WRITE 2U -#define OPCODE_MASKWRITE 3U -#define OPCODE_MASKPOLL 4U -#define OPCODE_MASKDELAY 5U - -/* Encode number of arguments in last nibble */ -#define EMIT_EXIT() ((OPCODE_EXIT << 4) | 0) -#define EMIT_WRITE(addr, val) ((OPCODE_WRITE << 4) | 2) , addr, val -#define EMIT_MASKWRITE(addr, mask, val) ((OPCODE_MASKWRITE << 4) | 3) ,\ - addr, mask, val -#define EMIT_MASKPOLL(addr, mask) ((OPCODE_MASKPOLL << 4) | 2) ,\ - addr, mask -#define EMIT_MASKDELAY(addr, mask) ((OPCODE_MASKDELAY << 4) | 2) ,\ - addr, mask - -/* Returns codes of PS7_Init */ -#define PS7_INIT_SUCCESS (0) -#define PS7_INIT_CORRUPT (1) -#define PS7_INIT_TIMEOUT (2) -#define PS7_POLL_FAILED_DDR_INIT (3) -#define PS7_POLL_FAILED_DMA (4) -#define PS7_POLL_FAILED_PLL (5) - -/* Freq of all peripherals */ - -#define APU_FREQ 650000000 -#define DDR_FREQ 525000000 -#define DCI_FREQ 10096154 -#define QSPI_FREQ 200000000 -#define SMC_FREQ 10000000 -#define ENET0_FREQ 125000000 -#define ENET1_FREQ 10000000 -#define USB0_FREQ 60000000 -#define USB1_FREQ 60000000 -#define SDIO_FREQ 100000000 -#define UART_FREQ 100000000 -#define SPI_FREQ 10000000 -#define I2C_FREQ 108333336 -#define WDT_FREQ 108333336 -#define TTC_FREQ 50000000 -#define CAN_FREQ 10000000 -#define PCAP_FREQ 200000000 -#define TPIU_FREQ 200000000 -#define FPGA0_FREQ 50000000 -#define FPGA1_FREQ 10000000 -#define FPGA2_FREQ 10000000 -#define FPGA3_FREQ 10000000 - - -/* For delay calculation using global registers*/ -#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 -#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 -#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 -#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 - -int ps7_config(unsigned long *); -int ps7_init(void); -int ps7_post_config(void); - -void perf_start_clock(void); -void perf_disable_clock(void); -void perf_reset_clock(void); -void perf_reset_and_start_timer(void); -int get_number_of_cycles_for_delay(unsigned int delay); -#ifdef __cplusplus -} -#endif diff --git a/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c b/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c index 58c31b8a50cf..5cf627d2233d 100644 --- a/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c +++ b/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c @@ -14,7 +14,7 @@ * *****************************************************************************/
-#include "ps7_init_gpl.h" +#include <asm/arch/ps7_init_gpl.h>
unsigned long ps7_pll_init_data_3_0[] = { // START: top @@ -12591,139 +12591,6 @@ unsigned long ps7_post_config_1_0[] = {
#include "xil_io.h" -#define PS7_MASK_POLL_TIME 100000000 - -char* -getPS7MessageInfo(unsigned key) { - - char* err_msg = ""; - switch (key) { - case PS7_INIT_SUCCESS: err_msg = "PS7 initialization successful"; break; - case PS7_INIT_CORRUPT: err_msg = "PS7 init Data Corrupted"; break; - case PS7_INIT_TIMEOUT: err_msg = "PS7 init mask poll timeout"; break; - case PS7_POLL_FAILED_DDR_INIT: err_msg = "Mask Poll failed for DDR Init"; break; - case PS7_POLL_FAILED_DMA: err_msg = "Mask Poll failed for PLL Init"; break; - case PS7_POLL_FAILED_PLL: err_msg = "Mask Poll failed for DMA done bit"; break; - default: err_msg = "Undefined error status"; break; - } - - return err_msg; -} - -unsigned long -ps7GetSiliconVersion () { - // Read PS version from MCTRL register [31:28] - unsigned long mask = 0xF0000000; - unsigned long *addr = (unsigned long*) 0XF8007080; - unsigned long ps_version = (*addr & mask) >> 28; - return ps_version; -} - -void mask_write (unsigned long add , unsigned long mask, unsigned long val ) { - unsigned long *addr = (unsigned long*) add; - *addr = ( val & mask ) | ( *addr & ~mask); - //xil_printf("MaskWrite : 0x%x--> 0x%x \n \r" ,add, *addr); -} - - -int mask_poll(unsigned long add , unsigned long mask ) { - volatile unsigned long *addr = (volatile unsigned long*) add; - int i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - return -1; - } - i++; - } - return 1; - //xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr); -} - -unsigned long mask_read(unsigned long add , unsigned long mask ) { - unsigned long *addr = (unsigned long*) add; - unsigned long val = (*addr & mask); - //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val); - return val; -} - - - -int -ps7_config(unsigned long * ps7_config_init) -{ - unsigned long *ptr = ps7_config_init; - - unsigned long opcode; // current instruction .. - unsigned long args[16]; // no opcode has so many args ... - int numargs; // number of arguments of this instruction - int j; // general purpose index - - volatile unsigned long *addr; // some variable to make code readable - unsigned long val,mask; // some variable to make code readable - - int finish = -1 ; // loop while this is negative ! - int i = 0; // Timeout variable - - while( finish < 0 ) { - numargs = ptr[0] & 0xF; - opcode = ptr[0] >> 4; - - for( j = 0 ; j < numargs ; j ++ ) - args[j] = ptr[j+1]; - ptr += numargs + 1; - - - switch ( opcode ) { - - case OPCODE_EXIT: - finish = PS7_INIT_SUCCESS; - break; - - case OPCODE_CLEAR: - addr = (unsigned long*) args[0]; - *addr = 0; - break; - - case OPCODE_WRITE: - addr = (unsigned long*) args[0]; - val = args[1]; - *addr = val; - break; - - case OPCODE_MASKWRITE: - addr = (unsigned long*) args[0]; - mask = args[1]; - val = args[2]; - *addr = ( val & mask ) | ( *addr & ~mask); - break; - - case OPCODE_MASKPOLL: - addr = (unsigned long*) args[0]; - mask = args[1]; - i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - finish = PS7_INIT_TIMEOUT; - break; - } - i++; - } - break; - case OPCODE_MASKDELAY: - addr = (unsigned long*) args[0]; - mask = args[1]; - int delay = get_number_of_cycles_for_delay(mask); - perf_reset_and_start_timer(); - while ((*addr < delay)) { - } - break; - default: - finish = PS7_INIT_CORRUPT; - break; - } - } - return finish; -}
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0; unsigned long *ps7_pll_init_data = ps7_pll_init_data_3_0; @@ -12811,41 +12678,3 @@ ps7_init()
-/* For delay calculation using global timer */ - -/* start timer */ - void perf_start_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = ((1 << 0) | // Timer Enable - (1 << 3) | // Auto-increment - (0 << 8) // Pre-scale - ); -} - -/* stop timer and reset timer count regs */ - void perf_reset_clock(void) -{ - perf_disable_clock(); - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_L32 = 0; - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_U32 = 0; -} - -/* Compute mask for given delay in miliseconds*/ -int get_number_of_cycles_for_delay(unsigned int delay) -{ - // GTC is always clocked at 1/2 of the CPU frequency (CPU_3x2x) - return (APU_FREQ*delay/(2*1000)); - -} - -/* stop timer */ - void perf_disable_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = 0; -} - -void perf_reset_and_start_timer() -{ - perf_reset_clock(); - perf_start_clock(); -} diff --git a/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.h b/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.h deleted file mode 100644 index d775a33d98cb..000000000000 --- a/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.h +++ /dev/null @@ -1,116 +0,0 @@ - -/****************************************************************************** -* -* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. -* -* SPDX-License-Identifier: GPL-2.0+ -* -* -*******************************************************************************/ -/****************************************************************************/ -/** -* -* @file ps7_init.h -* -* This file can be included in FSBL code -* to get prototype of ps7_init() function -* and error codes -* -*****************************************************************************/ - -#ifdef __cplusplus -extern "C" { -#endif - - -//typedef unsigned int u32; - - -/** do we need to make this name more unique ? **/ -//extern u32 ps7_init_data[]; -extern unsigned long * ps7_ddr_init_data; -extern unsigned long * ps7_mio_init_data; -extern unsigned long * ps7_pll_init_data; -extern unsigned long * ps7_clock_init_data; -extern unsigned long * ps7_peripherals_init_data; - - - -#define OPCODE_EXIT 0U -#define OPCODE_CLEAR 1U -#define OPCODE_WRITE 2U -#define OPCODE_MASKWRITE 3U -#define OPCODE_MASKPOLL 4U -#define OPCODE_MASKDELAY 5U -#define NEW_PS7_ERR_CODE 1 - -/* Encode number of arguments in last nibble */ -#define EMIT_EXIT() ( (OPCODE_EXIT << 4 ) | 0 ) -#define EMIT_CLEAR(addr) ( (OPCODE_CLEAR << 4 ) | 1 ) , addr -#define EMIT_WRITE(addr,val) ( (OPCODE_WRITE << 4 ) | 2 ) , addr, val -#define EMIT_MASKWRITE(addr,mask,val) ( (OPCODE_MASKWRITE << 4 ) | 3 ) , addr, mask, val -#define EMIT_MASKPOLL(addr,mask) ( (OPCODE_MASKPOLL << 4 ) | 2 ) , addr, mask -#define EMIT_MASKDELAY(addr,mask) ( (OPCODE_MASKDELAY << 4 ) | 2 ) , addr, mask - -/* Returns codes of PS7_Init */ -#define PS7_INIT_SUCCESS (0) // 0 is success in good old C -#define PS7_INIT_CORRUPT (1) // 1 the data is corrupted, and slcr reg are in corrupted state now -#define PS7_INIT_TIMEOUT (2) // 2 when a poll operation timed out -#define PS7_POLL_FAILED_DDR_INIT (3) // 3 when a poll operation timed out for ddr init -#define PS7_POLL_FAILED_DMA (4) // 4 when a poll operation timed out for dma done bit -#define PS7_POLL_FAILED_PLL (5) // 5 when a poll operation timed out for pll sequence init - - -/* Silicon Versions */ -#define PCW_SILICON_VERSION_1 0 -#define PCW_SILICON_VERSION_2 1 -#define PCW_SILICON_VERSION_3 2 - -/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */ -#define PS7_POST_CONFIG - -/* Freq of all peripherals */ - -#define APU_FREQ 666666687 -#define DDR_FREQ 533333374 -#define DCI_FREQ 10158731 -#define QSPI_FREQ 200000000 -#define SMC_FREQ 10000000 -#define ENET0_FREQ 125000000 -#define ENET1_FREQ 10000000 -#define USB0_FREQ 60000000 -#define USB1_FREQ 60000000 -#define SDIO_FREQ 50000000 -#define UART_FREQ 50000000 -#define SPI_FREQ 10000000 -#define I2C_FREQ 111111115 -#define WDT_FREQ 111111115 -#define TTC_FREQ 50000000 -#define CAN_FREQ 10000000 -#define PCAP_FREQ 200000000 -#define TPIU_FREQ 200000000 -#define FPGA0_FREQ 100000000 -#define FPGA1_FREQ 100000000 -#define FPGA2_FREQ 33333336 -#define FPGA3_FREQ 50000000 - - -/* For delay calculation using global registers*/ -#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 -#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 -#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 -#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 - -int ps7_config( unsigned long*); -int ps7_init(); -int ps7_post_config(); -char* getPS7MessageInfo(unsigned key); - -void perf_start_clock(void); -void perf_disable_clock(void); -void perf_reset_clock(void); -void perf_reset_and_start_timer(); -int get_number_of_cycles_for_delay(unsigned int delay); -#ifdef __cplusplus -} -#endif diff --git a/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c b/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c index 99cf4681f84b..fc325a6b028a 100644 --- a/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c +++ b/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c @@ -14,7 +14,7 @@ * *****************************************************************************/
-#include "ps7_init_gpl.h" +#include <asm/arch/ps7_init_gpl.h>
unsigned long ps7_pll_init_data_3_0[] = { // START: top @@ -12924,139 +12924,6 @@ unsigned long ps7_post_config_1_0[] = {
#include "xil_io.h" -#define PS7_MASK_POLL_TIME 100000000 - -char* -getPS7MessageInfo(unsigned key) { - - char* err_msg = ""; - switch (key) { - case PS7_INIT_SUCCESS: err_msg = "PS7 initialization successful"; break; - case PS7_INIT_CORRUPT: err_msg = "PS7 init Data Corrupted"; break; - case PS7_INIT_TIMEOUT: err_msg = "PS7 init mask poll timeout"; break; - case PS7_POLL_FAILED_DDR_INIT: err_msg = "Mask Poll failed for DDR Init"; break; - case PS7_POLL_FAILED_DMA: err_msg = "Mask Poll failed for PLL Init"; break; - case PS7_POLL_FAILED_PLL: err_msg = "Mask Poll failed for DMA done bit"; break; - default: err_msg = "Undefined error status"; break; - } - - return err_msg; -} - -unsigned long -ps7GetSiliconVersion () { - // Read PS version from MCTRL register [31:28] - unsigned long mask = 0xF0000000; - unsigned long *addr = (unsigned long*) 0XF8007080; - unsigned long ps_version = (*addr & mask) >> 28; - return ps_version; -} - -void mask_write (unsigned long add , unsigned long mask, unsigned long val ) { - unsigned long *addr = (unsigned long*) add; - *addr = ( val & mask ) | ( *addr & ~mask); - //xil_printf("MaskWrite : 0x%x--> 0x%x \n \r" ,add, *addr); -} - - -int mask_poll(unsigned long add , unsigned long mask ) { - volatile unsigned long *addr = (volatile unsigned long*) add; - int i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - return -1; - } - i++; - } - return 1; - //xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr); -} - -unsigned long mask_read(unsigned long add , unsigned long mask ) { - unsigned long *addr = (unsigned long*) add; - unsigned long val = (*addr & mask); - //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val); - return val; -} - - - -int -ps7_config(unsigned long * ps7_config_init) -{ - unsigned long *ptr = ps7_config_init; - - unsigned long opcode; // current instruction .. - unsigned long args[16]; // no opcode has so many args ... - int numargs; // number of arguments of this instruction - int j; // general purpose index - - volatile unsigned long *addr; // some variable to make code readable - unsigned long val,mask; // some variable to make code readable - - int finish = -1 ; // loop while this is negative ! - int i = 0; // Timeout variable - - while( finish < 0 ) { - numargs = ptr[0] & 0xF; - opcode = ptr[0] >> 4; - - for( j = 0 ; j < numargs ; j ++ ) - args[j] = ptr[j+1]; - ptr += numargs + 1; - - - switch ( opcode ) { - - case OPCODE_EXIT: - finish = PS7_INIT_SUCCESS; - break; - - case OPCODE_CLEAR: - addr = (unsigned long*) args[0]; - *addr = 0; - break; - - case OPCODE_WRITE: - addr = (unsigned long*) args[0]; - val = args[1]; - *addr = val; - break; - - case OPCODE_MASKWRITE: - addr = (unsigned long*) args[0]; - mask = args[1]; - val = args[2]; - *addr = ( val & mask ) | ( *addr & ~mask); - break; - - case OPCODE_MASKPOLL: - addr = (unsigned long*) args[0]; - mask = args[1]; - i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - finish = PS7_INIT_TIMEOUT; - break; - } - i++; - } - break; - case OPCODE_MASKDELAY: - addr = (unsigned long*) args[0]; - mask = args[1]; - int delay = get_number_of_cycles_for_delay(mask); - perf_reset_and_start_timer(); - while ((*addr < delay)) { - } - break; - default: - finish = PS7_INIT_CORRUPT; - break; - } - } - return finish; -}
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0; unsigned long *ps7_pll_init_data = ps7_pll_init_data_3_0; @@ -13140,45 +13007,3 @@ ps7_init() //xil_printf ("\n PCW Silicon Version : %d.0", pcw_ver); return PS7_INIT_SUCCESS; } - - - - -/* For delay calculation using global timer */ - -/* start timer */ - void perf_start_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = ((1 << 0) | // Timer Enable - (1 << 3) | // Auto-increment - (0 << 8) // Pre-scale - ); -} - -/* stop timer and reset timer count regs */ - void perf_reset_clock(void) -{ - perf_disable_clock(); - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_L32 = 0; - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_U32 = 0; -} - -/* Compute mask for given delay in miliseconds*/ -int get_number_of_cycles_for_delay(unsigned int delay) -{ - // GTC is always clocked at 1/2 of the CPU frequency (CPU_3x2x) - return (APU_FREQ*delay/(2*1000)); - -} - -/* stop timer */ - void perf_disable_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = 0; -} - -void perf_reset_and_start_timer() -{ - perf_reset_clock(); - perf_start_clock(); -} diff --git a/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.h b/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.h deleted file mode 100644 index beb3b58b0c4d..000000000000 --- a/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.h +++ /dev/null @@ -1,116 +0,0 @@ - -/****************************************************************************** -* -* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. -* -* SPDX-License-Identifier: GPL-2.0+ -* -* -*******************************************************************************/ -/****************************************************************************/ -/** -* -* @file ps7_init.h -* -* This file can be included in FSBL code -* to get prototype of ps7_init() function -* and error codes -* -*****************************************************************************/ - -#ifdef __cplusplus -extern "C" { -#endif - - -//typedef unsigned int u32; - - -/** do we need to make this name more unique ? **/ -//extern u32 ps7_init_data[]; -extern unsigned long * ps7_ddr_init_data; -extern unsigned long * ps7_mio_init_data; -extern unsigned long * ps7_pll_init_data; -extern unsigned long * ps7_clock_init_data; -extern unsigned long * ps7_peripherals_init_data; - - - -#define OPCODE_EXIT 0U -#define OPCODE_CLEAR 1U -#define OPCODE_WRITE 2U -#define OPCODE_MASKWRITE 3U -#define OPCODE_MASKPOLL 4U -#define OPCODE_MASKDELAY 5U -#define NEW_PS7_ERR_CODE 1 - -/* Encode number of arguments in last nibble */ -#define EMIT_EXIT() ( (OPCODE_EXIT << 4 ) | 0 ) -#define EMIT_CLEAR(addr) ( (OPCODE_CLEAR << 4 ) | 1 ) , addr -#define EMIT_WRITE(addr,val) ( (OPCODE_WRITE << 4 ) | 2 ) , addr, val -#define EMIT_MASKWRITE(addr,mask,val) ( (OPCODE_MASKWRITE << 4 ) | 3 ) , addr, mask, val -#define EMIT_MASKPOLL(addr,mask) ( (OPCODE_MASKPOLL << 4 ) | 2 ) , addr, mask -#define EMIT_MASKDELAY(addr,mask) ( (OPCODE_MASKDELAY << 4 ) | 2 ) , addr, mask - -/* Returns codes of PS7_Init */ -#define PS7_INIT_SUCCESS (0) // 0 is success in good old C -#define PS7_INIT_CORRUPT (1) // 1 the data is corrupted, and slcr reg are in corrupted state now -#define PS7_INIT_TIMEOUT (2) // 2 when a poll operation timed out -#define PS7_POLL_FAILED_DDR_INIT (3) // 3 when a poll operation timed out for ddr init -#define PS7_POLL_FAILED_DMA (4) // 4 when a poll operation timed out for dma done bit -#define PS7_POLL_FAILED_PLL (5) // 5 when a poll operation timed out for pll sequence init - - -/* Silicon Versions */ -#define PCW_SILICON_VERSION_1 0 -#define PCW_SILICON_VERSION_2 1 -#define PCW_SILICON_VERSION_3 2 - -/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */ -#define PS7_POST_CONFIG - -/* Freq of all peripherals */ - -#define APU_FREQ 666666687 -#define DDR_FREQ 533333374 -#define DCI_FREQ 10158731 -#define QSPI_FREQ 200000000 -#define SMC_FREQ 10000000 -#define ENET0_FREQ 25000000 -#define ENET1_FREQ 10000000 -#define USB0_FREQ 60000000 -#define USB1_FREQ 60000000 -#define SDIO_FREQ 50000000 -#define UART_FREQ 50000000 -#define SPI_FREQ 10000000 -#define I2C_FREQ 111111115 -#define WDT_FREQ 111111115 -#define TTC_FREQ 50000000 -#define CAN_FREQ 23809523 -#define PCAP_FREQ 200000000 -#define TPIU_FREQ 200000000 -#define FPGA0_FREQ 50000000 -#define FPGA1_FREQ 50000000 -#define FPGA2_FREQ 50000000 -#define FPGA3_FREQ 50000000 - - -/* For delay calculation using global registers*/ -#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 -#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 -#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 -#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 - -int ps7_config( unsigned long*); -int ps7_init(); -int ps7_post_config(); -char* getPS7MessageInfo(unsigned key); - -void perf_start_clock(void); -void perf_disable_clock(void); -void perf_reset_clock(void); -void perf_reset_and_start_timer(); -int get_number_of_cycles_for_delay(unsigned int delay); -#ifdef __cplusplus -} -#endif diff --git a/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c b/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c index c45cc6a6e514..ca5490f0b0e3 100644 --- a/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c +++ b/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c @@ -14,7 +14,7 @@ * *****************************************************************************/
-#include "ps7_init_gpl.h" +#include <asm/arch/ps7_init_gpl.h>
unsigned long ps7_pll_init_data_3_0[] = { // START: top @@ -12831,139 +12831,6 @@ unsigned long ps7_post_config_1_0[] = {
#include "xil_io.h" -#define PS7_MASK_POLL_TIME 100000000 - -char* -getPS7MessageInfo(unsigned key) { - - char* err_msg = ""; - switch (key) { - case PS7_INIT_SUCCESS: err_msg = "PS7 initialization successful"; break; - case PS7_INIT_CORRUPT: err_msg = "PS7 init Data Corrupted"; break; - case PS7_INIT_TIMEOUT: err_msg = "PS7 init mask poll timeout"; break; - case PS7_POLL_FAILED_DDR_INIT: err_msg = "Mask Poll failed for DDR Init"; break; - case PS7_POLL_FAILED_DMA: err_msg = "Mask Poll failed for PLL Init"; break; - case PS7_POLL_FAILED_PLL: err_msg = "Mask Poll failed for DMA done bit"; break; - default: err_msg = "Undefined error status"; break; - } - - return err_msg; -} - -unsigned long -ps7GetSiliconVersion () { - // Read PS version from MCTRL register [31:28] - unsigned long mask = 0xF0000000; - unsigned long *addr = (unsigned long*) 0XF8007080; - unsigned long ps_version = (*addr & mask) >> 28; - return ps_version; -} - -void mask_write (unsigned long add , unsigned long mask, unsigned long val ) { - unsigned long *addr = (unsigned long*) add; - *addr = ( val & mask ) | ( *addr & ~mask); - //xil_printf("MaskWrite : 0x%x--> 0x%x \n \r" ,add, *addr); -} - - -int mask_poll(unsigned long add , unsigned long mask ) { - volatile unsigned long *addr = (volatile unsigned long*) add; - int i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - return -1; - } - i++; - } - return 1; - //xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr); -} - -unsigned long mask_read(unsigned long add , unsigned long mask ) { - unsigned long *addr = (unsigned long*) add; - unsigned long val = (*addr & mask); - //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val); - return val; -} - - - -int -ps7_config(unsigned long * ps7_config_init) -{ - unsigned long *ptr = ps7_config_init; - - unsigned long opcode; // current instruction .. - unsigned long args[16]; // no opcode has so many args ... - int numargs; // number of arguments of this instruction - int j; // general purpose index - - volatile unsigned long *addr; // some variable to make code readable - unsigned long val,mask; // some variable to make code readable - - int finish = -1 ; // loop while this is negative ! - int i = 0; // Timeout variable - - while( finish < 0 ) { - numargs = ptr[0] & 0xF; - opcode = ptr[0] >> 4; - - for( j = 0 ; j < numargs ; j ++ ) - args[j] = ptr[j+1]; - ptr += numargs + 1; - - - switch ( opcode ) { - - case OPCODE_EXIT: - finish = PS7_INIT_SUCCESS; - break; - - case OPCODE_CLEAR: - addr = (unsigned long*) args[0]; - *addr = 0; - break; - - case OPCODE_WRITE: - addr = (unsigned long*) args[0]; - val = args[1]; - *addr = val; - break; - - case OPCODE_MASKWRITE: - addr = (unsigned long*) args[0]; - mask = args[1]; - val = args[2]; - *addr = ( val & mask ) | ( *addr & ~mask); - break; - - case OPCODE_MASKPOLL: - addr = (unsigned long*) args[0]; - mask = args[1]; - i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - finish = PS7_INIT_TIMEOUT; - break; - } - i++; - } - break; - case OPCODE_MASKDELAY: - addr = (unsigned long*) args[0]; - mask = args[1]; - int delay = get_number_of_cycles_for_delay(mask); - perf_reset_and_start_timer(); - while ((*addr < delay)) { - } - break; - default: - finish = PS7_INIT_CORRUPT; - break; - } - } - return finish; -}
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0; unsigned long *ps7_pll_init_data = ps7_pll_init_data_3_0; @@ -13051,41 +12918,3 @@ ps7_init()
-/* For delay calculation using global timer */ - -/* start timer */ - void perf_start_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = ((1 << 0) | // Timer Enable - (1 << 3) | // Auto-increment - (0 << 8) // Pre-scale - ); -} - -/* stop timer and reset timer count regs */ - void perf_reset_clock(void) -{ - perf_disable_clock(); - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_L32 = 0; - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_U32 = 0; -} - -/* Compute mask for given delay in miliseconds*/ -int get_number_of_cycles_for_delay(unsigned int delay) -{ - // GTC is always clocked at 1/2 of the CPU frequency (CPU_3x2x) - return (APU_FREQ*delay/(2*1000)); - -} - -/* stop timer */ - void perf_disable_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = 0; -} - -void perf_reset_and_start_timer() -{ - perf_reset_clock(); - perf_start_clock(); -} diff --git a/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h b/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h deleted file mode 100644 index 694412a1e9d5..000000000000 --- a/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h +++ /dev/null @@ -1,116 +0,0 @@ - -/****************************************************************************** -* -* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. -* -* SPDX-License-Identifier: GPL-2.0+ -* -* -*******************************************************************************/ -/****************************************************************************/ -/** -* -* @file ps7_init.h -* -* This file can be included in FSBL code -* to get prototype of ps7_init() function -* and error codes -* -*****************************************************************************/ - -#ifdef __cplusplus -extern "C" { -#endif - - -//typedef unsigned int u32; - - -/** do we need to make this name more unique ? **/ -//extern u32 ps7_init_data[]; -extern unsigned long * ps7_ddr_init_data; -extern unsigned long * ps7_mio_init_data; -extern unsigned long * ps7_pll_init_data; -extern unsigned long * ps7_clock_init_data; -extern unsigned long * ps7_peripherals_init_data; - - - -#define OPCODE_EXIT 0U -#define OPCODE_CLEAR 1U -#define OPCODE_WRITE 2U -#define OPCODE_MASKWRITE 3U -#define OPCODE_MASKPOLL 4U -#define OPCODE_MASKDELAY 5U -#define NEW_PS7_ERR_CODE 1 - -/* Encode number of arguments in last nibble */ -#define EMIT_EXIT() ( (OPCODE_EXIT << 4 ) | 0 ) -#define EMIT_CLEAR(addr) ( (OPCODE_CLEAR << 4 ) | 1 ) , addr -#define EMIT_WRITE(addr,val) ( (OPCODE_WRITE << 4 ) | 2 ) , addr, val -#define EMIT_MASKWRITE(addr,mask,val) ( (OPCODE_MASKWRITE << 4 ) | 3 ) , addr, mask, val -#define EMIT_MASKPOLL(addr,mask) ( (OPCODE_MASKPOLL << 4 ) | 2 ) , addr, mask -#define EMIT_MASKDELAY(addr,mask) ( (OPCODE_MASKDELAY << 4 ) | 2 ) , addr, mask - -/* Returns codes of PS7_Init */ -#define PS7_INIT_SUCCESS (0) // 0 is success in good old C -#define PS7_INIT_CORRUPT (1) // 1 the data is corrupted, and slcr reg are in corrupted state now -#define PS7_INIT_TIMEOUT (2) // 2 when a poll operation timed out -#define PS7_POLL_FAILED_DDR_INIT (3) // 3 when a poll operation timed out for ddr init -#define PS7_POLL_FAILED_DMA (4) // 4 when a poll operation timed out for dma done bit -#define PS7_POLL_FAILED_PLL (5) // 5 when a poll operation timed out for pll sequence init - - -/* Silicon Versions */ -#define PCW_SILICON_VERSION_1 0 -#define PCW_SILICON_VERSION_2 1 -#define PCW_SILICON_VERSION_3 2 - -/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */ -#define PS7_POST_CONFIG - -/* Freq of all peripherals */ - -#define APU_FREQ 666666687 -#define DDR_FREQ 533333374 -#define DCI_FREQ 10158731 -#define QSPI_FREQ 200000000 -#define SMC_FREQ 10000000 -#define ENET0_FREQ 25000000 -#define ENET1_FREQ 10000000 -#define USB0_FREQ 60000000 -#define USB1_FREQ 60000000 -#define SDIO_FREQ 50000000 -#define UART_FREQ 50000000 -#define SPI_FREQ 10000000 -#define I2C_FREQ 111111115 -#define WDT_FREQ 111111115 -#define TTC_FREQ 50000000 -#define CAN_FREQ 10000000 -#define PCAP_FREQ 200000000 -#define TPIU_FREQ 200000000 -#define FPGA0_FREQ 50000000 -#define FPGA1_FREQ 50000000 -#define FPGA2_FREQ 50000000 -#define FPGA3_FREQ 50000000 - - -/* For delay calculation using global registers*/ -#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 -#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 -#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 -#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 - -int ps7_config( unsigned long*); -int ps7_init(); -int ps7_post_config(); -char* getPS7MessageInfo(unsigned key); - -void perf_start_clock(void); -void perf_disable_clock(void); -void perf_reset_clock(void); -void perf_reset_and_start_timer(); -int get_number_of_cycles_for_delay(unsigned int delay); -#ifdef __cplusplus -} -#endif diff --git a/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c b/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c index 783fd9a30b78..54c803cfa659 100644 --- a/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c +++ b/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c @@ -14,7 +14,7 @@ * *****************************************************************************/
-#include "ps7_init_gpl.h" +#include <asm/arch/ps7_init_gpl.h>
unsigned long ps7_pll_init_data_3_0[] = { // START: top @@ -12489,139 +12489,6 @@ unsigned long ps7_post_config_1_0[] = {
#include "xil_io.h" -#define PS7_MASK_POLL_TIME 100000000 - -char* -getPS7MessageInfo(unsigned key) { - - char* err_msg = ""; - switch (key) { - case PS7_INIT_SUCCESS: err_msg = "PS7 initialization successful"; break; - case PS7_INIT_CORRUPT: err_msg = "PS7 init Data Corrupted"; break; - case PS7_INIT_TIMEOUT: err_msg = "PS7 init mask poll timeout"; break; - case PS7_POLL_FAILED_DDR_INIT: err_msg = "Mask Poll failed for DDR Init"; break; - case PS7_POLL_FAILED_DMA: err_msg = "Mask Poll failed for PLL Init"; break; - case PS7_POLL_FAILED_PLL: err_msg = "Mask Poll failed for DMA done bit"; break; - default: err_msg = "Undefined error status"; break; - } - - return err_msg; -} - -unsigned long -ps7GetSiliconVersion () { - // Read PS version from MCTRL register [31:28] - unsigned long mask = 0xF0000000; - unsigned long *addr = (unsigned long*) 0XF8007080; - unsigned long ps_version = (*addr & mask) >> 28; - return ps_version; -} - -void mask_write (unsigned long add , unsigned long mask, unsigned long val ) { - unsigned long *addr = (unsigned long*) add; - *addr = ( val & mask ) | ( *addr & ~mask); - //xil_printf("MaskWrite : 0x%x--> 0x%x \n \r" ,add, *addr); -} - - -int mask_poll(unsigned long add , unsigned long mask ) { - volatile unsigned long *addr = (volatile unsigned long*) add; - int i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - return -1; - } - i++; - } - return 1; - //xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr); -} - -unsigned long mask_read(unsigned long add , unsigned long mask ) { - unsigned long *addr = (unsigned long*) add; - unsigned long val = (*addr & mask); - //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val); - return val; -} - - - -int -ps7_config(unsigned long * ps7_config_init) -{ - unsigned long *ptr = ps7_config_init; - - unsigned long opcode; // current instruction .. - unsigned long args[16]; // no opcode has so many args ... - int numargs; // number of arguments of this instruction - int j; // general purpose index - - volatile unsigned long *addr; // some variable to make code readable - unsigned long val,mask; // some variable to make code readable - - int finish = -1 ; // loop while this is negative ! - int i = 0; // Timeout variable - - while( finish < 0 ) { - numargs = ptr[0] & 0xF; - opcode = ptr[0] >> 4; - - for( j = 0 ; j < numargs ; j ++ ) - args[j] = ptr[j+1]; - ptr += numargs + 1; - - - switch ( opcode ) { - - case OPCODE_EXIT: - finish = PS7_INIT_SUCCESS; - break; - - case OPCODE_CLEAR: - addr = (unsigned long*) args[0]; - *addr = 0; - break; - - case OPCODE_WRITE: - addr = (unsigned long*) args[0]; - val = args[1]; - *addr = val; - break; - - case OPCODE_MASKWRITE: - addr = (unsigned long*) args[0]; - mask = args[1]; - val = args[2]; - *addr = ( val & mask ) | ( *addr & ~mask); - break; - - case OPCODE_MASKPOLL: - addr = (unsigned long*) args[0]; - mask = args[1]; - i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - finish = PS7_INIT_TIMEOUT; - break; - } - i++; - } - break; - case OPCODE_MASKDELAY: - addr = (unsigned long*) args[0]; - mask = args[1]; - int delay = get_number_of_cycles_for_delay(mask); - perf_reset_and_start_timer(); - while ((*addr < delay)) { - } - break; - default: - finish = PS7_INIT_CORRUPT; - break; - } - } - return finish; -}
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0; unsigned long *ps7_pll_init_data = ps7_pll_init_data_3_0; @@ -12709,41 +12576,3 @@ ps7_init()
-/* For delay calculation using global timer */ - -/* start timer */ - void perf_start_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = ((1 << 0) | // Timer Enable - (1 << 3) | // Auto-increment - (0 << 8) // Pre-scale - ); -} - -/* stop timer and reset timer count regs */ - void perf_reset_clock(void) -{ - perf_disable_clock(); - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_L32 = 0; - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_U32 = 0; -} - -/* Compute mask for given delay in miliseconds*/ -int get_number_of_cycles_for_delay(unsigned int delay) -{ - // GTC is always clocked at 1/2 of the CPU frequency (CPU_3x2x) - return (APU_FREQ*delay/(2*1000)); - -} - -/* stop timer */ - void perf_disable_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = 0; -} - -void perf_reset_and_start_timer() -{ - perf_reset_clock(); - perf_start_clock(); -} diff --git a/board/xilinx/zynq/zynq-zed/ps7_init_gpl.h b/board/xilinx/zynq/zynq-zed/ps7_init_gpl.h deleted file mode 100644 index 6d89863854e2..000000000000 --- a/board/xilinx/zynq/zynq-zed/ps7_init_gpl.h +++ /dev/null @@ -1,116 +0,0 @@ - -/****************************************************************************** -* -* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. -* -* SPDX-License-Identifier: GPL-2.0+ -* -* -*******************************************************************************/ -/****************************************************************************/ -/** -* -* @file ps7_init.h -* -* This file can be included in FSBL code -* to get prototype of ps7_init() function -* and error codes -* -*****************************************************************************/ - -#ifdef __cplusplus -extern "C" { -#endif - - -//typedef unsigned int u32; - - -/** do we need to make this name more unique ? **/ -//extern u32 ps7_init_data[]; -extern unsigned long * ps7_ddr_init_data; -extern unsigned long * ps7_mio_init_data; -extern unsigned long * ps7_pll_init_data; -extern unsigned long * ps7_clock_init_data; -extern unsigned long * ps7_peripherals_init_data; - - - -#define OPCODE_EXIT 0U -#define OPCODE_CLEAR 1U -#define OPCODE_WRITE 2U -#define OPCODE_MASKWRITE 3U -#define OPCODE_MASKPOLL 4U -#define OPCODE_MASKDELAY 5U -#define NEW_PS7_ERR_CODE 1 - -/* Encode number of arguments in last nibble */ -#define EMIT_EXIT() ( (OPCODE_EXIT << 4 ) | 0 ) -#define EMIT_CLEAR(addr) ( (OPCODE_CLEAR << 4 ) | 1 ) , addr -#define EMIT_WRITE(addr,val) ( (OPCODE_WRITE << 4 ) | 2 ) , addr, val -#define EMIT_MASKWRITE(addr,mask,val) ( (OPCODE_MASKWRITE << 4 ) | 3 ) , addr, mask, val -#define EMIT_MASKPOLL(addr,mask) ( (OPCODE_MASKPOLL << 4 ) | 2 ) , addr, mask -#define EMIT_MASKDELAY(addr,mask) ( (OPCODE_MASKDELAY << 4 ) | 2 ) , addr, mask - -/* Returns codes of PS7_Init */ -#define PS7_INIT_SUCCESS (0) // 0 is success in good old C -#define PS7_INIT_CORRUPT (1) // 1 the data is corrupted, and slcr reg are in corrupted state now -#define PS7_INIT_TIMEOUT (2) // 2 when a poll operation timed out -#define PS7_POLL_FAILED_DDR_INIT (3) // 3 when a poll operation timed out for ddr init -#define PS7_POLL_FAILED_DMA (4) // 4 when a poll operation timed out for dma done bit -#define PS7_POLL_FAILED_PLL (5) // 5 when a poll operation timed out for pll sequence init - - -/* Silicon Versions */ -#define PCW_SILICON_VERSION_1 0 -#define PCW_SILICON_VERSION_2 1 -#define PCW_SILICON_VERSION_3 2 - -/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */ -#define PS7_POST_CONFIG - -/* Freq of all peripherals */ - -#define APU_FREQ 666666687 -#define DDR_FREQ 533333374 -#define DCI_FREQ 10158731 -#define QSPI_FREQ 200000000 -#define SMC_FREQ 10000000 -#define ENET0_FREQ 125000000 -#define ENET1_FREQ 10000000 -#define USB0_FREQ 60000000 -#define USB1_FREQ 60000000 -#define SDIO_FREQ 50000000 -#define UART_FREQ 50000000 -#define SPI_FREQ 10000000 -#define I2C_FREQ 111111115 -#define WDT_FREQ 111111115 -#define TTC_FREQ 50000000 -#define CAN_FREQ 10000000 -#define PCAP_FREQ 200000000 -#define TPIU_FREQ 200000000 -#define FPGA0_FREQ 100000000 -#define FPGA1_FREQ 142857132 -#define FPGA2_FREQ 50000000 -#define FPGA3_FREQ 50000000 - - -/* For delay calculation using global registers*/ -#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 -#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 -#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 -#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 - -int ps7_config( unsigned long*); -int ps7_init(); -int ps7_post_config(); -char* getPS7MessageInfo(unsigned key); - -void perf_start_clock(void); -void perf_disable_clock(void); -void perf_reset_clock(void); -void perf_reset_and_start_timer(); -int get_number_of_cycles_for_delay(unsigned int delay); -#ifdef __cplusplus -} -#endif diff --git a/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.c b/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.c index ed7c2a64e128..84625f07462e 100644 --- a/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.c +++ b/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.c @@ -4,7 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */
-#include "ps7_init_gpl.h" +#include <asm/arch/ps7_init_gpl.h>
unsigned long ps7_pll_init_data_3_0[] = { /* START: top */ @@ -12666,145 +12666,6 @@ unsigned long ps7_post_config_1_0[] = {
#include "xil_io.h" -#define PS7_MASK_POLL_TIME 100000000 - -char *getPS7MessageInfo(unsigned key) -{ - char *err_msg = ""; - switch (key) { - case PS7_INIT_SUCCESS: - err_msg = "PS7 initialization successful"; - break; - case PS7_INIT_CORRUPT: - err_msg = "PS7 init Data Corrupted"; - break; - case PS7_INIT_TIMEOUT: - err_msg = "PS7 init mask poll timeout"; - break; - case PS7_POLL_FAILED_DDR_INIT: - err_msg = "Mask Poll failed for DDR Init"; - break; - case PS7_POLL_FAILED_DMA: - err_msg = "Mask Poll failed for PLL Init"; - break; - case PS7_POLL_FAILED_PLL: - err_msg = "Mask Poll failed for DMA done bit"; - break; - default: - err_msg = "Undefined error status"; - break; - } - - return err_msg; -} - -unsigned long ps7GetSiliconVersion(void) -{ - /* Read PS version from MCTRL register [31:28] */ - unsigned long mask = 0xF0000000; - unsigned long *addr = (unsigned long *)0XF8007080; - unsigned long ps_version = (*addr & mask) >> 28; - return ps_version; -} - -void mask_write(unsigned long add, unsigned long mask, unsigned long val) -{ - unsigned long *addr = (unsigned long *)add; - *addr = (val & mask) | (*addr & ~mask); -} - -int mask_poll(unsigned long add, unsigned long mask) -{ - volatile unsigned long *addr = (volatile unsigned long *)add; - int i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) - return -1; - i++; - } - return 1; -} - -unsigned long mask_read(unsigned long add, unsigned long mask) -{ - unsigned long *addr = (unsigned long *)add; - unsigned long val = (*addr & mask); - return val; -} - -int ps7_config(unsigned long *ps7_config_init) -{ - unsigned long *ptr = ps7_config_init; - - unsigned long opcode; /* current instruction .. */ - unsigned long args[16]; /* no opcode has so many args ... */ - int numargs; /* number of arguments of this instruction */ - int j; /* general purpose index */ - - volatile unsigned long *addr; /* some variable to make code readable */ - unsigned long val, mask; /* some variable to make code readable */ - - int finish = -1; /* loop while this is negative ! */ - int i = 0; /* Timeout variable */ - - while (finish < 0) { - numargs = ptr[0] & 0xF; - opcode = ptr[0] >> 4; - - for (j = 0; j < numargs; j++) - args[j] = ptr[j + 1]; - ptr += numargs + 1; - - switch (opcode) { - case OPCODE_EXIT: - finish = PS7_INIT_SUCCESS; - break; - - case OPCODE_CLEAR: - addr = (unsigned long *)args[0]; - *addr = 0; - break; - - case OPCODE_WRITE: - addr = (unsigned long *)args[0]; - val = args[1]; - *addr = val; - break; - - case OPCODE_MASKWRITE: - addr = (unsigned long *)args[0]; - mask = args[1]; - val = args[2]; - *addr = (val & mask) | (*addr & ~mask); - break; - - case OPCODE_MASKPOLL: - addr = (unsigned long *)args[0]; - mask = args[1]; - i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - finish = PS7_INIT_TIMEOUT; - break; - } - i++; - } - break; - case OPCODE_MASKDELAY: - addr = (unsigned long *)args[0]; - mask = args[1]; - int delay = get_number_of_cycles_for_delay(mask); - perf_reset_and_start_timer(); - while ((*addr < delay)) - ; - break; - default: - finish = PS7_INIT_CORRUPT; - break; - } - } - return finish; -}
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0; unsigned long *ps7_pll_init_data = ps7_pll_init_data_3_0; @@ -12892,40 +12753,3 @@ int ps7_init(void) return PS7_INIT_SUCCESS; }
-/* For delay calculation using global timer */ - -/* start timer */ -void perf_start_clock(void) -{ - *(volatile unsigned int *)SCU_GLOBAL_TIMER_CONTROL = ((1 << 0) | /* Timer Enable */ - (1 << 3) | /* Auto-increment */ - (0 << 8) /* Pre-scale */ - ); -} - -/* stop timer and reset timer count regs */ -void perf_reset_clock(void) -{ - perf_disable_clock(); - *(volatile unsigned int *)SCU_GLOBAL_TIMER_COUNT_L32 = 0; - *(volatile unsigned int *)SCU_GLOBAL_TIMER_COUNT_U32 = 0; -} - -/* Compute mask for given delay in miliseconds*/ -int get_number_of_cycles_for_delay(unsigned int delay) -{ - /* GTC is always clocked at 1/2 of the CPU frequency (CPU_3x2x) */ - return APU_FREQ * delay / (2 * 1000); -} - -/* stop timer */ -void perf_disable_clock(void) -{ - *(volatile unsigned int *)SCU_GLOBAL_TIMER_CONTROL = 0; -} - -void perf_reset_and_start_timer(void) -{ - perf_reset_clock(); - perf_start_clock(); -} diff --git a/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.h b/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.h deleted file mode 100644 index 929251afc5f2..000000000000 --- a/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Copyright (c) Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifdef __cplusplus -extern "C" { -#endif - -/*typedef unsigned int u32; */ - -/** do we need to make this name more unique ? **/ -/*extern u32 ps7_init_data[]; */ -extern unsigned long *ps7_ddr_init_data; -extern unsigned long *ps7_mio_init_data; -extern unsigned long *ps7_pll_init_data; -extern unsigned long *ps7_clock_init_data; -extern unsigned long *ps7_peripherals_init_data; - -#define OPCODE_EXIT 0U -#define OPCODE_CLEAR 1U -#define OPCODE_WRITE 2U -#define OPCODE_MASKWRITE 3U -#define OPCODE_MASKPOLL 4U -#define OPCODE_MASKDELAY 5U -#define NEW_PS7_ERR_CODE 1 - -/* Encode number of arguments in last nibble */ -#define EMIT_EXIT() ((OPCODE_EXIT << 4) | 0) -#define EMIT_CLEAR(addr) ((OPCODE_CLEAR << 4) | 1) , addr -#define EMIT_WRITE(addr, val) ((OPCODE_WRITE << 4) | 2) , addr, val -#define EMIT_MASKWRITE(addr, mask, val) ((OPCODE_MASKWRITE << 4) | 3) , addr, mask, val -#define EMIT_MASKPOLL(addr, mask) ((OPCODE_MASKPOLL << 4) | 2) , addr, mask -#define EMIT_MASKDELAY(addr, mask) ((OPCODE_MASKDELAY << 4) | 2) , addr, mask - -/* Returns codes of PS7_Init */ -#define PS7_INIT_SUCCESS (0) /* 0 is success in good old C */ -#define PS7_INIT_CORRUPT (1) /* 1 the data is corrupted, and slcr reg are in corrupted state now */ -#define PS7_INIT_TIMEOUT (2) /* 2 when a poll operation timed out */ -#define PS7_POLL_FAILED_DDR_INIT (3) /* 3 when a poll operation timed out for ddr init */ -#define PS7_POLL_FAILED_DMA (4) /* 4 when a poll operation timed out for dma done bit */ -#define PS7_POLL_FAILED_PLL (5) /* 5 when a poll operation timed out for pll sequence init */ - -/* Silicon Versions */ -#define PCW_SILICON_VERSION_1 0 -#define PCW_SILICON_VERSION_2 1 -#define PCW_SILICON_VERSION_3 2 - -/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */ -#define PS7_POST_CONFIG - -/* Freq of all peripherals */ - -#define APU_FREQ 650000000 -#define DDR_FREQ 525000000 -#define DCI_FREQ 10096154 -#define QSPI_FREQ 200000000 -#define SMC_FREQ 10000000 -#define ENET0_FREQ 125000000 -#define ENET1_FREQ 10000000 -#define USB0_FREQ 60000000 -#define USB1_FREQ 60000000 -#define SDIO_FREQ 50000000 -#define UART_FREQ 100000000 -#define SPI_FREQ 10000000 -#define I2C_FREQ 108333336 -#define WDT_FREQ 108333336 -#define TTC_FREQ 50000000 -#define CAN_FREQ 10000000 -#define PCAP_FREQ 200000000 -#define TPIU_FREQ 200000000 -#define FPGA0_FREQ 100000000 -#define FPGA1_FREQ 142857132 -#define FPGA2_FREQ 200000000 -#define FPGA3_FREQ 50000000 - - -/* For delay calculation using global registers*/ -#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 -#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 -#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 -#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 - -int ps7_config(unsigned long *); -int ps7_init(void); -int ps7_post_config(void); -char *getPS7MessageInfo(unsigned key); - -void perf_start_clock(void); -void perf_disable_clock(void); -void perf_reset_clock(void); -void perf_reset_and_start_timer(void); -int get_number_of_cycles_for_delay(unsigned int delay); -#ifdef __cplusplus -} -#endif