On Tuesday 26 May 2009 09:28:29 Prafulla Wadaskar wrote:
Do you also have a NAND driver for Kirkwood in your queue? I'm asking since I need NAND support for my custom board. If you don't have any I will port the one from the 1.1.4 Marvell version to mainline.
Hi Stefan No need, NAND support is already mainlined in u-boot, you just need to use it I have used it for Sheevaplug board support please see the patch http://lists.denx.de/pipermail/u-boot/2009-May/053158.html
I know that NAND support is generally available in U-Boot. But what's currently missing is the platform/board specific driver for Kirkwood. Seems that you included the Kirkwood NAND driver into your Sheevaplug support patch. Good. But this driver should be placed in drivers/mtd/nand so that other Kirkwood boards can use it as well.
So could you please split this Sheevaplug patch and submit the NAND driver in a separate patch (CC to Scott Wood as NAND custodian)?
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================