I found fw_setenv / fw_printenv, however fw_setenv does not seem to work properly on the Gumstix. I have about the same problem as this person:
http://lists.denx.de/pipermail/u-boot/2007-July/022640.html
Where fw_printenv works fine, but fw_setenv produces:
nand_write: Attempt to write not page aligned data
And corrupts the environment block.
I found this guy who did some research:
http://gumstix.8.n6.nabble.com/u-boot-fw-saveenv-doesn-t-work-td638302.html
And says he traced the problem down an unaligned write of the 2-byte CRC. There is no easy fix posted there though, presuming that's the problem.
Any ideas?
Thanks, Jason
On Wed, Apr 3, 2013 at 2:36 PM, Jason Cipriani jason.cipriani@gmail.comwrote:
Hi all,
I have about 50 Gumstix Overos, each running uboot and:
root@overo:~# uname -a Linux overo 3.2.28-rt42+ #6 PREEMPT RT Fri Sep 21 12:23:39 EDT 2012 armv7l GNU/Linux
I'm trying to automate installing our software on each one, but this includes setting and saving one uboot environment variable (which is stored on the Gumstix NAND):
# setenv dvimode="1024x768MC-24@60" # saveenv
Our current deployment process will be, for each of the 50 Gumstix:
- Clone SD card from image, using a PC
- Copy device-unique configuration files to SD image
- SD card into Gumstix
- Boot Gumstix, interrupt uboot
- Set and save uboot environment variables
Steps 1, 2, and 3 are automated in a script. I'd really like to get rid of steps 4 and 5, which currently are going to be a significant part of deployment time.
My question is: Is there any way to set and save a uboot environment variable from the Linux OS? If so, what I would do is make a startup script that runs once which sets up uboot then reboots, and that way our deployment script can just copy it to the SD card and the first time we boot each Gumstix it will automatically configure the uboot environment.
Thanks! Jason