Dear Fabio Estevam,
From: Fabio Estevam fabio.estevam@freescale.com
mx28evk has a LAN8270 ethernet phy and we can use the phylib framework.
One of the advantages of converting to phylib is that we no longer see a timeout prior to the first transfer in the 'tftp' command.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
After applying this patch I get:
U-Boot 2013.04-11810-gd6d75ec-dirty (Jul 12 2013 - 01:15:03)
CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SD/MMC #0, 3V3 DRAM: 128 MiB MMC: MXS MMC: 0 Video: MXSFB: 'videomode' variable not set! In: serial Out: serial Err: serial Net: Phy not found
I still get this 'Phy not found' message, but I think this is not related to the board code.
This is because PHYlib doesn't know your PHY. You might need to add a definition for it into drivers/net/phy/smsc.c
board/freescale/mx28evk/mx28evk.c | 15 +-------------- include/configs/mx28evk.h | 3 ++- 2 files changed, 3 insertions(+), 15 deletions(-)
diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 4edd9f4..cd81d58 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -110,7 +110,6 @@ int board_eth_init(bd_t *bis) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
struct eth_device *dev; int ret;
ret = cpu_eth_init(bis);
@@ -133,24 +132,12 @@ int board_eth_init(bd_t *bis) return ret; }
- ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
- ret = fecmxc_initialize_multi(bis, 1, 1, MXS_ENET1_BASE);
Are you sure the PHY address on the MII bus for FEC1 is 0x01 ?
[..]
Best regards, Marek Vasut