On Wed, 06 Jun 2007 11:36:03 -0500
Jon Loeliger wrote:

> On Wed, 2007-06-06 at 11:22, Timur Tabi wrote:
> > Dylandrea Young wrote:
> > > Hello, all,
> > >
> > > I am going to port U-boot to a Freescale MPC5121e based board. The
> > > MPC5121e uses the e300 CPU core based on the PowerPC instruction set. I
> > > checked u-boot cpu directory and found there are bunch of cpu specific
> > > subdirectories. Anyone happens to know that one of the subdirectory is
> > > suit for e300 CPU? If there is no any existing cpu directory for e300
> > > CPU core, I guess I have to create a new cpu directory and write
> > > associate cpu specific files.
> >
> > cpu/mpc83xx is for the 83xx SOCs, all of which have an e300 core.
>
> And new board ports should be placed under
>
> boards/freescale
>
> now too!
>
Does this apply only to boards manufactured by Freescale, or all
Freescale part based boards (the poster didn't specify which in this
case). I thought it was the former.

Kim