From: Dirk Behme dirk.behme@googlemail.com
Using mkimage with e.g.
tools/mkimage -A arm -T firmware -O u-boot -d u-boot.bin foo.img
gives a warning
"Unknown OMAP image type - 5"
while it seems that the image itself is created successfully.
This does come from the patch "mkimage: Add OMAP boot image support".
Reordering the init_xx_image_type() sequence does make this message go away.
Signed-off-by: Dirk Behme dirk.behme@googlemail.com CC: John Rigby john.rigby@linaro.org CC: Aneesh V aneesh@ti.com CC: Sandeep Paulraj s-paulraj@ti.com
---
This is reproducable with the recent mainline mkimage where the patch "mkimage: Add OMAP boot image support" is applied:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=3decb14abe76d2...
tools/mkimage.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Index: u-boot.git/tools/mkimage.c =================================================================== --- u-boot.git.orig/tools/mkimage.c +++ u-boot.git/tools/mkimage.c @@ -156,12 +156,12 @@ main (int argc, char **argv) init_imx_image_type (); /* Init FIT image generation/list support */ init_fit_image_type (); - /* Init TI OMAP Boot image generation/list support */ - init_omap_image_type(); /* Init Default image generation/list support */ init_default_image_type (); /* Init Davinci UBL support */ init_ubl_image_type(); + /* Init TI OMAP Boot image generation/list support */ + init_omap_image_type();
params.cmdname = *argv; params.addr = params.ep = 0;