Hi Fabio, Stefano,
This patch series provides code to perform read leveling - RDLVL, which is adjusting the DQS strobe in relation to the DQ signals so that the strobe edge is centered in the window of valid read data.
The code is based on Vybrid's Reference Manual's: "VFxxx Controller Reference Manual, Rev. 0, 10/2016", page 1600, 10.1.6.16.4.1 "Software Read Leveling in MC Evaluation Mode"
and uses clarification provided by following NXP's community thread: "Vybrid: About DDR leveling feature on DDRMC." https://community.nxp.com/thread/395323
It depends on a BITMAP rework patch: usb: composite: Move bitmap related operations to ./include/linux/bitmap.h http://patchwork.ozlabs.org/patch/1006448/
The above patch has found its way to main line, so there is no obstacles to pull this code.
Moreover, some Stefan's patches: [U-Boot,v1,0/4] ddr: vybrid: various fixes
http://patchwork.ozlabs.org/cover/1007547/
Are also related to DDR_MC setup on Vybrid and fix/cleanup some issues.
Changes in v2:
- CR93_SWLVL_EXIT -> CR94_SWLVL_EXIT (EXIT is in CR94)
- Add more defines to imx-regs.h (moved from *-calibration.h)
- CR93_SWLVL_EXIT -> CR94_SWLVL_EXIT (EXIT is in CR94)
- Update Kconfig information regarding DDRMC_VF610_CALIBRATION
- Update ddrmc-vf610-calibration. comment
- Update code after extending imx-regs.h
- Remove not needed #ifdef
Lukasz Majewski (3): ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) ddr: vybrid: Provide code to perform on-boot calibration ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
arch/arm/include/asm/arch-vf610/imx-regs.h | 14 +- arch/arm/mach-imx/Kconfig | 12 + arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/ddrmc-vf610-calibration.c | 342 ++++++++++++++++++++++++++++ arch/arm/mach-imx/ddrmc-vf610-calibration.h | 45 ++++ arch/arm/mach-imx/ddrmc-vf610.c | 5 + 6 files changed, 418 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-imx/ddrmc-vf610-calibration.c create mode 100644 arch/arm/mach-imx/ddrmc-vf610-calibration.h
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de