With some recent changes to relevant drivers here the openrd board (openrd_client in this case) does not fit within its size constraint. We can however drop the slightly extended baudrate table and then the duplication of mtdparts/mtdids in the default environment. These defaults are set in the environment by the 'mtdparts' command and otherwise referenced throughout the code.
Signed-off-by: Tom Rini trini@konsulko.com --- include/configs/mv-common.h | 8 -------- include/configs/openrd.h | 4 +--- 2 files changed, 1 insertion(+), 11 deletions(-)
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 79d61c599e54..8ae521f7e986 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -38,14 +38,6 @@ #define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif
-/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200,230400, 460800, 921600 } /* auto boot */ #define CONFIG_PREBOOT
diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 2b21003b8b75..17611bc56873 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -60,9 +60,7 @@ CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ - "mtdids="CONFIG_MTDIDS_DEFAULT"\0" \ - "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" + "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
/* * Ethernet Driver configuration