Hi Jaehoon,
On 10/10/2016 07:01 AM, Jaehoon Chung wrote:
On 10/07/2016 06:23 PM, Kever Yang wrote:
Init the clock rate to CONFIG_ROCKCHIP_SDHCI_MAX_FREQ with clock driver api.
Signed-off-by: Kever Yang kever.yang@rock-chips.com
drivers/mmc/rockchip_sdhci.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index c56e1a3..e787343 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -12,6 +12,7 @@ #include <libfdt.h> #include <malloc.h> #include <sdhci.h> +#include <clk.h>
/* 400KHz is max freq for card ID etc. Use that as min */ #define EMMC_MIN_FREQ 400000 @@ -33,7 +34,10 @@ static int arasan_sdhci_probe(struct udevice *dev) struct rockchip_sdhc *prv = dev_get_priv(dev); struct sdhci_host *host = &prv->host; int ret;
struct clk clk;
ret = clk_get_by_index(dev, 0, &clk);
What purpose do you use "ret" value?
Forgot to do the error check with 'ret', will add it at V2.
Thanks, - Kever
Best Regards, Jaehoon Chung
clk_set_rate(&clk, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ); host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ,