Allocate struct phy in private structure instead of allocating locally and assign it to a pointer. This eventually fix miss alignment phy which is used in another functions.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v2: - none
drivers/usb/musb-new/sunxi.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index b846afb094..aa2880eeb9 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -87,7 +87,7 @@ struct sunxi_glue { struct sunxi_ccm_reg *ccm; struct sunxi_musb_config *cfg; struct device dev; - struct phy *phy; + struct phy phy; }; #define to_sunxi_glue(d) container_of(d, struct sunxi_glue, dev)
@@ -235,19 +235,19 @@ static int sunxi_musb_enable(struct musb *musb) musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
if (is_host_enabled(musb)) { - ret = sun4i_usb_phy_vbus_detect(glue->phy); + ret = sun4i_usb_phy_vbus_detect(&glue->phy); if (ret == 1) { printf("A charger is plugged into the OTG: "); return -ENODEV; }
- ret = sun4i_usb_phy_id_detect(glue->phy); + ret = sun4i_usb_phy_id_detect(&glue->phy); if (ret == 1) { printf("No host cable detected: "); return -ENODEV; }
- ret = generic_phy_power_on(glue->phy); + ret = generic_phy_power_on(&glue->phy); if (ret) { pr_err("failed to power on USB PHY\n"); return ret; @@ -271,7 +271,7 @@ static void sunxi_musb_disable(struct musb *musb) return;
if (is_host_enabled(musb)) { - ret = generic_phy_power_off(glue->phy); + ret = generic_phy_power_off(&glue->phy); if (ret) { pr_err("failed to power off USB PHY\n"); return; @@ -291,7 +291,7 @@ static int sunxi_musb_init(struct musb *musb)
pr_debug("%s():\n", __func__);
- ret = generic_phy_init(glue->phy); + ret = generic_phy_init(&glue->phy); if (ret) { pr_err("failed to init USB PHY\n"); return ret; @@ -330,14 +330,14 @@ static void sunxi_musb_pre_root_reset_end(struct musb *musb) { struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
- sun4i_usb_phy_set_squelch_detect(glue->phy, false); + sun4i_usb_phy_set_squelch_detect(&glue->phy, false); }
static void sunxi_musb_post_root_reset_end(struct musb *musb) { struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
- sun4i_usb_phy_set_squelch_detect(glue->phy, true); + sun4i_usb_phy_set_squelch_detect(&glue->phy, true); }
static const struct musb_platform_ops sunxi_musb_ops = { @@ -405,7 +405,6 @@ static int musb_usb_probe(struct udevice *dev) struct usb_bus_priv *priv = dev_get_uclass_priv(dev); struct musb_hdrc_platform_data pdata; void *base = dev_read_addr_ptr(dev); - struct phy phy; int ret;
if (!base) @@ -419,13 +418,12 @@ static int musb_usb_probe(struct udevice *dev) if (IS_ERR(glue->ccm)) return PTR_ERR(glue->ccm);
- ret = generic_phy_get_by_name(dev, "usb", &phy); + ret = generic_phy_get_by_name(dev, "usb", &glue->phy); if (ret) { pr_err("failed to get usb PHY\n"); return ret; }
- glue->phy = &phy; priv->desc_before_addr = true;
memset(&pdata, 0, sizeof(pdata)); @@ -460,8 +458,8 @@ static int musb_usb_remove(struct udevice *dev) struct musb_host_data *host = &glue->mdata; int ret;
- if (generic_phy_valid(glue->phy)) { - ret = generic_phy_exit(glue->phy); + if (generic_phy_valid(&glue->phy)) { + ret = generic_phy_exit(&glue->phy); if (ret) { pr_err("failed to exit %s USB PHY\n", dev->name); return ret;