Add initial support of STM32MP13 family based on v5.18-rc2
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com ---
(no changes since v1)
arch/arm/dts/stm32mp13-pinctrl.dtsi | 123 ++++++++++ arch/arm/dts/stm32mp131.dtsi | 358 ++++++++++++++++++++++++++++ arch/arm/dts/stm32mp133.dtsi | 37 +++ arch/arm/dts/stm32mp135.dtsi | 12 + arch/arm/dts/stm32mp135f-dk.dts | 57 +++++ arch/arm/dts/stm32mp13xc.dtsi | 17 ++ arch/arm/dts/stm32mp13xf.dtsi | 17 ++ board/st/stm32mp1/MAINTAINERS | 1 + 8 files changed, 622 insertions(+) create mode 100644 arch/arm/dts/stm32mp13-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp131.dtsi create mode 100644 arch/arm/dts/stm32mp133.dtsi create mode 100644 arch/arm/dts/stm32mp135.dtsi create mode 100644 arch/arm/dts/stm32mp135f-dk.dts create mode 100644 arch/arm/dts/stm32mp13xc.dtsi create mode 100644 arch/arm/dts/stm32mp13xf.dtsi
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi new file mode 100644 index 0000000000..d2472cd8f1 --- /dev/null +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@foss.st.com + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_clk_pins_a: sdmmc1-clk-0 { + pins { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_clk_pins_a: sdmmc2-clk-0 { + pins { + pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi new file mode 100644 index 0000000000..950e172e45 --- /dev/null +++ b/arch/arm/dts/stm32mp131.dtsi @@ -0,0 +1,358 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@foss.st.com for STMicroelectronics. + */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + clocks { + clk_axi: clk-axi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <266500000>; + }; + + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_hsi: clk-hsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_pclk3: clk-pclk3 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104438965>; + }; + + clk_pclk4: clk-pclk4 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <133250000>; + }; + + clk_pll4_p: clk-pll4_p { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + clk_pll4_r: clk-pll4_r { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <99000000>; + }; + }; + + intc: interrupt-controller@a0021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xa0021000 0x1000>, + <0xa0022000 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + always-on; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_hsi>; + status = "disabled"; + }; + + dma1: dma-controller@48000000 { + compatible = "st,stm32-dma"; + reg = <0x48000000 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_pclk4>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + }; + + dma2: dma-controller@48001000 { + compatible = "st,stm32-dma"; + reg = <0x48001000 0x400>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_pclk4>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + }; + + dmamux1: dma-router@48002000 { + compatible = "st,stm32h7-dmamux"; + reg = <0x48002000 0x40>; + clocks = <&clk_pclk4>; + #dma-cells = <3>; + dma-masters = <&dma1 &dma2>; + dma-requests = <128>; + dma-channels = <16>; + }; + + exti: interrupt-controller@5000d000 { + compatible = "st,stm32mp13-exti", "syscon"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000d000 0x400>; + }; + + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + clocks = <&clk_pclk3>; + }; + + mdma: dma-controller@58000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x58000000 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_pclk4>; + #dma-cells = <5>; + dma-channels = <32>; + dma-requests = <48>; + }; + + sdmmc1: mmc@58005000 { + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x20253180>; + reg = <0x58005000 0x1000>, <0x58006000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&clk_pll4_p>; + clock-names = "apb_pclk"; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <130000000>; + status = "disabled"; + }; + + sdmmc2: mmc@58007000 { + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x20253180>; + reg = <0x58007000 0x1000>, <0x58008000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&clk_pll4_p>; + clock-names = "apb_pclk"; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <130000000>; + status = "disabled"; + }; + + iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&clk_pclk4>, <&clk_lsi>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + + bsec: efuse@5c005000 { + compatible = "st,stm32mp13-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + part_number_otp: part_number_otp@4 { + reg = <0x4 0x2>; + }; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp135-pinctrl"; + ranges = <0 0x50002000 0x8400>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOH"; + ngpios = <15>; + gpio-ranges = <&pinctrl 0 112 15>; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOI"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 128 8>; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp133.dtsi b/arch/arm/dts/stm32mp133.dtsi new file mode 100644 index 0000000000..0fb1386257 --- /dev/null +++ b/arch/arm/dts/stm32mp133.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@foss.st.com for STMicroelectronics. + */ + +#include "stm32mp131.dtsi" + +/ { + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp135.dtsi b/arch/arm/dts/stm32mp135.dtsi new file mode 100644 index 0000000000..abf2acd37b --- /dev/null +++ b/arch/arm/dts/stm32mp135.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@foss.st.com for STMicroelectronics. + */ + +#include "stm32mp133.dtsi" + +/ { + soc { + }; +}; diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts new file mode 100644 index 0000000000..ee100d108e --- /dev/null +++ b/arch/arm/dts/stm32mp135f-dk.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@foss.st.com for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP135F-DK Discovery Board"; + compatible = "st,stm32mp135f-dk", "st,stm32mp135"; + + aliases { + serial0 = &uart4; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + vdd_sd: vdd-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp13xc.dtsi b/arch/arm/dts/stm32mp13xc.dtsi new file mode 100644 index 0000000000..fa6889e305 --- /dev/null +++ b/arch/arm/dts/stm32mp13xc.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@foss.st.com for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp13xf.dtsi b/arch/arm/dts/stm32mp13xf.dtsi new file mode 100644 index 0000000000..fa6889e305 --- /dev/null +++ b/arch/arm/dts/stm32mp13xf.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue alexandre.torgue@foss.st.com for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS index 6451195269..d57a49820e 100644 --- a/board/st/stm32mp1/MAINTAINERS +++ b/board/st/stm32mp1/MAINTAINERS @@ -3,6 +3,7 @@ M: Patrick Delaunay patrick.delaunay@foss.st.com L: uboot-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers) T: git https://source.denx.de/u-boot/custodians/u-boot-stm.git S: Maintained +F: arch/arm/dts/stm32mp13* F: arch/arm/dts/stm32mp15* F: board/st/stm32mp1/ F: configs/stm32mp15_defconfig