This is still a non-generic board.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Syed Mohammed Khasim sm.khasim@gmail.com Cc: Sughosh Ganu urwithsughosh@gmail.com ---
Changes in v3: None Changes in v2: None
arch/arm/cpu/arm926ejs/davinci/Kconfig | 4 - board/davinci/da8xxevm/Kconfig | 13 -- board/davinci/da8xxevm/MAINTAINERS | 8 - board/davinci/da8xxevm/Makefile | 1 - board/davinci/da8xxevm/README.hawkboard | 92 ----------- board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 - board/davinci/da8xxevm/hawkboard.c | 120 -------------- board/davinci/da8xxevm/u-boot-spl-hawk.lds | 69 -------- configs/hawkboard_defconfig | 4 - configs/hawkboard_uart_defconfig | 5 - doc/README.scrapyard | 1 + include/configs/hawkboard.h | 220 -------------------------- 12 files changed, 1 insertion(+), 540 deletions(-) delete mode 100644 board/davinci/da8xxevm/README.hawkboard delete mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg delete mode 100644 board/davinci/da8xxevm/hawkboard.c delete mode 100644 board/davinci/da8xxevm/u-boot-spl-hawk.lds delete mode 100644 configs/hawkboard_defconfig delete mode 100644 configs/hawkboard_uart_defconfig delete mode 100644 include/configs/hawkboard.h
diff --git a/arch/arm/cpu/arm926ejs/davinci/Kconfig b/arch/arm/cpu/arm926ejs/davinci/Kconfig index 613f04d..6827721 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Kconfig +++ b/arch/arm/cpu/arm926ejs/davinci/Kconfig @@ -21,10 +21,6 @@ config TARGET_CAM_ENC_4XX bool "CAM ENC 4xx board" select SUPPORT_SPL
-config TARGET_HAWKBOARD - bool "Hawkboard" - select SUPPORT_SPL - config TARGET_DAVINCI_DM355EVM bool "DM355 EVM board"
diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig index 1a841ce..1108e4b 100644 --- a/board/davinci/da8xxevm/Kconfig +++ b/board/davinci/da8xxevm/Kconfig @@ -23,16 +23,3 @@ config SYS_CONFIG_NAME default "da850evm"
endif - -if TARGET_HAWKBOARD - -config SYS_BOARD - default "da8xxevm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "hawkboard" - -endif diff --git a/board/davinci/da8xxevm/MAINTAINERS b/board/davinci/da8xxevm/MAINTAINERS index dd66f07..10c4e2f 100644 --- a/board/davinci/da8xxevm/MAINTAINERS +++ b/board/davinci/da8xxevm/MAINTAINERS @@ -12,11 +12,3 @@ F: include/configs/da850evm.h F: configs/da850_am18xxevm_defconfig F: configs/da850evm_defconfig F: configs/da850evm_direct_nor_defconfig - -HAWKBOARD BOARD -M: Syed Mohammed Khasim sm.khasim@gmail.com -M: Sughosh Ganu urwithsughosh@gmail.com -S: Maintained -F: include/configs/hawkboard.h -F: configs/hawkboard_defconfig -F: configs/hawkboard_uart_defconfig diff --git a/board/davinci/da8xxevm/Makefile b/board/davinci/da8xxevm/Makefile index d3acacc..4da509b 100644 --- a/board/davinci/da8xxevm/Makefile +++ b/board/davinci/da8xxevm/Makefile @@ -9,4 +9,3 @@
obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o -obj-$(CONFIG_MACH_DAVINCI_HAWK) += hawkboard.o diff --git a/board/davinci/da8xxevm/README.hawkboard b/board/davinci/da8xxevm/README.hawkboard deleted file mode 100644 index d6ae02e..0000000 --- a/board/davinci/da8xxevm/README.hawkboard +++ /dev/null @@ -1,92 +0,0 @@ -Summary -======= -The README is for the boot procedure used for TI's OMAP-L138 based -hawkboard. The hawkboard comes with a 128MiB Nand flash and a 128MiB -DDR SDRAM along with a host of other controllers. - -The hawkboard is booted in three stages. The initial bootloader which -executes upon reset is the Rom Boot Loader(RBL) which sits in the -internal ROM of the omap. The RBL initialises the memory and the nand -controller, and copies the image stored at a predefined location(block -1) of the nand flash. The image loaded by the RBL to the memory is the -AIS signed spl image. This, in turns copies the u-boot binary from the -nand flash to the memory and jumps to the u-boot entry point. - -AIS is an image format defined by TI for the images that are to be -loaded to memory by the RBL. The image is divided into a series of -sections and the image's entry point is specified. Each section comes -with meta data like the target address the section is to be copied to -and the size of the section, which is used by the RBL to load the -image. At the end of the image the RBL jumps to the image entry -point. - -The secondary stage bootloader(spl) which is loaded by the RBL then -loads the u-boot from a predefined location in the nand to the memory -and jumps to the u-boot entry point. - -The reason a secondary stage bootloader is used is because the ECC -layout expected by the RBL is not the same as that used by -u-boot/linux. This also implies that for flashing the spl image,we -need to use the u-boot which uses the ECC layout expected by the -RBL[1]. Booting u-boot over UART(UART boot) is explained here[2]. - - -Compilation -=========== -Three images might be needed - -* spl - This is the secondary bootloader which boots the u-boot - binary. - -* u-boot binary - This is the image flashed to the nand and copied to - the memory by the spl. - - Both the images get compiled with hawkboard_config, with the TOPDIR - containing the u-boot images, and the spl image under the spl - directory. - - The spl image needs to be processed with the AISGen tool for - generating the AIS signed image to be flashed. Steps for generating - the AIS image are explained here[3]. - -* u-boot for uart boot - This is same as the u-boot binary generated - above, with the sole difference of the CONFIG_SYS_TEXT_BASE being - 0xc1080000, as expected by the RBL. - - hawkboard_uart_config - - -Flashing the images to Nand -=========================== -The spl AIS image needs to be flashed to the block 1 of the Nand -flash, as that is the location the RBL expects the image[4]. For -flashing the spl, boot over the u-boot specified in [1], and flash the -image - -=> tftpboot 0xc0700000 <nand_spl_ais.bin> -=> nand erase 0x20000 0x20000 -=> nand write.e 0xc0700000 0x20000 <nand_spl_size> - -The u-boot binary is flashed at location 0xe0000(block 6) of the nand -flash. The spl loader expects the u-boot at this location. For -flashing the u-boot binary - -=> tftpboot 0xc0700000 u-boot.bin -=> nand erase 0xe0000 0x40000 -=> nand write.e 0xc0700000 0xe0000 <u-boot-size> - - -Links -===== - -[1] - http://code.google.com/p/hawkboard/downloads/detail?name=u-boot_uart_ais_v1.... - -[2] - http://elinux.org/Hawkboard#Booting_u-boot_over_UART - -[3] - http://elinux.org/Hawkboard#Signing_u-boot_for_UART_boot - -[4] - http://processors.wiki.ti.com/index.php/RBL_UBL_and_host_program#RBL_booting... diff --git a/board/davinci/da8xxevm/hawkboard-ais-nand.cfg b/board/davinci/da8xxevm/hawkboard-ais-nand.cfg deleted file mode 100644 index 2b12b6c..0000000 --- a/board/davinci/da8xxevm/hawkboard-ais-nand.cfg +++ /dev/null @@ -1,4 +0,0 @@ -# PLL0CFG0 PLL0CFG1 -PLL0 0x00180001 0x00000205 -# PLL1CFG0 PLL1CFG1 DRPYC1R SDCR SDTIMR1 SDTIMR2 SDRCR CLK2XSRC -DDR2 0x15010001 0x00000002 0x00000043 0x00134632 0x26492a09 0x7d13c722 0x00000249 0x00000000 diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c deleted file mode 100644 index d5992a5..0000000 --- a/board/davinci/da8xxevm/hawkboard.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Modified for Hawkboard - Syed Mohammed Khasim khasim@beagleboard.org - * - * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc. nsekhar@ti.com - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * Copyright (C) 2004 Texas Instruments. - * Copyright (C) 2012 Sughosh Ganu urwithsughosh@gmail.com. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> -#include <asm/arch/davinci_misc.h> -#include <asm/arch/pinmux_defs.h> -#include <asm/arch/da8xx-usb.h> -#include <ns16550.h> - -DECLARE_GLOBAL_DATA_PTR; - -const struct pinmux_resource pinmuxes[] = { - PINMUX_ITEM(emac_pins_mii), - PINMUX_ITEM(emac_pins_mdio), - PINMUX_ITEM(emifa_pins_cs3), - PINMUX_ITEM(emifa_pins_cs4), - PINMUX_ITEM(emifa_pins_nand), - PINMUX_ITEM(uart2_pins_txrx), - PINMUX_ITEM(uart2_pins_rtscts), -}; - -const int pinmuxes_size = ARRAY_SIZE(pinmuxes); - -const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ - { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ - { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART2 }, /* console */ - { DAVINCI_LPSC_GPIO }, -}; - -const int lpsc_size = ARRAY_SIZE(lpsc); - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_HAWKBOARD; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - return 0; -} - -int board_early_init_f(void) -{ - /* - * Kick Registers need to be set to allow access to Pin Mux registers - */ - writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0); - writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); - - /* set cfgchip3 to select mii */ - writel(readl(&davinci_syscfg_regs->cfgchip3) & - ~(1 << 8), &davinci_syscfg_regs->cfgchip3); - - return 0; -} - -int misc_init_r(void) -{ - char buf[32]; - - printf("ARM Clock : %s MHz\n", - strmhz(buf, clk_get(DAVINCI_ARM_CLKID))); - - return 0; -} - -int usb_phy_on(void) -{ - u32 timeout; - u32 cfgchip2; - - cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2); - - cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | - CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ | - CFGCHIP2_USB1PHYCLKMUX); - cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON | - CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX | - CFGCHIP2_USB1SUSPENDM; - - writel(cfgchip2, &davinci_syscfg_regs->cfgchip2); - - /* wait until the usb phy pll locks */ - timeout = DA8XX_USB_OTG_TIMEOUT; - while (timeout--) - if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD) - return 1; - - /* USB phy was not turned on */ - return 0; -} - -void usb_phy_off(void) -{ - u32 cfgchip2; - - /* - * Power down the on-chip PHY. - */ - cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2); - cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM); - cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET; - writel(cfgchip2, &davinci_syscfg_regs->cfgchip2); -} diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds deleted file mode 100644 index 5c629db..0000000 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0xc1080000; - - . = ALIGN(4); - .text : - { - *(.vectors) - arch/arm/cpu/arm926ejs/start.o (.text*) - arch/arm/cpu/arm926ejs/built-in.o (.text*) - drivers/mtd/nand/built-in.o (.text*) - - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(.rodata*) } - - . = ALIGN(4); - .data : { - *(.data) - __datarel_start = .; - *(.data.rel) - __datarelrolocal_start = .; - *(.data.rel.ro.local) - __datarellocal_start = .; - *(.data.rel.local) - __datarelro_start = .; - *(.data.rel.ro) - } - - . = ALIGN(4); - __image_copy_end = .; - __rel_dyn_start = .; - __rel_dyn_end = .; - - __got_start = .; - . = ALIGN(4); - .got : { *(.got) } - - __got_end = .; - - .bss : - { - . = ALIGN(4); - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } - - .end : - { - *(.__end) - } -} diff --git a/configs/hawkboard_defconfig b/configs/hawkboard_defconfig deleted file mode 100644 index 4084f9c..0000000 --- a/configs/hawkboard_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SPL=y -+S:CONFIG_ARM=y -+S:CONFIG_ARCH_DAVINCI=y -+S:CONFIG_TARGET_HAWKBOARD=y diff --git a/configs/hawkboard_uart_defconfig b/configs/hawkboard_uart_defconfig deleted file mode 100644 index d7eeae7..0000000 --- a/configs/hawkboard_uart_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="UART_U_BOOT" -+S:CONFIG_ARM=y -+S:CONFIG_ARCH_DAVINCI=y -+S:CONFIG_TARGET_HAWKBOARD=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index f34afce..9f84d4a 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +hawkboard arm arm926ejs - - Syed Mohammed Khasim sm.khasim@gmail.com:Sughosh Ganu urwithsughosh@gmail.com tnetv107x arm arm1176 - - Chan-Taek Park c-park@ti.com a320evb arm arm920t - - Po-Yu Chuang ratbert@faraday-tech.com cm4008 arm arm920t - - Greg Ungerer greg.ungerer@opengear.com diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h deleted file mode 100644 index 1d78e72..0000000 --- a/include/configs/hawkboard.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_SYS_USE_NAND 1 - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_HAWK -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg" - -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ - DAVINCI_SYSCFG_SUSPSRC_EMAC | \ - DAVINCI_SYSCFG_SUSPSRC_I2C | \ - DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ - DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_UART2) - -#if defined(CONFIG_UART_U_BOOT) -#define CONFIG_SYS_TEXT_BASE 0xc1080000 -#elif !defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_TEXT_BASE 0xc1180000 -#endif - -/* Spl */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* for udelay and __div64_32 for NAND */ -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-hawk.lds" -#define CONFIG_SPL_TEXT_BASE 0xc1080000 -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE -#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MONITOR_LEN 0x60000 - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * Network & Ethernet Configuration - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* - * Nand Flash - */ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_CLE_MASK 0x10 -#define CONFIG_ALE_MASK 0x8 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST /* SPL nand driver configuration */ -#define CFG_DAVINCI_STD_NAND_LAYOUT -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_PAGE_2K -/* Max number of NAND devices */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, } -/* Block 0--not used by bootcode */ -#define CONFIG_ENV_OFFSET 0x0 - -#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 -#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ - CONFIG_SYS_NAND_U_BOOT_SIZE - \ - CONFIG_SYS_MALLOC_LEN - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_NAND_ECCPOS { \ - 24, 25, 26, 27, 28, \ - 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ - 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ - 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ - 59, 60, 61, 62, 63 } -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 10 -#define CONFIG_SYS_NAND_OOBSIZE 64 - -#endif /* CONFIG_SYS_USE_NAND */ - -/* USB Configs */ -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_OHCI_DA8XX -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x01E25000 -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "hawkboard" - -/* - * U-Boot general configuration - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,"\ - "4M ip=static" -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_USB -#define CONFIG_CMD_EXT2 - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_SYS_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#define CONFIG_CMD_NAND -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#endif /* __CONFIG_H */