This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.
Signed-off-by: Lars Povlsen lars.povlsen@microchip.com --- board/mscc/ocelot/ocelot.c | 6 ++++++ configs/mscc_ocelot_defconfig | 3 +++ 2 files changed, 9 insertions(+)
diff --git a/board/mscc/ocelot/ocelot.c b/board/mscc/ocelot/ocelot.c index a557cacd1b..a05c308669 100644 --- a/board/mscc/ocelot/ocelot.c +++ b/board/mscc/ocelot/ocelot.c @@ -9,6 +9,7 @@ #include <asm/types.h> #include <environment.h> #include <spi.h> +#include <led.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -56,6 +57,11 @@ int board_early_init_r(void)
/* Address of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE; + + /* LED setup */ + if (IS_ENABLED(CONFIG_LED)) + led_default_state(); + return 0; }
diff --git a/configs/mscc_ocelot_defconfig b/configs/mscc_ocelot_defconfig index 66451000d9..fb6a5bdc31 100644 --- a/configs/mscc_ocelot_defconfig +++ b/configs/mscc_ocelot_defconfig @@ -48,6 +48,9 @@ CONFIG_CLK=y CONFIG_DM_GPIO=y CONFIG_MTD=y CONFIG_MTD_SPI_NAND=y +CONFIG_MSCC_SGPIO=y +CONFIG_LED=y +CONFIG_LED_GPIO=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y