st 23. 2. 2022 v 15:36 odesÃlatel Michal Simek michal.simek@xilinx.com napsal:
Hi,
with SOM boards low level sdhci setting is not fully done. There are additional registers which are normally programmed via psu_init() but in this case they are not initialized. Information can be taken from DT and via firmware interface that values can be setup and that's exactly what this series is doing.
Thanks, Michal
Ashok Reddy Soma (4): firmware: zynqmp: Add and update firmware enums firmware: zynqmp: Add support for set sd config and is function supported lib: div64: Add support for round up of div64_u64 mmc: zynq_sdhci: Add support for dynamic configuration
drivers/firmware/firmware-zynqmp.c | 51 +++++++++++++++ drivers/mmc/zynq_sdhci.c | 101 ++++++++++++++++++++++++++++- include/linux/math64.h | 3 + include/zynqmp_firmware.h | 29 +++++++++ 4 files changed, 182 insertions(+), 2 deletions(-)
-- 2.35.1
Applied. M