Hans-Christian Egtvedt wrote:
On Thu, 2008-07-10 at 14:47 +0200, Hans-Christian Egtvedt wrote:
On Thu, 2008-07-10 at 14:45 +0200, Hans-Christian Egtvedt wrote:
On Thu, 2008-07-10 at 13:24 +0200, Haavard Skinnemoen wrote:
<snipp>
Looks good to me, but I don't have the chance to test it.
I tried looking into it, but I do not see who is going to call board_eth_init() ? Is this supposed to be done in net/eth.c or lib_avr32/board.c ?
Cheese, I am blind, just found it almost on top in the eth_initialize() function.
I will pull the master and see if it works.
And it works, proof below (-: (Net: did not work before pulling master)
U-Boot 1.3.3-00248-gae9bc0c-dirty (Jul 10 2008 - 14:50:32)
U-Boot code: 00000000 -> 0000f6b8 data: 000155c0 -> 0004bd18 malloc: Using memory from 0x10f74000 to 0x10fb4000 DMA: Using memory from 0x10f70000 to 0x10f74000 Flash: 8 MB at address 0x00000000 DRAM Configuration: Bank #0: 10000000 16 MB In: serial Out: serial Err: serial Net: macb0 Press SPACE to abort autoboot in 1 seconds macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) BOOTP broadcast 1 DHCP client bound to address 10.191.252.36 Using macb0 device TFTP from server 10.191.252.83; our IP address is 10.191.252.36 Filename 'uimage_br_stk'. Load address: 0x10400000 Loading: T ################################################################# ########### done Bytes transferred = 1111788 (10f6ec hex) ## Booting kernel from Legacy Image at 10400000 ... Image Name: Linux-2.6.25.10.atmel.2 Image Type: AVR32 Linux Kernel Image (gzip compressed) Data Size: 1111724 Bytes = 1.1 MB Load Address: 10000000 Entry Point: 90000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK
Starting kernel at 90000000 (params at 10f74008)...
Linux version 2.6.25.10.atmel.2 (hcegtvedt@ssg-0) (gcc version 4.2.2-atmel.1.0.8) #68 Thu Jul 10 13:16:42 CEST 2008
Good news!
Thanks, Ben