On 1/25/22 10:48, Tony Dinh wrote:
The Pogoplug V4 board has the network chip Marvell 88E1118R. So to properly configure the network, enable CONFIG_PHY_MARVELL to activate the driver M88E1118R.
- This patch depends on the series:
https://patchwork.ozlabs.org/project/uboot/patch/20220124061712.28316-2-mibo...
Signed-off-by: Tony Dinh mibodhi@gmail.com
Applied to u-boot-marvell/master
Thanks, Stefan
configs/pogo_v4_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig index 5490067b9e..1cf409c834 100644 --- a/configs/pogo_v4_defconfig +++ b/configs/pogo_v4_defconfig @@ -62,6 +62,7 @@ CONFIG_KIRKWOOD_GPIO=y CONFIG_MVEBU_MMC=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y CONFIG_DM_ETH=y CONFIG_MVGBE=y CONFIG_MII=y
Viele Grüße, Stefan Roese