Setup initrd_high and fdt_high to be placed in lowmem space for kernel to be able to reach it. Values are setup at run time to ensure that the same setting can be used on different memory setup. Do this setting only when variables are not
Similar run time detection was done for Zynqmp and Versal.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
arch/microblaze/Kconfig | 8 ++++++++ .../microblaze-generic/microblaze-generic.c | 19 +++++++++++++++++++ 2 files changed, 27 insertions(+)
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 5cc68d63c4f7..5ce8261451d3 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -20,6 +20,14 @@ config TARGET_MICROBLAZE_GENERIC
endchoice
+config STACK_SIZE + hex "Define max stack size that can be used by u-boot" + default 0x200000 + help + Defines Max stack size that can be used by u-boot so that the + initrd_high will be calculated as base stack pointer minus this + stack size. + source "board/xilinx/microblaze-generic/Kconfig"
config SPL_LDSCRIPT diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index 4e038ddf0cc7..30be0150f309 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -21,6 +21,7 @@ #include <asm/gpio.h> #include <dm/uclass.h> #include <wdt.h> +#include <linux/sizes.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -39,6 +40,8 @@ int dram_init(void)
int board_late_init(void) { + ulong max_size, lowmem_size; + #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYSRESET_MICROBLAZE) int ret;
@@ -47,5 +50,21 @@ int board_late_init(void) if (ret) printf("Warning: No reset driver: ret=%d\n", ret); #endif + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + max_size = gd->start_addr_sp - CONFIG_STACK_SIZE; + max_size = round_down(max_size, SZ_16M); + + /* Linux default LOWMEM_SIZE is 0x30000000 = 768MB */ + lowmem_size = gd->ram_base + 768 * 1024 * 1024; + + env_set_addr("initrd_high", (void *)min_t(ulong, max_size, + lowmem_size)); + env_set_addr("fdt_high", (void *)min_t(ulong, max_size, lowmem_size)); + return 0; }