Re: [PATCH] xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIG

st 5. 8. 2020 v 14:01 odesílatel Michal Simek michal.simek@xilinx.com napsal:

Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information.

Signed-off-by: Michal Simek michal.simek@xilinx.com

arch/arm/Kconfig | 3 +++ board/xilinx/versal/board.c | 3 +++ board/xilinx/zynq/board.c | 8 ++++++++ board/xilinx/zynqmp/zynqmp.c | 3 +++ 4 files changed, 17 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 156698f23d48..7e54288ad789 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1075,6 +1075,7 @@ config ARCH_VERSAL select DM_SERIAL select OF_CONTROL imply BOARD_LATE_INIT

•   imply ENV_VARS_UBOOT_RUNTIME_CONFIG
  
  

config ARCH_VF610 bool "Freescale Vybrid" @@ -1110,6 +1111,7 @@ config ARCH_ZYNQ imply CMD_CLK imply CMD_DM imply CMD_SPL

•   imply ENV_VARS_UBOOT_RUNTIME_CONFIG
    imply FAT_WRITE
  
  

config ARCH_ZYNQMP_R5 @@ -1149,6 +1151,7 @@ config ARCH_ZYNQMP select ZYNQMP_IPI imply BOARD_LATE_INIT imply CMD_DM

•   imply ENV_VARS_UBOOT_RUNTIME_CONFIG
    imply FAT_WRITE
    imply MP
    imply DM_USB_GADGET
  

diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index 3dc7044b213e..a5ca4ca87401 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -116,6 +116,9 @@ int board_late_init(void) return 0; }

•   if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
  

•           return 0;
  

•   bootmode = versal_get_bootmode();
  
    puts("Bootmode: ");
  

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 2164eac8d518..f98497eb73d6 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -33,6 +33,14 @@ int board_late_init(void) char *new_targets; char *env_targets;

•   if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
  

•           debug("Saved variables - Skipping\n");
  

•           return 0;
  

•   }
  

•   if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
  

•           return 0;
  

•   switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
    case ZYNQ_BM_QSPI:
            mode = "qspi";
  

diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index e8ea3c5a4975..de25f804fcd7 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -521,6 +521,9 @@ int board_late_init(void) return 0; }

•   if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
  

•           return 0;
  

•   ret = set_fdtfile();
    if (ret)
            return ret;
  

-- 2.27.0

Applied with adding missing log.h to zynq/board.c

Thanks, Michal