You are right, there were no UPM support on U-boot-1.2.0. I used patches sended by Anton from here:
http://www.nabble.com/-PATCH-v2-0-5--mpc83xx%3A-MPC8360E-RDK-related-patches...
If I use the latest upstream I will have to do a lot of validations. If a patch nand core, also I will have to validate, but just nand related things.
So if it just a detail in fsl upm driver, will save a lot of time.
Im using a MPC8343 board.
On Thu, Jan 15, 2009 at 4:23 PM, Scott Wood scottwood@freescale.com wrote:
On Thu, Jan 15, 2009 at 02:46:28PM -0200, Alemao wrote:
I was using a NAND flash from ST Micro, 512 Mbit, with no problems in U-boot-1.2.0.
I'm guessing that 1.2.0 was a BSP u-boot, that was not upstream. I don't think upstream 1.2.0 had UPM NAND support.
Could you try the latest upstream U-boot?
What board are you using?
-Scott