Hi Minkyu Kang ,
Thank you for the comments.
On Tue, May 8, 2012 at 7:47 AM, Minkyu Kang promsoft@gmail.com wrote:
Dear Rajeshwari Shinde,
On 4 May 2012 20:12, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
This patch adds functions to enable/disable the power of USB host controller for EXYNOS5.
Signed-off-by: Vivek Gautam gautam.vivek@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
change log.
will do so
This patchset is based on: USB: EXYNOS: Add ehci support.patch
arch/arm/cpu/armv7/exynos/power.c | 37 ++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/power.h | 4 +++ drivers/usb/host/ehci-exynos.c | 4 +++ 3 files changed, 45 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index c765304..b2944b5 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -52,3 +52,40 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable) if (cpu_is_exynos4()) exynos4_mipi_phy_control(dev_index, enable); }
+void exynos5_ps_hold_setup(void) +{
- struct exynos5_power *power =
- (struct exynos5_power *)samsung_get_base_power();
- /* Set PS-Hold high */
- setbits_le32(&power->ps_hold_control, POWER_PS_HOLD_CONTROL_DATA_HIGH);
Then, we can't set ps_hold to low?
-- I have removed this function as it is required for PMIC. This pin need to go high during the booting of our board. Will resubmit this function when Iam sending patches for PMIC
+}
+void exynos5_enable_usb_phy(unsigned int enable) +{
- struct exynos5_power *power =
- (struct exynos5_power *)samsung_get_base_power();
- if (enable) {
- /* Enabling USBHOST_PHY */
- setbits_le32(&power->usbhost_phy_control,
- POWER_USB_HOST_PHY_CTRL_EN);
- } else {
- /* Disabling USBHost_PHY */
USBHOST or USBHost?
-- Corrected
- clrbits_le32(&power->usbhost_phy_control,
- POWER_USB_HOST_PHY_CTRL_EN);
- }
+}
+void ps_hold_setup(void)
set_ps_hold_ctrl.
-- corrected
+{
- if (cpu_is_exynos5())
- exynos5_ps_hold_setup();
+}
+void power_enable_usb_phy(unsigned int enable)
set_usbhost_phy_ctrl.
-- corrected
+{
- if (cpu_is_exynos5())
- exynos5_enable_usb_phy(enable);
+}
Thanks. Minkyu Kang. -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot