Re: [U-Boot] [PATCH][v2] armv8: ls1088a: change dpl load command from apply to lazyapply

On 06/04/2018 09:36 AM, Jagdish Gediya wrote:

use "fsl_mc lazyapply dpl addr" instead of "fsl_mc apply dpl addr"

change dpl load addr to 0x80001000 from 0x80200000 because dpl gets corrupted at 0x80200000 during bootm command excecution.

Signed-off-by: Jagdish Gediya jagdish.gediya@nxp.com

Changes for v2:

• Change dpl load address from 0x80000000 to 0x80001000 as boot.scr is loaded at 0x80000000.

Applied to fsl-qoriq, awaiting upstream. Thanks.

York