On 06.10.21 11:56, Teresa Remmet wrote:
This patchstack contains mainly cleanup for phyCORE-i.MX8MM but also adds:
- SPI NOR flash support
- clk command
- binman support
Teresa
Teresa Remmet (9): board: phytec: phycore_imx8mm: Clean up spl include: configs: phycore_imx8mm: Remove hard coded network settings include: configs: phycore-imx8mm: Remove not needed defines include: configs: phycore-imx8mm: Do not use macro for address arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entry arm: dts: phycore-imx8mm: Fix property board: phytec: phycore-imx8mm: Add SPI-NOR flash support configs: phycore-imx8mm_defconfig: Enable clk command board: phytec: imx8mm-phycore: Switch to binman
arch/arm/dts/phycore-imx8mm-u-boot.dtsi | 126 ++++++++++++++++++ arch/arm/dts/phycore-imx8mm.dts | 30 ++++- arch/arm/mach-imx/imx8m/Kconfig | 1 + board/phytec/phycore_imx8mm/Kconfig | 2 +- .../phytec/phycore_imx8mm/imximage-8mm-sd.cfg | 9 ++ board/phytec/phycore_imx8mm/spl.c | 19 +-- configs/phycore-imx8mm_defconfig | 22 ++- include/configs/phycore_imx8mm.h | 18 +-- 8 files changed, 191 insertions(+), 36 deletions(-) create mode 100644 board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg
For all series:
Reviewed-by: Stefano Babic sbabic@denx.de
Regards, Stefano