The manufacturer delivers the TAM3517 SOM with 4 MAC address. They are stored on the EEPROM of the SOM. The patch adds a function to get their values and set the ethaddr variables.
Signed-off-by: Stefano Babic sbabic@denx.de --- Changes in v2: - Set dispc_config before checking for framebuffer - Use a common macro to set up the horizontal and vertical timing (Heiko Schocker) to not break beagleboard (Jeroen Hofstee)
Changes in v3: - Add further macros to define the single fields (Jeroen Hofstee)
include/configs/tam3517-common.h | 66 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+)
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 24f6f7e..51503da 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -125,6 +125,7 @@ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_PING #define CONFIG_CMD_USB +#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_FLASH /* only NAND on the SOM */ #undef CONFIG_CMD_IMLS @@ -135,6 +136,9 @@ #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 #define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 #define CONFIG_DRIVER_OMAP34XX_I2C
@@ -354,4 +358,66 @@ "fi;" \ "else echo U-Boot not downloaded..exiting;fi\0" \
+ +/* + * this is common code for all TAM3517 boards. + * MAC address is stored from manufacturer in + * I2C EEPROM + */ +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) + +/* + * The I2C EEPROM on the TAM3517 contains + * mac address and production data + */ +struct tam3517_module_info { + char customer[48]; + char product[48]; + + /* + * bit 0~47 : sequence number + * bit 48~55 : week of year, from 0. + * bit 56~63 : year + */ + unsigned long long sequence_number; + + /* + * bit 0~7 : revision fixed + * bit 8~15 : revision major + * bit 16~31 : TNxxx + */ + unsigned int revision; + unsigned char eth_addr[4][8]; + unsigned char _rev[100]; +}; + +#define TAM3517_READ_MAC_FROM_EEPROM \ +do { \ + struct tam3517_module_info info;\ + char buf[80], ethname[20]; \ + int i; \ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ + if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ + (void *)&info, sizeof(info))) \ + break; \ + memset(buf, 0, sizeof(buf)); \ + for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \ + sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ + info.eth_addr[i][5], \ + info.eth_addr[i][4], \ + info.eth_addr[i][3], \ + info.eth_addr[i][2], \ + info.eth_addr[i][1], \ + info.eth_addr[i][0]); \ + \ + if (i) \ + sprintf(ethname, "eth%daddr", i); \ + else \ + sprintf(ethname, "ethaddr"); \ + printf("Setting %s from EEPROM with %s\n", ethname, buf);\ + setenv(ethname, buf); \ + } \ +} while (0) +#endif + #endif /* __TAM3517_H */