Le 06/10/2010 15:30, Wolfgang Denk a écrit :
Dear Prafulla Wadaskar,
In messageF766E4F80769BD478052FB6533FA745D19A69E25C8@SC-VEXCH4.marvell.com you wrote:
After rebasing to new ARM relocation code base and updating Kirkwood board support. I am unable to get my network driver through (mvgbe)
Have you tested this on edminv2 platform? If it is working at your end? Can you please cross check the same with Kirkwood platform?
I am positive that mvgbe driver works, because it initially did not on my edminiv2, and I traced the root cause to gd being trashed between board_init_f and board_init_r; that was fixed before I submitted this patch.
I will test on the openrd platform.
Try running the "dcache off" command before accessing the network and see if this changes anything.
Good suggestion. FTR, I did all of my tests with dcache off only -- never tried to activate any cache.
Best regards,
Wolfgang Denk
Amicalement,