8 Apr
2020
8 Apr
'20
12:14 p.m.
Hi Peng,
On Tue, Apr 7, 2020 at 11:06 PM Peng Fan peng.fan@nxp.com wrote:
Ok, then I think you not have M4 used.
What needs to be done in order to use the M4?
Which kernel are you using? Which SCFW/SECO?
I am using kernel 5.6.2.
SCFW is imx-sc-firmware-1.2.7.1 SECO is imx-seco-2.3.1
If I use the NXP U-Boot from the imx_4.19.35_1.1.0 BSP the reboot works fine.
Any suggestions?
Thanks