Hi,
I've been trying to bring up a vanilla kernel on an XUPV5-LX110T board, and have been having all sorts of odd issues with U-Boot. For example, if I try to enable FIT image support (as noted on http://www.monstr.eu/wiki/doku.php?id=uboot:uboot ), I get CONFIG_BOOTMAPSZ undefined. I've also had to edit image.h to get the thing to compile.
image.c: In function ‘boot_get_fdt’:
image.c:1510: error: ‘bootm_headers_t’ has no member named ‘fit_hdr_fdt’
image.c:1511: error: ‘bootm_headers_t’ has no member named ‘fit_uname_fdt’
image.c:1512: error: ‘bootm_headers_t’ has no member named ‘fit_noffset_fdt’
the fix: edit image.h (line 221): #if defined(CONFIG_OF_LIBFDT) /* WAS: CONFIG_PPC */
FIT support is not in mainline u-boot. Only in my testing repository.
If I fix that and try to load a FIT image with a kernel and device-tree, the bootm command completely ignores the device tree; unfortunately,
Yes the same thing as with FIT. Not in mainline yet. Simple no time. But I have patches in my tree and I want to send them to next merge open window.
I don't have a log of this on hand, because now even image loading has broken somehow. For example, fatls ace 0 gives " 131074 . ", and attempting DHCP boot results in a spew of "ARP Retry count exceeded; starting again" -- retry count exceeded, despite it never having tried even once?
I'll test it.
I've attached a log of the console output under both conditions, as well as the config.mk and xparameters.h under microblaze_generic; for some reason, the given U-Boot BSP assumes 100MHz, despite the board using 125MHz. Does anyone have advice for getting u-boot to work on this board?
I have fix for u-boot bsp which fix it. The same issue is for uart16550.
I am going to update my git repo at http://git.monstr.eu/git/gitweb.cgi There will be updated u-boot bsp too.
Thanks, Michal
Thanks in advance for any help.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot