The SC_* macros represent the address of SysCtrl registers. For a planned new SoC, its base address will be changed.
Turn the SC_* macros into the offset from the base address.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
arch/arm/mach-uniphier/arm32/debug_ll.S | 8 +- arch/arm/mach-uniphier/clk/clk-dram-ld4.c | 12 +-- arch/arm/mach-uniphier/clk/clk-dram-pro5.c | 12 +-- arch/arm/mach-uniphier/clk/clk-dram-pxs2.c | 12 +-- arch/arm/mach-uniphier/clk/clk-early-ld4.c | 10 +-- arch/arm/mach-uniphier/clk/clk-ld20.c | 8 +- arch/arm/mach-uniphier/clk/clk-ld4.c | 12 +-- arch/arm/mach-uniphier/clk/clk-pro4.c | 18 ++-- arch/arm/mach-uniphier/clk/clk-pro5.c | 18 ++-- arch/arm/mach-uniphier/clk/clk-pxs2.c | 22 ++--- arch/arm/mach-uniphier/clk/clk-pxs3.c | 8 +- arch/arm/mach-uniphier/clk/dpll-ld4.c | 8 +- arch/arm/mach-uniphier/clk/dpll-pro4.c | 8 +- arch/arm/mach-uniphier/clk/dpll-sld8.c | 12 +-- arch/arm/mach-uniphier/clk/dpll-tail.c | 4 +- arch/arm/mach-uniphier/clk/pll-base-ld20.c | 41 ++-------- arch/arm/mach-uniphier/clk/pll-ld11.c | 18 ++-- arch/arm/mach-uniphier/clk/pll-ld20.c | 26 +++--- arch/arm/mach-uniphier/clk/pll-ld4.c | 82 +++++++++---------- arch/arm/mach-uniphier/clk/pll-pro4.c | 64 +++++++-------- arch/arm/mach-uniphier/clk/pll-pxs3.c | 30 +++---- .../debug-uart/debug-uart-ld6b.c | 4 +- .../debug-uart/debug-uart-pro4.c | 4 +- .../debug-uart/debug-uart-pro5.c | 4 +- .../debug-uart/debug-uart-pxs2.c | 4 +- arch/arm/mach-uniphier/reset.c | 10 +-- arch/arm/mach-uniphier/sc-regs.h | 49 ++++++----- arch/arm/mach-uniphier/sc64-regs.h | 43 +++++----- 28 files changed, 266 insertions(+), 285 deletions(-)
diff --git a/arch/arm/mach-uniphier/arm32/debug_ll.S b/arch/arm/mach-uniphier/arm32/debug_ll.S index c155246ae8c9..3fed7985fcd6 100644 --- a/arch/arm/mach-uniphier/arm32/debug_ll.S +++ b/arch/arm/mach-uniphier/arm32/debug_ll.S @@ -63,7 +63,7 @@ ld4_end: mov r1, #1 str r1, [r0]
- ldr r0, =SC_CLKCTRL + ldr r0, =(SC_BASE + SC_CLKCTRL) ldr r1, [r0] orr r1, r1, #SC_CLKCTRL_CEN_PERI str r1, [r0] @@ -104,7 +104,7 @@ sld8_end: mov r1, #1 str r1, [r0]
- ldr r0, =SC_CLKCTRL + ldr r0, =(SC_BASE + SC_CLKCTRL) ldr r1, [r0] orr r1, r1, #SC_CLKCTRL_CEN_PERI str r1, [r0] @@ -129,7 +129,7 @@ pro5_end: sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2 sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3
- ldr r0, =SC_CLKCTRL + ldr r0, =(SC_BASE + SC_CLKCTRL) ldr r1, [r0] orr r1, r1, #SC_CLKCTRL_CEN_PERI str r1, [r0] @@ -153,7 +153,7 @@ pxs2_end: sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1 sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2
- ldr r0, =SC_CLKCTRL + ldr r0, =(SC_BASE + SC_CLKCTRL) ldr r1, [r0] orr r1, r1, #SC_CLKCTRL_CEN_PERI str r1, [r0] diff --git a/arch/arm/mach-uniphier/clk/clk-dram-ld4.c b/arch/arm/mach-uniphier/clk/clk-dram-ld4.c index 39cde4400b4e..c796d364bb16 100644 --- a/arch/arm/mach-uniphier/clk/clk-dram-ld4.c +++ b/arch/arm/mach-uniphier/clk/clk-dram-ld4.c @@ -16,14 +16,14 @@ void uniphier_ld4_dram_clk_init(void) u32 tmp;
/* deassert reset */ - tmp = readl(SC_RSTCTRL); + tmp = readl(sc_base + SC_RSTCTRL); tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL); + readl(sc_base + SC_RSTCTRL); /* dummy read */
/* provide clocks */ - tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); tmp |= SC_CLKCTRL_CEN_UMC; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL); + readl(sc_base + SC_CLKCTRL); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-dram-pro5.c b/arch/arm/mach-uniphier/clk/clk-dram-pro5.c index 7674ceb885fa..808d1ebfe190 100644 --- a/arch/arm/mach-uniphier/clk/clk-dram-pro5.c +++ b/arch/arm/mach-uniphier/clk/clk-dram-pro5.c @@ -18,17 +18,17 @@ void uniphier_pro5_dram_clk_init(void) * UMCA1, UMC31: Ch0 (WIO1) * UMCA0, UMC30: Ch0 (WIO0) */ - tmp = readl(SC_RSTCTRL4); + tmp = readl(sc_base + SC_RSTCTRL4); tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30; - writel(tmp, SC_RSTCTRL4); - readl(SC_RSTCTRL4); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL4); + readl(sc_base + SC_RSTCTRL4); /* dummy read */
/* provide clocks */ - tmp = readl(SC_CLKCTRL4); + tmp = readl(sc_base + SC_CLKCTRL4); tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0; - writel(tmp, SC_CLKCTRL4); - readl(SC_CLKCTRL4); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL4); + readl(sc_base + SC_CLKCTRL4); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c b/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c index ad4e83a84a2e..b78bd0167218 100644 --- a/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c +++ b/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c @@ -15,18 +15,18 @@ void uniphier_pxs2_dram_clk_init(void) u32 tmp;
/* deassert reset */ - tmp = readl(SC_RSTCTRL4); + tmp = readl(sc_base + SC_RSTCTRL4); tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30; - writel(tmp, SC_RSTCTRL4); - readl(SC_RSTCTRL4); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL4); + readl(sc_base + SC_RSTCTRL4); /* dummy read */
/* provide clocks */ - tmp = readl(SC_CLKCTRL4); + tmp = readl(sc_base + SC_CLKCTRL4); tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 | SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0; - writel(tmp, SC_CLKCTRL4); - readl(SC_CLKCTRL4); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL4); + readl(sc_base + SC_CLKCTRL4); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-early-ld4.c b/arch/arm/mach-uniphier/clk/clk-early-ld4.c index eb36a9e7ae45..f32f78dd26d8 100644 --- a/arch/arm/mach-uniphier/clk/clk-early-ld4.c +++ b/arch/arm/mach-uniphier/clk/clk-early-ld4.c @@ -17,14 +17,14 @@ void uniphier_ld4_early_clk_init(void)
/* deassert reset */ if (spl_boot_device() != BOOT_DEVICE_NAND) { - tmp = readl(SC_RSTCTRL); + tmp = readl(sc_base + SC_RSTCTRL); tmp &= ~SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); + writel(tmp, sc_base + SC_RSTCTRL); };
/* provide clocks */ - tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL); + readl(sc_base + SC_CLKCTRL); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-ld20.c b/arch/arm/mach-uniphier/clk/clk-ld20.c index 02a14ddfb8bc..397b2d7384fd 100644 --- a/arch/arm/mach-uniphier/clk/clk-ld20.c +++ b/arch/arm/mach-uniphier/clk/clk-ld20.c @@ -15,13 +15,13 @@ void uniphier_ld20_clk_init(void) { u32 tmp;
- tmp = readl(SC_RSTCTRL6); + tmp = readl(sc_base + SC_RSTCTRL6); tmp |= BIT(8); /* Mali */ - writel(tmp, SC_RSTCTRL6); + writel(tmp, sc_base + SC_RSTCTRL6);
- tmp = readl(SC_CLKCTRL6); + tmp = readl(sc_base + SC_CLKCTRL6); tmp |= BIT(8); /* Mali */ - writel(tmp, SC_CLKCTRL6); + writel(tmp, sc_base + SC_CLKCTRL6);
/* TODO: use "mmc-pwrseq-emmc" */ writel(1, SDCTRL_EMMC_HW_RESET); diff --git a/arch/arm/mach-uniphier/clk/clk-ld4.c b/arch/arm/mach-uniphier/clk/clk-ld4.c index 9c88cde5e257..039394250396 100644 --- a/arch/arm/mach-uniphier/clk/clk-ld4.c +++ b/arch/arm/mach-uniphier/clk/clk-ld4.c @@ -15,18 +15,18 @@ void uniphier_ld4_clk_init(void) u32 tmp;
/* deassert reset */ - tmp = readl(SC_RSTCTRL); + tmp = readl(sc_base + SC_RSTCTRL); #ifdef CONFIG_NAND_DENALI tmp |= SC_RSTCTRL_NRST_NAND; #endif - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL); + readl(sc_base + SC_RSTCTRL); /* dummy read */
/* provide clocks */ - tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); #ifdef CONFIG_NAND_DENALI tmp |= SC_CLKCTRL_CEN_NAND; #endif - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL); + readl(sc_base + SC_CLKCTRL); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-pro4.c b/arch/arm/mach-uniphier/clk/clk-pro4.c index 32d44c0b6677..2b364dca4100 100644 --- a/arch/arm/mach-uniphier/clk/clk-pro4.c +++ b/arch/arm/mach-uniphier/clk/clk-pro4.c @@ -15,7 +15,7 @@ void uniphier_pro4_clk_init(void) u32 tmp;
/* deassert reset */ - tmp = readl(SC_RSTCTRL); + tmp = readl(sc_base + SC_RSTCTRL); #ifdef CONFIG_USB_DWC3_UNIPHIER tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 | SC_RSTCTRL_NRST_GIO; @@ -23,18 +23,18 @@ void uniphier_pro4_clk_init(void) #ifdef CONFIG_NAND_DENALI tmp |= SC_RSTCTRL_NRST_NAND; #endif - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL); + readl(sc_base + SC_RSTCTRL); /* dummy read */
#ifdef CONFIG_USB_DWC3_UNIPHIER - tmp = readl(SC_RSTCTRL2); + tmp = readl(sc_base + SC_RSTCTRL2); tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1; - writel(tmp, SC_RSTCTRL2); - readl(SC_RSTCTRL2); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL2); + readl(sc_base + SC_RSTCTRL2); /* dummy read */ #endif
/* provide clocks */ - tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); #ifdef CONFIG_USB_DWC3_UNIPHIER tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | SC_CLKCTRL_CEN_GIO; @@ -42,6 +42,6 @@ void uniphier_pro4_clk_init(void) #ifdef CONFIG_NAND_DENALI tmp |= SC_CLKCTRL_CEN_NAND; #endif - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL); + readl(sc_base + SC_CLKCTRL); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-pro5.c b/arch/arm/mach-uniphier/clk/clk-pro5.c index 338d73d07085..874964b2d5bc 100644 --- a/arch/arm/mach-uniphier/clk/clk-pro5.c +++ b/arch/arm/mach-uniphier/clk/clk-pro5.c @@ -13,25 +13,25 @@ void uniphier_pro5_clk_init(void) u32 tmp;
/* deassert reset */ - tmp = readl(SC_RSTCTRL); + tmp = readl(sc_base + SC_RSTCTRL); #ifdef CONFIG_USB_DWC3_UNIPHIER tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; #endif #ifdef CONFIG_NAND_DENALI tmp |= SC_RSTCTRL_NRST_NAND; #endif - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL); + readl(sc_base + SC_RSTCTRL); /* dummy read */
#ifdef CONFIG_USB_DWC3_UNIPHIER - tmp = readl(SC_RSTCTRL2); + tmp = readl(sc_base + SC_RSTCTRL2); tmp |= SC_RSTCTRL2_NRST_USB3B1; - writel(tmp, SC_RSTCTRL2); - readl(SC_RSTCTRL2); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL2); + readl(sc_base + SC_RSTCTRL2); /* dummy read */ #endif
/* provide clocks */ - tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); #ifdef CONFIG_USB_DWC3_UNIPHIER tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | SC_CLKCTRL_CEN_GIO; @@ -39,6 +39,6 @@ void uniphier_pro5_clk_init(void) #ifdef CONFIG_NAND_DENALI tmp |= SC_CLKCTRL_CEN_NAND; #endif - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL); + readl(sc_base + SC_CLKCTRL); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-pxs2.c b/arch/arm/mach-uniphier/clk/clk-pxs2.c index afa12fa071e7..8cb4f87ae54b 100644 --- a/arch/arm/mach-uniphier/clk/clk-pxs2.c +++ b/arch/arm/mach-uniphier/clk/clk-pxs2.c @@ -14,29 +14,29 @@ void uniphier_pxs2_clk_init(void) u32 tmp;
/* deassert reset */ - tmp = readl(SC_RSTCTRL); + tmp = readl(sc_base + SC_RSTCTRL); #ifdef CONFIG_USB_DWC3_UNIPHIER tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; #endif #ifdef CONFIG_NAND_DENALI tmp |= SC_RSTCTRL_NRST_NAND; #endif - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL); + readl(sc_base + SC_RSTCTRL); /* dummy read */
#ifdef CONFIG_USB_DWC3_UNIPHIER - tmp = readl(SC_RSTCTRL2); + tmp = readl(sc_base + SC_RSTCTRL2); tmp |= SC_RSTCTRL2_NRST_USB3B1; - writel(tmp, SC_RSTCTRL2); - readl(SC_RSTCTRL2); /* dummy read */ + writel(tmp, sc_base + SC_RSTCTRL2); + readl(sc_base + SC_RSTCTRL2); /* dummy read */
- tmp = readl(SC_RSTCTRL6); + tmp = readl(sc_base + SC_RSTCTRL6); tmp |= 0x37; - writel(tmp, SC_RSTCTRL6); + writel(tmp, sc_base + SC_RSTCTRL6); #endif
/* provide clocks */ - tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); #ifdef CONFIG_USB_DWC3_UNIPHIER tmp |= BIT(20) | BIT(19) | SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | SC_CLKCTRL_CEN_GIO; @@ -44,6 +44,6 @@ void uniphier_pxs2_clk_init(void) #ifdef CONFIG_NAND_DENALI tmp |= SC_CLKCTRL_CEN_NAND; #endif - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ + writel(tmp, sc_base + SC_CLKCTRL); + readl(sc_base + SC_CLKCTRL); /* dummy read */ } diff --git a/arch/arm/mach-uniphier/clk/clk-pxs3.c b/arch/arm/mach-uniphier/clk/clk-pxs3.c index 73824e9ace63..33b9c5b73d1b 100644 --- a/arch/arm/mach-uniphier/clk/clk-pxs3.c +++ b/arch/arm/mach-uniphier/clk/clk-pxs3.c @@ -15,13 +15,13 @@ void uniphier_pxs3_clk_init(void) { u32 tmp;
- tmp = readl(SC_RSTCTRL6); + tmp = readl(sc_base + SC_RSTCTRL6); tmp |= BIT(8); /* Mali */ - writel(tmp, SC_RSTCTRL6); + writel(tmp, sc_base + SC_RSTCTRL6);
- tmp = readl(SC_CLKCTRL6); + tmp = readl(sc_base + SC_CLKCTRL6); tmp |= BIT(8); /* Mali */ - writel(tmp, SC_CLKCTRL6); + writel(tmp, sc_base + SC_CLKCTRL6);
/* TODO: use "mmc-pwrseq-emmc" */ writel(1, SDCTRL_EMMC_HW_RESET); diff --git a/arch/arm/mach-uniphier/clk/dpll-ld4.c b/arch/arm/mach-uniphier/clk/dpll-ld4.c index 4b9ec075a848..72fe8db8dd1d 100644 --- a/arch/arm/mach-uniphier/clk/dpll-ld4.c +++ b/arch/arm/mach-uniphier/clk/dpll-ld4.c @@ -23,7 +23,7 @@ int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd) * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) * to FOUT (DPLLCTRL.bit[29:20]) */ - tmp = readl(SC_DPLLCTRL); + tmp = readl(sc_base + SC_DPLLCTRL); tmp &= ~0x000f0000; switch (dram_freq) { case 1333: @@ -42,11 +42,11 @@ int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd) #else tmp |= SC_DPLLCTRL_SSC_RATE; #endif - writel(tmp, SC_DPLLCTRL); + writel(tmp, sc_base + SC_DPLLCTRL);
- tmp = readl(SC_DPLLCTRL2); + tmp = readl(sc_base + SC_DPLLCTRL2); tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); + writel(tmp, sc_base + SC_DPLLCTRL2);
/* Wait 500 usec until dpll gets stable */ udelay(500); diff --git a/arch/arm/mach-uniphier/clk/dpll-pro4.c b/arch/arm/mach-uniphier/clk/dpll-pro4.c index 29659464b57c..62594954848c 100644 --- a/arch/arm/mach-uniphier/clk/dpll-pro4.c +++ b/arch/arm/mach-uniphier/clk/dpll-pro4.c @@ -23,7 +23,7 @@ int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd) * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) * to FOUT ( DPLLCTRL.bit[29:20] ) */ - tmp = readl(SC_DPLLCTRL); + tmp = readl(sc_base + SC_DPLLCTRL); tmp &= ~(0x000f0000); switch (dram_freq) { case 1333: @@ -46,11 +46,11 @@ int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd) #else tmp |= 0x00008000; #endif - writel(tmp, SC_DPLLCTRL); + writel(tmp, sc_base + SC_DPLLCTRL);
- tmp = readl(SC_DPLLCTRL2); + tmp = readl(sc_base + SC_DPLLCTRL2); tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); + writel(tmp, sc_base + SC_DPLLCTRL2);
/* Wait until dpll gets stable */ udelay(500); diff --git a/arch/arm/mach-uniphier/clk/dpll-sld8.c b/arch/arm/mach-uniphier/clk/dpll-sld8.c index 1d7b75219849..1ac52d11f34a 100644 --- a/arch/arm/mach-uniphier/clk/dpll-sld8.c +++ b/arch/arm/mach-uniphier/clk/dpll-sld8.c @@ -22,10 +22,10 @@ int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd) * [4] ICPD_TEST 0x1 * [3:0] ICPD 0xb */ - tmp = readl(SC_DPLLCTRL3); + tmp = readl(sc_base + SC_DPLLCTRL3); tmp &= ~0x00ff0717; tmp |= 0x00d0061b; - writel(tmp, SC_DPLLCTRL3); + writel(tmp, sc_base + SC_DPLLCTRL3);
/* * Set DPLL SSC parameters for DPLLCTRL @@ -33,14 +33,14 @@ int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd) * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) */ - tmp = readl(SC_DPLLCTRL); + tmp = readl(sc_base + SC_DPLLCTRL); tmp &= ~0x3ff07fff; #ifdef DPLL_SSC_RATE_1PER tmp |= 0x084018bf; #else tmp |= 0x084031a6; #endif - writel(tmp, SC_DPLLCTRL); + writel(tmp, sc_base + SC_DPLLCTRL);
/* * Set DPLL SSC parameters for DPLLCTRL2 @@ -49,10 +49,10 @@ int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd) * [26:20] SSC_M 79 (0x4f) * [19:0] SSC_K 964689 (0xeb851) */ - tmp = readl(SC_DPLLCTRL2); + tmp = readl(sc_base + SC_DPLLCTRL2); tmp &= ~0xefffffff; tmp |= 0x0cfeb851; - writel(tmp, SC_DPLLCTRL2); + writel(tmp, sc_base + SC_DPLLCTRL2);
/* Wait 500 usec until dpll gets stable */ udelay(500); diff --git a/arch/arm/mach-uniphier/clk/dpll-tail.c b/arch/arm/mach-uniphier/clk/dpll-tail.c index 7f434f669627..6ba5a3672743 100644 --- a/arch/arm/mach-uniphier/clk/dpll-tail.c +++ b/arch/arm/mach-uniphier/clk/dpll-tail.c @@ -14,7 +14,7 @@ void uniphier_ld4_dpll_ssc_en(void) { u32 tmp;
- tmp = readl(SC_DPLLCTRL); + tmp = readl(sc_base + SC_DPLLCTRL); tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); + writel(tmp, sc_base + SC_DPLLCTRL); } diff --git a/arch/arm/mach-uniphier/clk/pll-base-ld20.c b/arch/arm/mach-uniphier/clk/pll-base-ld20.c index 67b8ee7c3e31..ea96d739c53d 100644 --- a/arch/arm/mach-uniphier/clk/pll-base-ld20.c +++ b/arch/arm/mach-uniphier/clk/pll-base-ld20.c @@ -12,6 +12,7 @@ #include <linux/io.h> #include <linux/sizes.h>
+#include "../sc64-regs.h" #include "pll.h"
/* PLL type: SSC */ @@ -31,13 +32,9 @@ int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq, unsigned int ssc_rate, unsigned int divn) { - void __iomem *base; + void __iomem *base = sc_base + reg_base; u32 tmp;
- base = ioremap(reg_base, SZ_16); - if (!base) - return -ENOMEM; - if (freq != UNIPHIER_PLL_FREQ_DEFAULT) { tmp = readl(base); /* SSCPLLCTRL */ tmp &= ~SC_PLLCTRL_SSC_DK_MASK; @@ -60,57 +57,39 @@ int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq, tmp |= SC_PLLCTRL2_NRSTDS; writel(tmp, base + 4);
- iounmap(base); - return 0; }
int uniphier_ld20_sscpll_ssc_en(unsigned long reg_base) { - void __iomem *base; + void __iomem *base = sc_base + reg_base; u32 tmp;
- base = ioremap(reg_base, SZ_16); - if (!base) - return -ENOMEM; - tmp = readl(base); /* SSCPLLCTRL */ tmp |= SC_PLLCTRL_SSC_EN; writel(tmp, base);
- iounmap(base); - return 0; }
int uniphier_ld20_sscpll_set_regi(unsigned long reg_base, unsigned regi) { - void __iomem *base; + void __iomem *base = sc_base + reg_base; u32 tmp;
- base = ioremap(reg_base, SZ_16); - if (!base) - return -ENOMEM; - tmp = readl(base + 8); /* SSCPLLCTRL3 */ tmp &= ~SC_PLLCTRL3_REGI_MASK; tmp |= FIELD_PREP(SC_PLLCTRL3_REGI_MASK, regi); writel(tmp, base + 8);
- iounmap(base); - return 0; }
int uniphier_ld20_vpll27_init(unsigned long reg_base) { - void __iomem *base; + void __iomem *base = sc_base + reg_base; u32 tmp;
- base = ioremap(reg_base, SZ_16); - if (!base) - return -ENOMEM; - tmp = readl(base); /* VPLL27CTRL */ tmp |= SC_VPLL27CTRL_WP; /* write protect off */ writel(tmp, base); @@ -123,25 +102,17 @@ int uniphier_ld20_vpll27_init(unsigned long reg_base) tmp &= ~SC_VPLL27CTRL_WP; /* write protect on */ writel(tmp, base);
- iounmap(base); - return 0; }
int uniphier_ld20_dspll_init(unsigned long reg_base) { - void __iomem *base; + void __iomem *base = sc_base + reg_base; u32 tmp;
- base = ioremap(reg_base, SZ_16); - if (!base) - return -ENOMEM; - tmp = readl(base + 4); /* DSPLLCTRL2 */ tmp |= SC_DSPLLCTRL2_K_LD; writel(tmp, base + 4);
- iounmap(base); - return 0; } diff --git a/arch/arm/mach-uniphier/clk/pll-ld11.c b/arch/arm/mach-uniphier/clk/pll-ld11.c index fd724f3e8c21..7f07e3e92b86 100644 --- a/arch/arm/mach-uniphier/clk/pll-ld11.c +++ b/arch/arm/mach-uniphier/clk/pll-ld11.c @@ -11,15 +11,15 @@ #include "pll.h"
/* PLL type: SSC */ -#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */ -#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */ -#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* DSP */ -#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x1440) /* Video codec, VPE etc. */ -#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1460) /* DDR memory */ +#define SC_CPLLCTRL 0x1400 /* CPU/ARM */ +#define SC_SPLLCTRL 0x1410 /* misc */ +#define SC_MPLLCTRL 0x1430 /* DSP */ +#define SC_VSPLLCTRL 0x1440 /* Video codec, VPE etc. */ +#define SC_DPLLCTRL 0x1460 /* DDR memory */
/* PLL type: VPLL27 */ -#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) -#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) +#define SC_VPLL27FCTRL 0x1500 +#define SC_VPLL27ACTRL 0x1520
void uniphier_ld11_pll_init(void) { @@ -40,6 +40,6 @@ void uniphier_ld11_pll_init(void) uniphier_ld20_vpll27_init(SC_VPLL27FCTRL); uniphier_ld20_vpll27_init(SC_VPLL27ACTRL);
- writel(0, SC_CA53_GEARSET); /* Gear0: CPLL/2 */ - writel(SC_CA_GEARUPD, SC_CA53_GEARUPD); + writel(0, sc_base + SC_CA53_GEARSET); /* Gear0: CPLL/2 */ + writel(SC_CA_GEARUPD, sc_base + SC_CA53_GEARUPD); } diff --git a/arch/arm/mach-uniphier/clk/pll-ld20.c b/arch/arm/mach-uniphier/clk/pll-ld20.c index 682bd1e0c12e..04b3312a2a5a 100644 --- a/arch/arm/mach-uniphier/clk/pll-ld20.c +++ b/arch/arm/mach-uniphier/clk/pll-ld20.c @@ -11,23 +11,23 @@ #include "pll.h"
/* PLL type: SSC */ -#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */ -#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */ -#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* DSP */ -#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* Video codec */ -#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1440) /* VPE etc. */ -#define SC_GPPLLCTRL (SC_BASE_ADDR | 0x1450) /* GPU/Mali */ -#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1460) /* DDR memory 0 */ -#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1470) /* DDR memory 1 */ -#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x1480) /* DDR memory 2 */ +#define SC_CPLLCTRL 0x1400 /* CPU/ARM */ +#define SC_SPLLCTRL 0x1410 /* misc */ +#define SC_SPLL2CTRL 0x1420 /* DSP */ +#define SC_MPLLCTRL 0x1430 /* Video codec */ +#define SC_VPPLLCTRL 0x1440 /* VPE etc. */ +#define SC_GPPLLCTRL 0x1450 /* GPU/Mali */ +#define SC_DPLL0CTRL 0x1460 /* DDR memory 0 */ +#define SC_DPLL1CTRL 0x1470 /* DDR memory 1 */ +#define SC_DPLL2CTRL 0x1480 /* DDR memory 2 */
/* PLL type: VPLL27 */ -#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) -#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) +#define SC_VPLL27FCTRL 0x1500 +#define SC_VPLL27ACTRL 0x1520
/* PLL type: DSPLL */ -#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540) -#define SC_A2PLLCTRL (SC_BASE_ADDR | 0x15C0) +#define SC_VPLL8KCTRL 0x1540 +#define SC_A2PLLCTRL 0x15C0
void uniphier_ld20_pll_init(void) { diff --git a/arch/arm/mach-uniphier/clk/pll-ld4.c b/arch/arm/mach-uniphier/clk/pll-ld4.c index 34f1c9cc2898..c66031bdd05a 100644 --- a/arch/arm/mach-uniphier/clk/pll-ld4.c +++ b/arch/arm/mach-uniphier/clk/pll-ld4.c @@ -21,9 +21,9 @@ static void upll_init(void) clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); + tmp = readl(sc_base + SC_UPLLCTRL); tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); + writel(tmp, sc_base + SC_UPLLCTRL);
if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || @@ -38,18 +38,18 @@ static void upll_init(void) } }
- writel(tmp, SC_UPLLCTRL); + writel(tmp, sc_base + SC_UPLLCTRL);
/* set 1 to K_LD(UPLLCTRL.bit[27]) */ tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); + writel(tmp, sc_base + SC_UPLLCTRL);
/* wait 10 usec */ udelay(10);
/* set 1 to SNRT(UPLLCTRL.bit[28]) */ tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); + writel(tmp, sc_base + SC_UPLLCTRL); }
static void vpll_init(void) @@ -60,88 +60,88 @@ static void vpll_init(void) clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27ACTRL); tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27BCTRL); tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27BCTRL);
/* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27ACTRL2); tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27BCTRL2); tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27BCTRL2);
/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27ACTRL2); tmp &= ~0x0000007f; tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27BCTRL2); tmp &= ~0x0000007f; tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp &= ~0x000fffff; tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp &= ~0x000fffff; tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3); } else { /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp &= ~0x000fffff; tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp &= ~0x000fffff; tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3); }
/* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* wait 10 usec */ udelay(10);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27ACTRL2); tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27BCTRL2); tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27BCTRL2);
/* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27ACTRL); tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27BCTRL); tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27BCTRL); }
void uniphier_ld4_pll_init(void) diff --git a/arch/arm/mach-uniphier/clk/pll-pro4.c b/arch/arm/mach-uniphier/clk/pll-pro4.c index 312a5fcfdfcf..b7dc3e261f81 100644 --- a/arch/arm/mach-uniphier/clk/pll-pro4.c +++ b/arch/arm/mach-uniphier/clk/pll-pro4.c @@ -26,80 +26,80 @@ static void vpll_init(void) return;
/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27ACTRL); tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27BCTRL); tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27BCTRL);
/* Unset VPLA_K_LD and VPLB_K_LD bit */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* Set VPLA_M and VPLB_M to 0x20 */ - tmp = readl(SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27ACTRL2); tmp &= ~0x0000007f; tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27BCTRL2); tmp &= ~0x0000007f; tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { /* Set VPLA_K and VPLB_K for AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp &= ~0x000fffff; tmp |= 0x00066666; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp &= ~0x000fffff; tmp |= 0x00066666; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3); } else { /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp &= ~0x000fffff; tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp &= ~0x000fffff; tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3); }
/* wait 1 usec */ udelay(1);
/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ - tmp = readl(SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27ACTRL3); tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27ACTRL3); + tmp = readl(sc_base + SC_VPLL27BCTRL3); tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); + writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* Unset VPLA_SNRST and VPLB_SNRST bit */ - tmp = readl(SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27ACTRL2); tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27ACTRL2); + tmp = readl(sc_base + SC_VPLL27BCTRL2); tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); + writel(tmp, sc_base + SC_VPLL27BCTRL2);
/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27ACTRL); tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27ACTRL); + tmp = readl(sc_base + SC_VPLL27BCTRL); tmp &= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); + writel(tmp, sc_base + SC_VPLL27BCTRL); }
void uniphier_pro4_pll_init(void) diff --git a/arch/arm/mach-uniphier/clk/pll-pxs3.c b/arch/arm/mach-uniphier/clk/pll-pxs3.c index 5a1b1d25aca6..278f530ea9a3 100644 --- a/arch/arm/mach-uniphier/clk/pll-pxs3.c +++ b/arch/arm/mach-uniphier/clk/pll-pxs3.c @@ -10,25 +10,25 @@ #include "pll.h"
/* PLL type: SSC */ -#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */ -#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */ -#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* DSP */ -#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1430) /* VPE */ -#define SC_VGPLLCTRL (SC_BASE_ADDR | 0x1440) -#define SC_DECPLLCTRL (SC_BASE_ADDR | 0x1450) -#define SC_ENCPLLCTRL (SC_BASE_ADDR | 0x1460) -#define SC_PXFPLLCTRL (SC_BASE_ADDR | 0x1470) -#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1480) /* DDR memory 0 */ -#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1490) /* DDR memory 1 */ -#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x14a0) /* DDR memory 2 */ -#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x14c0) +#define SC_CPLLCTRL 0x1400 /* CPU/ARM */ +#define SC_SPLLCTRL 0x1410 /* misc */ +#define SC_SPLL2CTRL 0x1420 /* DSP */ +#define SC_VPPLLCTRL 0x1430 /* VPE */ +#define SC_VGPLLCTRL 0x1440 +#define SC_DECPLLCTRL 0x1450 +#define SC_ENCPLLCTRL 0x1460 +#define SC_PXFPLLCTRL 0x1470 +#define SC_DPLL0CTRL 0x1480 /* DDR memory 0 */ +#define SC_DPLL1CTRL 0x1490 /* DDR memory 1 */ +#define SC_DPLL2CTRL 0x14a0 /* DDR memory 2 */ +#define SC_VSPLLCTRL 0x14c0
/* PLL type: VPLL27 */ -#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) -#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) +#define SC_VPLL27FCTRL 0x1500 +#define SC_VPLL27ACTRL 0x1520
/* PLL type: DSPLL */ -#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540) +#define SC_VPLL8KCTRL 0x1540
void uniphier_pxs3_pll_init(void) { diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c index 22d2caa1099e..f64ff39c9e65 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c @@ -22,9 +22,9 @@ unsigned int uniphier_ld6b_debug_uart_init(void) sg_set_pinsel(115, 0, 8, 4); /* TXD1 -> TXD1 */ sg_set_pinsel(113, 2, 8, 4); /* SBO0 -> TXD2 */
- tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); tmp |= SC_CLKCTRL_CEN_PERI; - writel(tmp, SC_CLKCTRL); + writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_LD6B_UART_CLK, 16 * CONFIG_BAUDRATE); } diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c index 9017a24a1049..79c6c101e229 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c @@ -22,9 +22,9 @@ unsigned int uniphier_pro4_debug_uart_init(void)
writel(1, sg_base + SG_LOADPINCTRL);
- tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); tmp |= SC_CLKCTRL_CEN_PERI; - writel(tmp, SC_CLKCTRL); + writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_PRO4_UART_CLK, 16 * CONFIG_BAUDRATE); } diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c index 8e4d15c2913e..ef3b383ee431 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c @@ -25,9 +25,9 @@ unsigned int uniphier_pro5_debug_uart_init(void)
writel(1, sg_base + SG_LOADPINCTRL);
- tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); tmp |= SC_CLKCTRL_CEN_PERI; - writel(tmp, SC_CLKCTRL); + writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_PRO5_UART_CLK, 16 * CONFIG_BAUDRATE); } diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c index 5d50c4fa244a..ee8caad1d458 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c @@ -23,9 +23,9 @@ unsigned int uniphier_pxs2_debug_uart_init(void) sg_set_pinsel(113, 8, 8, 4); /* TXD2 -> TXD2 */ sg_set_pinsel(219, 8, 8, 4); /* TXD3 -> TXD3 */
- tmp = readl(SC_CLKCTRL); + tmp = readl(sc_base + SC_CLKCTRL); tmp |= SC_CLKCTRL_CEN_PERI; - writel(tmp, SC_CLKCTRL); + writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_PXS2_UART_CLK, 16 * CONFIG_BAUDRATE); } diff --git a/arch/arm/mach-uniphier/reset.c b/arch/arm/mach-uniphier/reset.c index 28c95e2ce580..31685d000940 100644 --- a/arch/arm/mach-uniphier/reset.c +++ b/arch/arm/mach-uniphier/reset.c @@ -22,14 +22,14 @@ void __SECURE reset_cpu(unsigned long ignored) { u32 tmp;
- writel(5, SC_IRQTIMSET); /* default value */ + writel(5, sc_base + SC_IRQTIMSET); /* default value */
- tmp = readl(SC_SLFRSTSEL); + tmp = readl(sc_base + SC_SLFRSTSEL); tmp &= ~0x3; /* mask [1:0] */ tmp |= 0x0; /* XRST reboot */ - writel(tmp, SC_SLFRSTSEL); + writel(tmp, sc_base + SC_SLFRSTSEL);
- tmp = readl(SC_SLFRSTCTL); + tmp = readl(sc_base + SC_SLFRSTCTL); tmp |= 0x1; - writel(tmp, SC_SLFRSTCTL); + writel(tmp, sc_base + SC_SLFRSTCTL); } diff --git a/arch/arm/mach-uniphier/sc-regs.h b/arch/arm/mach-uniphier/sc-regs.h index 28de19c039c2..e43116e064bd 100644 --- a/arch/arm/mach-uniphier/sc-regs.h +++ b/arch/arm/mach-uniphier/sc-regs.h @@ -10,31 +10,36 @@ #ifndef ARCH_SC_REGS_H #define ARCH_SC_REGS_H
-#define SC_BASE_ADDR 0x61840000 +#ifndef __ASSEMBLY__ +#include <linux/compiler.h> +#define sc_base ((void __iomem *)SC_BASE) +#endif
-#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) +#define SC_BASE 0x61840000 + +#define SC_DPLLCTRL 0x1200 #define SC_DPLLCTRL_SSC_EN (0x1 << 31) #define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) #define SC_DPLLCTRL_SSC_RATE (0x1 << 15)
-#define SC_DPLLCTRL2 (SC_BASE_ADDR | 0x1204) +#define SC_DPLLCTRL2 0x1204 #define SC_DPLLCTRL2_NRSTDS (0x1 << 28)
-#define SC_DPLLCTRL3 (SC_BASE_ADDR | 0x1208) +#define SC_DPLLCTRL3 0x1208 #define SC_DPLLCTRL3_LPFSEL_COEF2 (0x0 << 31) #define SC_DPLLCTRL3_LPFSEL_COEF3 (0x1 << 31)
-#define SC_UPLLCTRL (SC_BASE_ADDR | 0x1210) +#define SC_UPLLCTRL 0x1210
-#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1270) -#define SC_VPLL27ACTRL2 (SC_BASE_ADDR | 0x1274) -#define SC_VPLL27ACTRL3 (SC_BASE_ADDR | 0x1278) +#define SC_VPLL27ACTRL 0x1270 +#define SC_VPLL27ACTRL2 0x1274 +#define SC_VPLL27ACTRL3 0x1278
-#define SC_VPLL27BCTRL (SC_BASE_ADDR | 0x1290) -#define SC_VPLL27BCTRL2 (SC_BASE_ADDR | 0x1294) -#define SC_VPLL27BCTRL3 (SC_BASE_ADDR | 0x1298) +#define SC_VPLL27BCTRL 0x1290 +#define SC_VPLL27BCTRL2 0x1294 +#define SC_VPLL27BCTRL3 0x1298
-#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000) +#define SC_RSTCTRL 0x2000 #define SC_RSTCTRL_NRST_USB3B0 (0x1 << 17) /* USB3 #0 bus */ #define SC_RSTCTRL_NRST_USB3C0 (0x1 << 16) /* USB3 #0 core */ #define SC_RSTCTRL_NRST_ETHER (0x1 << 12) @@ -44,14 +49,14 @@ #define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) #define SC_RSTCTRL_NRST_NAND (0x1 << 2)
-#define SC_RSTCTRL2 (SC_BASE_ADDR | 0x2004) +#define SC_RSTCTRL2 0x2004 #define SC_RSTCTRL2_NRST_USB3B1 (0x1 << 17) /* USB3 #1 bus */ #define SC_RSTCTRL2_NRST_USB3C1 (0x1 << 16) /* USB3 #1 core */
-#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) +#define SC_RSTCTRL3 0x2008
/* Pro5 or newer */ -#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c) +#define SC_RSTCTRL4 0x200c #define SC_RSTCTRL4_NRST_UMCSB (0x1 << 12) /* UMC system bus */ #define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */ #define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */ @@ -60,11 +65,11 @@ #define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */ #define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */
-#define SC_RSTCTRL5 (SC_BASE_ADDR | 0x2010) +#define SC_RSTCTRL5 0x2010
-#define SC_RSTCTRL6 (SC_BASE_ADDR | 0x2014) +#define SC_RSTCTRL6 0x2014
-#define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) +#define SC_CLKCTRL 0x2104 #define SC_CLKCTRL_CEN_USB31 (0x1 << 17) /* USB3 #1 */ #define SC_CLKCTRL_CEN_USB30 (0x1 << 16) /* USB3 #0 */ #define SC_CLKCTRL_CEN_ETHER (0x1 << 12) @@ -76,15 +81,15 @@ #define SC_CLKCTRL_CEN_PERI (0x1 << 0)
/* Pro5 or newer */ -#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c) +#define SC_CLKCTRL4 0x210c #define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */ #define SC_CLKCTRL4_CEN_UMC2 (0x1 << 2) /* UMC ch2 */ #define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */ #define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */
/* System reset control register */ -#define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) -#define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) -#define SC_SLFRSTCTL (SC_BASE_ADDR | 0x3014) +#define SC_IRQTIMSET 0x3000 +#define SC_SLFRSTSEL 0x3010 +#define SC_SLFRSTCTL 0x3014
#endif /* ARCH_SC_REGS_H */ diff --git a/arch/arm/mach-uniphier/sc64-regs.h b/arch/arm/mach-uniphier/sc64-regs.h index 83f34e3faf1e..1f3b41a336b3 100644 --- a/arch/arm/mach-uniphier/sc64-regs.h +++ b/arch/arm/mach-uniphier/sc64-regs.h @@ -9,28 +9,33 @@ #ifndef SC64_REGS_H #define SC64_REGS_H
-#define SC_BASE_ADDR 0x61840000 +#ifndef __ASSEMBLY__ +#include <linux/compiler.h> +#define sc_base ((void __iomem *)SC_BASE) +#endif
-#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000) -#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) -#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c) -#define SC_RSTCTRL5 (SC_BASE_ADDR | 0x2010) -#define SC_RSTCTRL6 (SC_BASE_ADDR | 0x2014) -#define SC_RSTCTRL7 (SC_BASE_ADDR | 0x2018) +#define SC_BASE 0x61840000
-#define SC_CLKCTRL (SC_BASE_ADDR | 0x2100) -#define SC_CLKCTRL3 (SC_BASE_ADDR | 0x2108) -#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c) -#define SC_CLKCTRL5 (SC_BASE_ADDR | 0x2110) -#define SC_CLKCTRL6 (SC_BASE_ADDR | 0x2114) -#define SC_CLKCTRL7 (SC_BASE_ADDR | 0x2118) +#define SC_RSTCTRL 0x2000 +#define SC_RSTCTRL3 0x2008 +#define SC_RSTCTRL4 0x200c +#define SC_RSTCTRL5 0x2010 +#define SC_RSTCTRL6 0x2014 +#define SC_RSTCTRL7 0x2018
-#define SC_CA72_GEARST (SC_BASE_ADDR | 0x8000) -#define SC_CA72_GEARSET (SC_BASE_ADDR | 0x8004) -#define SC_CA72_GEARUPD (SC_BASE_ADDR | 0x8008) -#define SC_CA53_GEARST (SC_BASE_ADDR | 0x8080) -#define SC_CA53_GEARSET (SC_BASE_ADDR | 0x8084) -#define SC_CA53_GEARUPD (SC_BASE_ADDR | 0x8088) +#define SC_CLKCTRL 0x2100 +#define SC_CLKCTRL3 0x2108 +#define SC_CLKCTRL4 0x210c +#define SC_CLKCTRL5 0x2110 +#define SC_CLKCTRL6 0x2114 +#define SC_CLKCTRL7 0x2118 + +#define SC_CA72_GEARST 0x8000 +#define SC_CA72_GEARSET 0x8004 +#define SC_CA72_GEARUPD 0x8008 +#define SC_CA53_GEARST 0x8080 +#define SC_CA53_GEARSET 0x8084 +#define SC_CA53_GEARUPD 0x8088 #define SC_CA_GEARUPD (1 << 0)
#endif /* SC64_REGS_H */