On 4/27/23 22:37, Igor Prusov wrote:
Switch to using new dump operation in clock provider drivers instead of overriding soc_clk_dump.
Signed-off-by: Igor Prusov ivprusov@sberdevices.ru
arch/mips/mach-pic32/cpu.c | 23 --------------- drivers/clk/aspeed/clk_ast2600.c | 13 ++++----- drivers/clk/clk_k210.c | 11 +++----- drivers/clk/clk_pic32.c | 39 ++++++++++++++++++++++++++ drivers/clk/clk_versal.c | 7 ++++- drivers/clk/clk_zynq.c | 19 ++++--------- drivers/clk/clk_zynqmp.c | 13 ++++----- drivers/clk/imx/clk-imx8.c | 11 +++----- drivers/clk/mvebu/armada-37xx-periph.c | 5 +++- drivers/clk/stm32/clk-stm32mp1.c | 29 ++++++------------- 10 files changed, 83 insertions(+), 87 deletions(-)
diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c index de449e3c6a..2875a1ec7c 100644 --- a/arch/mips/mach-pic32/cpu.c +++ b/arch/mips/mach-pic32/cpu.c @@ -148,26 +148,3 @@ const char *get_core_name(void) return str; } #endif -#ifdef CONFIG_CMD_CLK
-int soc_clk_dump(void) -{
- int i;
- printf("PLL Speed: %lu MHz\n",
CLK_MHZ(rate(PLLCLK)));- printf("CPU Speed: %lu MHz\n", CLK_MHZ(rate(PB7CLK)));
- printf("MPLL Speed: %lu MHz\n", CLK_MHZ(rate(MPLL)));
- for (i = PB1CLK; i <= PB7CLK; i++)
printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,CLK_MHZ(rate(i)));- for (i = REF1CLK; i <= REF5CLK; i++)
printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,CLK_MHZ(rate(i)));- return 0;
-} -#endif diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c index b3cc8392fa..08db21d394 100644 --- a/drivers/clk/aspeed/clk_ast2600.c +++ b/drivers/clk/aspeed/clk_ast2600.c @@ -1109,6 +1109,7 @@ struct aspeed_clks { const char *name; };
+#if IS_ENABLED(CONFIG_CMD_CLK) static struct aspeed_clks aspeed_clk_names[] = { { ASPEED_CLK_HPLL, "hpll" }, { ASPEED_CLK_MPLL, "mpll" }, @@ -1123,18 +1124,12 @@ static struct aspeed_clks aspeed_clk_names[] = { { ASPEED_CLK_HUARTX, "huxclk" }, };
-int soc_clk_dump(void) +int ast2600_clk_dump(struct udevice *dev)
static? apply for all below too.
M