As mx6sabreauto supports SPL now, all variants can boot using the same defconfig.
This patch: - Removes non-SPL targets. - Renames target to mx6sabreauto_defconfig. - Renames folder and board files to mx6sabreauto. - Updates MAINTAINERS, Makefile and Kconfig accordingly. - Removes .cfg files. - Adds a README with instructions to build and flash SPL and u-boot.img.
Signed-off-by: Vanessa Maegima vanessa.maegima@nxp.com --- arch/arm/cpu/armv7/mx6/Kconfig | 6 +- board/freescale/mx6qsabreauto/MAINTAINERS | 9 -- board/freescale/mx6qsabreauto/imximage.cfg | 129 ------------------ board/freescale/mx6qsabreauto/mx6dl.cfg | 130 ------------------ board/freescale/mx6qsabreauto/mx6qp.cfg | 145 --------------------- .../{mx6qsabreauto => mx6sabreauto}/Kconfig | 6 +- board/freescale/mx6sabreauto/MAINTAINERS | 7 + .../{mx6qsabreauto => mx6sabreauto}/Makefile | 2 +- board/freescale/mx6sabreauto/README | 20 +++ .../mx6sabreauto.c} | 0 configs/mx6dlsabreauto_defconfig | 44 ------- configs/mx6qpsabreauto_defconfig | 43 ------ configs/mx6qsabreauto_defconfig | 44 ------- ...reauto_spl_defconfig => mx6sabreauto_defconfig} | 2 +- .../configs/{mx6qsabreauto.h => mx6sabreauto.h} | 6 +- 15 files changed, 38 insertions(+), 555 deletions(-) delete mode 100644 board/freescale/mx6qsabreauto/MAINTAINERS delete mode 100644 board/freescale/mx6qsabreauto/imximage.cfg delete mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg delete mode 100644 board/freescale/mx6qsabreauto/mx6qp.cfg rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Kconfig (54%) create mode 100644 board/freescale/mx6sabreauto/MAINTAINERS rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Makefile (85%) create mode 100644 board/freescale/mx6sabreauto/README rename board/freescale/{mx6qsabreauto/mx6qsabreauto.c => mx6sabreauto/mx6sabreauto.c} (100%) delete mode 100644 configs/mx6dlsabreauto_defconfig delete mode 100644 configs/mx6qpsabreauto_defconfig delete mode 100644 configs/mx6qsabreauto_defconfig rename configs/{mx6qsabreauto_spl_defconfig => mx6sabreauto_defconfig} (97%) rename include/configs/{mx6qsabreauto.h => mx6sabreauto.h} (94%)
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 0d500aa..4a38dc2 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -202,8 +202,8 @@ config TARGET_MX6Q_ICORE_RQS select SUPPORT_SPL select SPL_LOAD_FIT
-config TARGET_MX6QSABREAUTO - bool "mx6qsabreauto" +config TARGET_MX6SABREAUTO + bool "mx6sabreauto" select BOARD_LATE_INIT select SUPPORT_SPL select DM @@ -413,7 +413,7 @@ source "board/engicam/icorem6/Kconfig" source "board/engicam/icorem6_rqs/Kconfig" source "board/engicam/isiotmx6ul/Kconfig" source "board/freescale/mx6qarm2/Kconfig" -source "board/freescale/mx6qsabreauto/Kconfig" +source "board/freescale/mx6sabreauto/Kconfig" source "board/freescale/mx6sabresd/Kconfig" source "board/freescale/mx6slevk/Kconfig" source "board/freescale/mx6sllevk/Kconfig" diff --git a/board/freescale/mx6qsabreauto/MAINTAINERS b/board/freescale/mx6qsabreauto/MAINTAINERS deleted file mode 100644 index f148dac..0000000 --- a/board/freescale/mx6qsabreauto/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -MX6QSABREAUTO BOARD -M: Fabio Estevam fabio.estevam@nxp.com -M: Peng Fan peng.fan@nxp.com -S: Maintained -F: board/freescale/mx6qsabreauto/ -F: include/configs/mx6qsabreauto.h -F: configs/mx6dlsabreauto_defconfig -F: configs/mx6qsabreauto_defconfig -F: configs/mx6qpsabreauto_defconfig diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg deleted file mode 100644 index 16bf473..0000000 --- a/board/freescale/mx6qsabreauto/imximage.cfg +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright (C) 2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ -/* image version */ - -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x020e0798 0x000C0000 -DATA 4 0x020e0758 0x00000000 -DATA 4 0x020e0588 0x00000030 -DATA 4 0x020e0594 0x00000030 -DATA 4 0x020e056c 0x00000030 -DATA 4 0x020e0578 0x00000030 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e057c 0x00000030 -DATA 4 0x020e058c 0x00000000 -DATA 4 0x020e059c 0x00000030 -DATA 4 0x020e05a0 0x00000030 -DATA 4 0x020e078c 0x00000030 -DATA 4 0x020e0750 0x00020000 -DATA 4 0x020e05a8 0x00000028 -DATA 4 0x020e05b0 0x00000028 -DATA 4 0x020e0524 0x00000028 -DATA 4 0x020e051c 0x00000028 -DATA 4 0x020e0518 0x00000028 -DATA 4 0x020e050c 0x00000028 -DATA 4 0x020e05b8 0x00000028 -DATA 4 0x020e05c0 0x00000028 -DATA 4 0x020e0774 0x00020000 -DATA 4 0x020e0784 0x00000028 -DATA 4 0x020e0788 0x00000028 -DATA 4 0x020e0794 0x00000028 -DATA 4 0x020e079c 0x00000028 -DATA 4 0x020e07a0 0x00000028 -DATA 4 0x020e07a4 0x00000028 -DATA 4 0x020e07a8 0x00000028 -DATA 4 0x020e0748 0x00000028 -DATA 4 0x020e05ac 0x00000028 -DATA 4 0x020e05b4 0x00000028 -DATA 4 0x020e0528 0x00000028 -DATA 4 0x020e0520 0x00000028 -DATA 4 0x020e0514 0x00000028 -DATA 4 0x020e0510 0x00000028 -DATA 4 0x020e05bc 0x00000028 -DATA 4 0x020e05c4 0x00000028 -DATA 4 0x021b0800 0xa1390003 -DATA 4 0x021b080c 0x001F001F -DATA 4 0x021b0810 0x001F001F -DATA 4 0x021b480c 0x001F001F -DATA 4 0x021b4810 0x001F001F -DATA 4 0x021b083c 0x43260335 -DATA 4 0x021b0840 0x031A030B -DATA 4 0x021b483c 0x4323033B -DATA 4 0x021b4840 0x0323026F -DATA 4 0x021b0848 0x483D4545 -DATA 4 0x021b4848 0x44433E48 -DATA 4 0x021b0850 0x41444840 -DATA 4 0x021b4850 0x4835483E -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 -DATA 4 0x021b481c 0x33333333 -DATA 4 0x021b4820 0x33333333 -DATA 4 0x021b4824 0x33333333 -DATA 4 0x021b4828 0x33333333 -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 -DATA 4 0x021b0004 0x00020036 -DATA 4 0x021b0008 0x09444040 -DATA 4 0x021b000c 0x8A8F7955 -DATA 4 0x021b0010 0xFF328F64 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b0018 0x00001740 -DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b002c 0x000026d2 -DATA 4 0x021b0030 0x008F1023 -DATA 4 0x021b0040 0x00000047 -DATA 4 0x021b0000 0x841A0000 -DATA 4 0x021b001c 0x04088032 -DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x00048031 -DATA 4 0x021b001c 0x09408030 -DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00011117 -DATA 4 0x021b4818 0x00011117 -DATA 4 0x021b0004 0x00025576 -DATA 4 0x021b0404 0x00011006 -DATA 4 0x021b001c 0x00000000 - -/* set the default clock gate to save power */ -DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC03 -DATA 4 0x020c4070 0x0FFFC000 -DATA 4 0x020c4074 0x3FF00000 -DATA 4 0x020c4078 0xFFFFF300 -DATA 4 0x020c407c 0x0F0000F3 -DATA 4 0x020c4080 0x00000FFF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4 0x020e0010 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4 0x020e0018 0x007F007F -DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg deleted file mode 100644 index 89078e5..0000000 --- a/board/freescale/mx6qsabreauto/mx6dl.cfg +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * Jason Liu r64343@freescale.com - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ -/* image version */ - -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x020e0774 0x000C0000 -DATA 4 0x020e0754 0x00000000 -DATA 4 0x020e04ac 0x00000030 -DATA 4 0x020e04b0 0x00000030 -DATA 4 0x020e0464 0x00000030 -DATA 4 0x020e0490 0x00000030 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e0494 0x00000030 -DATA 4 0x020e04a0 0x00000000 -DATA 4 0x020e04b4 0x00000030 -DATA 4 0x020e04b8 0x00000030 -DATA 4 0x020e076c 0x00000030 -DATA 4 0x020e0750 0x00020000 -DATA 4 0x020e04bc 0x00000028 -DATA 4 0x020e04c0 0x00000028 -DATA 4 0x020e04c4 0x00000028 -DATA 4 0x020e04c8 0x00000028 -DATA 4 0x020e04cc 0x00000028 -DATA 4 0x020e04d0 0x00000028 -DATA 4 0x020e04d4 0x00000028 -DATA 4 0x020e04d8 0x00000028 -DATA 4 0x020e0760 0x00020000 -DATA 4 0x020e0764 0x00000028 -DATA 4 0x020e0770 0x00000028 -DATA 4 0x020e0778 0x00000028 -DATA 4 0x020e077c 0x00000028 -DATA 4 0x020e0780 0x00000028 -DATA 4 0x020e0784 0x00000028 -DATA 4 0x020e078c 0x00000028 -DATA 4 0x020e0748 0x00000028 -DATA 4 0x020e0470 0x00000028 -DATA 4 0x020e0474 0x00000028 -DATA 4 0x020e0478 0x00000028 -DATA 4 0x020e047c 0x00000028 -DATA 4 0x020e0480 0x00000028 -DATA 4 0x020e0484 0x00000028 -DATA 4 0x020e0488 0x00000028 -DATA 4 0x020e048c 0x00000028 -DATA 4 0x021b0800 0xa1390003 -DATA 4 0x021b080c 0x001F001F -DATA 4 0x021b0810 0x001F001F -DATA 4 0x021b480c 0x001F001F -DATA 4 0x021b4810 0x001F001F -DATA 4 0x021b083c 0x42190217 -DATA 4 0x021b0840 0x017B017B -DATA 4 0x021b483c 0x4176017B -DATA 4 0x021b4840 0x015F016C -DATA 4 0x021b0848 0x4C4C4D4C -DATA 4 0x021b4848 0x4A4D4C48 -DATA 4 0x021b0850 0x3F3F3F40 -DATA 4 0x021b4850 0x3538382E -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 -DATA 4 0x021b481c 0x33333333 -DATA 4 0x021b4820 0x33333333 -DATA 4 0x021b4824 0x33333333 -DATA 4 0x021b4828 0x33333333 -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 -DATA 4 0x021b0004 0x00020025 -DATA 4 0x021b0008 0x00333030 -DATA 4 0x021b000c 0x676B5313 -DATA 4 0x021b0010 0xB66E8B63 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b0018 0x00001740 -DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b002c 0x000026d2 -DATA 4 0x021b0030 0x006B1023 -DATA 4 0x021b0040 0x00000047 -DATA 4 0x021b0000 0x841A0000 -DATA 4 0x021b001c 0x04008032 -DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x00048031 -DATA 4 0x021b001c 0x05208030 -DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00011117 -DATA 4 0x021b4818 0x00011117 -DATA 4 0x021b0004 0x00025565 -DATA 4 0x021b0404 0x00011006 -DATA 4 0x021b001c 0x00000000 - -/* set the default clock gate to save power */ -DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC03 -DATA 4 0x020c4070 0x0FFFC000 -DATA 4 0x020c4074 0x3FF00000 -DATA 4 0x020c4078 0xFFFFF300 -DATA 4 0x020c407c 0x0F0000C3 -DATA 4 0x020c4080 0x00000FFF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4 0x020e0010 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4 0x020e0018 0x007F007F -DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qsabreauto/mx6qp.cfg b/board/freescale/mx6qsabreauto/mx6qp.cfg deleted file mode 100644 index 2298c77..0000000 --- a/board/freescale/mx6qsabreauto/mx6qp.cfg +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ -/* image version */ - -#define __ASSEMBLY__ -#include <config.h> - -IMAGE_VERSION 2 - -/* - * Boot Device : one of spi, sd, eimnor, nand, sata: - * spinor: flash_offset: 0x0400 - * nand: flash_offset: 0x0400 - * sata: flash_offset: 0x0400 - * sd/mmc: flash_offset: 0x0400 - * eimnor: flash_offset: 0x1000 - */ -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x020e0798 0x000C0000 -DATA 4 0x020e0758 0x00000000 -DATA 4 0x020e0588 0x00000030 -DATA 4 0x020e0594 0x00000030 -DATA 4 0x020e056c 0x00000030 -DATA 4 0x020e0578 0x00000030 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e057c 0x00000030 -DATA 4 0x020e058c 0x00000000 -DATA 4 0x020e059c 0x00000030 -DATA 4 0x020e05a0 0x00000030 -DATA 4 0x020e078c 0x00000030 -DATA 4 0x020e0750 0x00020000 -DATA 4 0x020e05a8 0x00000030 -DATA 4 0x020e05b0 0x00000030 -DATA 4 0x020e0524 0x00000030 -DATA 4 0x020e051c 0x00000030 -DATA 4 0x020e0518 0x00000030 -DATA 4 0x020e050c 0x00000030 -DATA 4 0x020e05b8 0x00000030 -DATA 4 0x020e05c0 0x00000030 -DATA 4 0x020e0774 0x00020000 -DATA 4 0x020e0784 0x00000030 -DATA 4 0x020e0788 0x00000030 -DATA 4 0x020e0794 0x00000030 -DATA 4 0x020e079c 0x00000030 -DATA 4 0x020e07a0 0x00000030 -DATA 4 0x020e07a4 0x00000030 -DATA 4 0x020e07a8 0x00000030 -DATA 4 0x020e0748 0x00000030 -DATA 4 0x020e05ac 0x00000030 -DATA 4 0x020e05b4 0x00000030 -DATA 4 0x020e0528 0x00000030 -DATA 4 0x020e0520 0x00000030 -DATA 4 0x020e0514 0x00000030 -DATA 4 0x020e0510 0x00000030 -DATA 4 0x020e05bc 0x00000030 -DATA 4 0x020e05c4 0x00000030 -DATA 4 0x021b0800 0xa1390003 -DATA 4 0x021b080c 0x001b001e -DATA 4 0x021b0810 0x002e0029 -DATA 4 0x021b480c 0x001b002a -DATA 4 0x021b4810 0x0019002c -DATA 4 0x021b083c 0x43240334 -DATA 4 0x021b0840 0x0324031a -DATA 4 0x021b483c 0x43340344 -DATA 4 0x021b4840 0x03280276 -DATA 4 0x021b0848 0x44383A3E -DATA 4 0x021b4848 0x3C3C3846 -DATA 4 0x021b0850 0x2e303230 -DATA 4 0x021b4850 0x38283E34 -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 -DATA 4 0x021b481c 0x33333333 -DATA 4 0x021b4820 0x33333333 -DATA 4 0x021b4824 0x33333333 -DATA 4 0x021b4828 0x33333333 -DATA 4 0x021b08c0 0x24912492 -DATA 4 0x021b48c0 0x24912492 -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 -DATA 4 0x021b0004 0x00020036 -DATA 4 0x021b0008 0x09444040 -DATA 4 0x021b000c 0x898E7955 -DATA 4 0x021b0010 0xFF328F64 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b0018 0x00001740 -DATA 4 0x021b001c 0x00008000 - -DATA 4 0x021b002c 0x000026d2 -DATA 4 0x021b0030 0x008E1023 -DATA 4 0x021b0040 0x00000047 -DATA 4 0x021b0400 0x14420000 -DATA 4 0x021b0000 0x841A0000 -DATA 4 0x00bb0008 0x00000004 -DATA 4 0x00bb000c 0x2891E41A -DATA 4 0x00bb0038 0x00000564 -DATA 4 0x00bb0014 0x00000040 -DATA 4 0x00bb0028 0x00000020 -DATA 4 0x00bb002c 0x00000020 -DATA 4 0x021b001c 0x04088032 -DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x00048031 -DATA 4 0x021b001c 0x09408030 -DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00011117 -DATA 4 0x021b4818 0x00011117 -DATA 4 0x021b0004 0x00025576 -DATA 4 0x021b0404 0x00011006 -DATA 4 0x021b001c 0x00000000 -/* set the default clock gate to save power */ -DATA 4, 0x020c4068, 0x00C03F3F -DATA 4, 0x020c406c, 0x0030FC03 -DATA 4, 0x020c4070, 0x0FFFC000 -DATA 4, 0x020c4074, 0x3FF00000 -DATA 4, 0x020c4078, 0xFFFFF300 -DATA 4, 0x020c407c, 0x0F0000F3 -DATA 4, 0x020c4080, 0x00000FFF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4, 0x020e0010, 0xF00000CF -/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */ -DATA 4, 0x020e0018, 0x77177717 -DATA 4, 0x020e001c, 0x77177717 diff --git a/board/freescale/mx6qsabreauto/Kconfig b/board/freescale/mx6sabreauto/Kconfig similarity index 54% rename from board/freescale/mx6qsabreauto/Kconfig rename to board/freescale/mx6sabreauto/Kconfig index e579c0f..5b4faf6 100644 --- a/board/freescale/mx6qsabreauto/Kconfig +++ b/board/freescale/mx6sabreauto/Kconfig @@ -1,12 +1,12 @@ -if TARGET_MX6QSABREAUTO +if TARGET_MX6SABREAUTO
config SYS_BOARD - default "mx6qsabreauto" + default "mx6sabreauto"
config SYS_VENDOR default "freescale"
config SYS_CONFIG_NAME - default "mx6qsabreauto" + default "mx6sabreauto"
endif diff --git a/board/freescale/mx6sabreauto/MAINTAINERS b/board/freescale/mx6sabreauto/MAINTAINERS new file mode 100644 index 0000000..a89f05a --- /dev/null +++ b/board/freescale/mx6sabreauto/MAINTAINERS @@ -0,0 +1,7 @@ +MX6SABREAUTO BOARD +M: Fabio Estevam fabio.estevam@nxp.com +M: Peng Fan peng.fan@nxp.com +S: Maintained +F: board/freescale/mx6sabreauto/ +F: include/configs/mx6sabreauto.h +F: configs/mx6sabreauto_defconfig diff --git a/board/freescale/mx6qsabreauto/Makefile b/board/freescale/mx6sabreauto/Makefile similarity index 85% rename from board/freescale/mx6qsabreauto/Makefile rename to board/freescale/mx6sabreauto/Makefile index ac5bc81..87f4ec0 100644 --- a/board/freescale/mx6qsabreauto/Makefile +++ b/board/freescale/mx6sabreauto/Makefile @@ -6,4 +6,4 @@ # SPDX-License-Identifier: GPL-2.0+ #
-obj-y := mx6qsabreauto.o +obj-y := mx6sabreauto.o diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README new file mode 100644 index 0000000..7e4596a --- /dev/null +++ b/board/freescale/mx6sabreauto/README @@ -0,0 +1,20 @@ +How to use and build U-Boot on mx6sabreauto +------------------------------------------- + +mx6sabreauto_defconfig target supports mx6q/mx6dl/mx6qp sabreauto variants. + +In order to build it: + +$ make mx6sabreauto_defconfig + +$ make + +This will generate the SPL and u-boot.img binaries. + +- Flash the SPL binary into the SD card: + +$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync + +- Flash the u-boot.img binary into the SD card: + +$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c similarity index 100% rename from board/freescale/mx6qsabreauto/mx6qsabreauto.c rename to board/freescale/mx6sabreauto/mx6sabreauto.c diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig deleted file mode 100644 index ba5ab8a..0000000 --- a/configs/mx6dlsabreauto_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_TARGET_MX6QSABREAUTO=y -CONFIG_VIDEO=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL" -CONFIG_BOOTDELAY=3 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_DFU_MMC=y -CONFIG_DFU_SF=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="FSL" -CONFIG_G_DNL_VENDOR_NUM=0x0525 -CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 -# CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/mx6qpsabreauto_defconfig b/configs/mx6qpsabreauto_defconfig deleted file mode 100644 index 96a248e..0000000 --- a/configs/mx6qpsabreauto_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_TARGET_MX6QSABREAUTO=y -CONFIG_VIDEO=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6qp.cfg,MX6Q" -CONFIG_BOOTDELAY=3 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_DFU_MMC=y -CONFIG_DFU_SF=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="FSL" -CONFIG_G_DNL_VENDOR_NUM=0x0525 -CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 -# CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig deleted file mode 100644 index 015207d..0000000 --- a/configs/mx6qsabreauto_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_TARGET_MX6QSABREAUTO=y -CONFIG_VIDEO=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q" -CONFIG_BOOTDELAY=3 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_DFU_MMC=y -CONFIG_DFU_SF=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="FSL" -CONFIG_G_DNL_VENDOR_NUM=0x0525 -CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 -# CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/mx6qsabreauto_spl_defconfig b/configs/mx6sabreauto_defconfig similarity index 97% rename from configs/mx6qsabreauto_spl_defconfig rename to configs/mx6sabreauto_defconfig index ce2d1d2..c1b3bbf 100644 --- a/configs/mx6qsabreauto_spl_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_TARGET_MX6QSABREAUTO=y +CONFIG_TARGET_MX6SABREAUTO=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6sabreauto.h similarity index 94% rename from include/configs/mx6qsabreauto.h rename to include/configs/mx6sabreauto.h index 99b48ca..fd0d5ce 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -6,8 +6,8 @@ * SPDX-License-Identifier: GPL-2.0+ */
-#ifndef __MX6QSABREAUTO_CONFIG_H -#define __MX6QSABREAUTO_CONFIG_H +#ifndef __MX6SABREAUTO_CONFIG_H +#define __MX6SABREAUTO_CONFIG_H
#ifdef CONFIG_SPL #include "imx6_spl.h" @@ -76,4 +76,4 @@ #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-#endif /* __MX6QSABREAUTO_CONFIG_H */ +#endif /* __MX6SABREAUTO_CONFIG_H */