DESC: clean Makefile, change configuration setting
why? because XupV2p use new emac drivers
Signed-off-by: Michal Simek monstr@monstr.eu
diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile index 9ab5633..99e7047 100644 --- a/board/xilinx/xupv2p/Makefile +++ b/board/xilinx/xupv2p/Makefile @@ -22,32 +22,17 @@ #
include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -$(shell mkdir -p $(obj)../xilinx_enet) -endif - -INCS := -I../common -I../xilinx_enet -CFLAGS += $(INCS) -HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o \ - ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \ - ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \ - ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \ - ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \ - ../common/xbasic_types.o ../common/xdma_channel.o \ - ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \ - ../common/xversion.o \ +COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $^ +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS)
clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk index c07b0b3..eedfb24 100644 --- a/board/xilinx/xupv2p/config.mk +++ b/board/xilinx/xupv2p/config.mk @@ -25,8 +25,8 @@ # Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 #
-TEXT_BASE = 0x38000000 +TEXT_BASE = 0x30000000
+PLATFORM_CPPFLAGS += -mxl-pattern-compare PLATFORM_CPPFLAGS += -mno-xl-soft-mul -PLATFORM_CPPFLAGS += -mno-xl-soft-div -PLATFORM_CPPFLAGS += -mxl-barrel-shift +PLATFORM_CPPFLAGS += -mcpu=v5.00.c diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h index a96c693..0bb7a80 100644 --- a/board/xilinx/xupv2p/xparameters.h +++ b/board/xilinx/xupv2p/xparameters.h @@ -28,17 +28,24 @@ /* System Clock Frequency */ #define XILINX_CLOCK_FREQ 100000000
+/* Microblaze is microblaze_0 */ +#define XILINX_USE_MSR_INSTR 1 +#define XILINX_PVR 0 +#define XILINX_FSL_NUMBER 0 + /* Interrupt controller is opb_intc_0 */ #define XILINX_INTC_BASEADDR 0x41200000 -#define XILINX_INTC_NUM_INTR_INPUTS 11 +#define XILINX_INTC_NUM_INTR_INPUTS 7
/* Timer pheriphery is opb_timer_1 */ #define XILINX_TIMER_BASEADDR 0x41c00000 -#define XILINX_TIMER_IRQ 1 +#define XILINX_TIMER_IRQ 0
/* Uart pheriphery is RS232_Uart_1 */ -#define XILINX_UART_BASEADDR 0x40600000 -#define XILINX_UART_BAUDRATE 115200 +#define XILINX_UARTLITE_BASEADDR 0x40600000 +#define XILINX_UARTLITE_BAUDRATE 115200 + +/* IIC doesn't exist */
/* GPIO is LEDs_4Bit*/ #define XILINX_GPIO_BASEADDR 0x40000000 @@ -51,14 +58,10 @@
/* Sysace Controller is SysACE_CompactFlash */ #define XILINX_SYSACE_BASEADDR 0x41800000 -#define XILINX_SYSACE_HIGHADDR 0x4180ffff #define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */ -#define XPAR_XEMAC_NUM_INSTANCES 1 -#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 -#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000 -#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff -#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 -#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 -#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 +#define XILINX_EMAC_BASEADDR 0x40c00000 +#define XILINX_EMAC_DMA_PRESENT 3 +#define XILINX_EMAC_HALF_DUPLEX_EXIST 1 +#define XILINX_EMAC_MII_EXIST 1 diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index 35001d7..006a132 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -31,13 +31,34 @@ #define CONFIG_XUPV2P 1
/* uart */ -#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR -#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE +#ifdef XILINX_UARTLITE_BASEADDR +#define XILINX_UARTLITE +#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR +#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#else +#ifdef XILINX_UART16550_BASEADDR +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR +#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 115200 } +#endif +#endif
/* ethernet */ -#define CONFIG_EMAC 1 -#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES +#ifdef XILINX_EMAC_BASEADDR +#define XILINX_EMAC 1 +#else +#ifdef XILINX_EMACLITE_BASEADDR +#define XILINX_EMACLITE 1 +#endif +#endif +#undef ET_DEBUG
/* * setting reset address @@ -48,11 +69,13 @@ * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. */ -#define CFG_RESET_ADDRESS 0x36000000 +/* #define CFG_RESET_ADDRESS 0x36000000 */
/* gpio */ +#ifdef XILINX_GPIO_BASEADDR #define CFG_GPIO_0 1 #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR +#endif
/* interrupt controller */ #define CFG_INTC_0 1 @@ -119,7 +142,6 @@ #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
- /* * BOOTP options */ @@ -128,29 +150,24 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME
- /* * Command line configuration. */ #include <config_cmd_default.h>
-#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_NET -#define CONFIG_CMD_IMI -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_RUN -#define CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MISC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MFSL #define CONFIG_CMD_PING
+#ifdef XILINX_SYSACE_BASEADDR +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#endif
/* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " @@ -162,7 +179,7 @@
#define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME "ml401" +#define CONFIG_HOSTNAME "xupv2p" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 @@ -178,11 +195,13 @@ "echo"
/* system ace */ +#ifdef XILINX_SYSACE_BASEADDR #define CONFIG_SYSTEMACE /* #define DEBUG_SYSTEMACE */ #define SYSTEMACE_CONFIG_FPGA #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH #define CONFIG_DOS_PARTITION +#endif
#endif /* __CONFIG_H */