From: peteryin peter.yin@quantatw.com
Create minerva initial file.
Signed-off-by: peteryin peter.yin@quantatw.com --- arch/arm/mach-aspeed/ast2600/Kconfig | 8 ++ board/aspeed/meta_ast2600/Kconfig | 13 ++ board/aspeed/meta_ast2600/Makefile | 1 + .../meta_ast2600/meta_minerva_ast2600.c | 130 ++++++++++++++++++ 4 files changed, 152 insertions(+) create mode 100644 board/aspeed/meta_ast2600/Kconfig create mode 100644 board/aspeed/meta_ast2600/Makefile create mode 100644 board/aspeed/meta_ast2600/meta_minerva_ast2600.c
diff --git a/arch/arm/mach-aspeed/ast2600/Kconfig b/arch/arm/mach-aspeed/ast2600/Kconfig index f5852afa77..444990e2e3 100644 --- a/arch/arm/mach-aspeed/ast2600/Kconfig +++ b/arch/arm/mach-aspeed/ast2600/Kconfig @@ -51,6 +51,13 @@ config TARGET_QUALCOMM_DC_SCM_V1 QUALCOMM-DC-SCM-V1 is a Qualcomm DC-SCM V1 board which is equipped with AST2600.
+config TARGET_META_MINERVA_AST2600 + bool "META-MINERVA-AST2600" + depends on ASPEED_AST2600 + help + META-MINERVA-AST2600 is META openbmc minerva board for AST2600A3 chip. + + endchoice
source "board/aspeed/evb_ast2600/Kconfig" @@ -59,5 +66,6 @@ source "board/aspeed/slt_ast2600/Kconfig" source "board/aspeed/ast2600_ibm/Kconfig" source "board/aspeed/ast2600_intel/Kconfig" source "board/qualcomm/dc-scm-v1/Kconfig" +source "board/aspeed/meta_ast2600/Kconfig"
endif diff --git a/board/aspeed/meta_ast2600/Kconfig b/board/aspeed/meta_ast2600/Kconfig new file mode 100644 index 0000000000..adc5b58733 --- /dev/null +++ b/board/aspeed/meta_ast2600/Kconfig @@ -0,0 +1,13 @@ +if TARGET_META_MINERVA_AST2600 + +config SYS_BOARD + default "meta_ast2600" + +config SYS_VENDOR + default "aspeed" + +config SYS_CONFIG_NAME + string "board configuration name" + default "meta_minerva_ast2600" + +endif diff --git a/board/aspeed/meta_ast2600/Makefile b/board/aspeed/meta_ast2600/Makefile new file mode 100644 index 0000000000..b5a526efa5 --- /dev/null +++ b/board/aspeed/meta_ast2600/Makefile @@ -0,0 +1 @@ +obj-y += meta_minerva_ast2600.o diff --git a/board/aspeed/meta_ast2600/meta_minerva_ast2600.c b/board/aspeed/meta_ast2600/meta_minerva_ast2600.c new file mode 100644 index 0000000000..d0b3720da3 --- /dev/null +++ b/board/aspeed/meta_ast2600/meta_minerva_ast2600.c @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) ASPEED Technology Inc. + */ +#include <common.h> +#include <asm/io.h> + +#define SCU_BASE (0x1e6e2000) +#define ESPI_BASE (0x1e6ee000) +#define LPC_BASE (0x1e789000) +#define LPC_HICR5 (LPC_BASE + 0x80) +#define LPC_HICR6 (LPC_BASE + 0x84) +#define LPC_SNPWADR (LPC_BASE + 0x90) +#define LPC_HICRB (LPC_BASE + 0x100) +#define LPC_PCCR0 (LPC_BASE | 0x130) + +#define SCU_MUTI_FN_PIN_CTRL5 (SCU_BASE | 0x414) +#define SCU_MUTI_FN_PIN_CTRL7 (SCU_BASE | 0x41C) +#define SCU_MUTI_FN_PIN_CTRL9 (SCU_BASE | 0x434) +#define SCU_MUTI_FN_PIN_CTRL15 (SCU_BASE | 0x454) +#define SCU_PIN_CONTROL8_REG (SCU_BASE | 0x430) +#define SCU_HW_STRAP2_SET_REG (SCU_BASE | 0x510) +#define SCU_HW_STRAP2_CLR_REG (SCU_BASE | 0x514) +#define SCU_HW_STRAP3_REG (SCU_BASE | 0x51C) + +#define ENABLE_GPIO_PASSTHROUGH BIT(9) +#define GPIO_BASE (0x1e780000) +#define GPIO_ABCD_BASE_REG (GPIO_BASE | 0x000) +#define GPIO_ABCD_DATA_REG (GPIO_ABCD_BASE_REG) +#define GPIO_ABCD_DIR_REG (GPIO_BASE | 0x004) + +#define GPIO_EFGH_BASE_REG (GPIO_BASE | 0x020) +#define GPIO_EFGH_DATA_REG (GPIO_EFGH_BASE_REG) +#define GPIO_EFGH_DIR_REG (GPIO_BASE | 0x024) + +#define GPIO_IJKL_BASE_REG (GPIO_BASE | 0x070) +#define GPIO_IJKL_DATA_REG (GPIO_IJKL_BASE_REG) +#define GPIO_IJKL_DIR_REG (GPIO_BASE | 0x074) + +#define GPIO_MNOP_BASE_REG (GPIO_BASE | 0x078) +#define GPIO_MNOP_DATA_REG (GPIO_MNOP_BASE_REG) +#define GPIO_MNOP_DIR_REG (GPIO_BASE | 0x07C) +#define GPIO_MNOP_CMD_SOURCE0 (GPIO_BASE | 0x0E0) +#define GPIO_MNOP_CMD_SOURCE1 (GPIO_BASE | 0x0E4) + +#define GPIO_QRST_BASE_REG (GPIO_BASE | 0x080) +#define GPIO_QRST_DATA_REG (GPIO_QRST_BASE_REG) +#define GPIO_QRST_DIR_REG (GPIO_BASE | 0x084) + +#define GPIO_UVWX_BASE_REG (GPIO_BASE | 0x088) +#define GPIO_UVWX_DATA_REG (GPIO_UVWX_BASE_REG) +#define GPIO_UVWX_DIR_REG (GPIO_BASE | 0x08C) + +#define GPIO_NAME(base, pin) (1 << (pin + (base - 'A') % 4 * 8)) +#define GPIO_GROUP(base, val) (val << ((base - 'A') % 4 * 8)) +#define SIO_ADDR_4E (0x4E) +#define SIO_ADDR_2E (0x2E) + +static void __maybe_unused el_espi_init(void) +{ + u32 value = 0; + + //SCU514: SCU514: Hardware Strap2 Clear Register (default) + //SCU510 [6]:0 eSPI mode + setbits_le32(SCU_HW_STRAP2_CLR_REG, BIT(6)); + + //SCU434: Multi-function Pin Control #9 (default) + setbits_le32(SCU_MUTI_FN_PIN_CTRL9, 0xFF << 16); + + //SCU454: Multi-function Pin Control #15 + value = readl(SCU_MUTI_FN_PIN_CTRL15); + value &= 0x00FFFFFF; //Clear BIT[31:24] + value |= 0xAA000000; //BIT[31:24] = LAD3ESPID3~0 Driving Strength + writel(value, SCU_MUTI_FN_PIN_CTRL15); + + //ESPI000: Engine Control + setbits_le32(ESPI_BASE, 1 << 4); +} + +// SNOOP SET +void el_port80_init(u32 reg_dir, u32 reg_val, + u32 cmd_source0, u32 cmd_source1) +{ + u32 value = 0; + + //GPIO Output Settings + setbits_le32(reg_dir, reg_val); + + //Command Source0 = 1 + //Command Source1 = 0 + setbits_le32(cmd_source0, BIT(8)); + clrbits_le32(cmd_source1, BIT(8)); + + //SNPWADR(0x90): LPC Snoop Address Register + value = readl(LPC_SNPWADR); + value &= 0xFFFF0000; //BIT[15:0] - clear; + value |= 0x00000080; //BIT[15:0] - set; + writel(value, LPC_SNPWADR); + //HICR5(0x80): Host Interface Control Register 5 + value = readl(LPC_HICR5); + value |= 1; //Enable snooping address #0 + value &= ~0xA; + writel(value, LPC_HICR5); + + //HICRB(0x100): Host Interface Control Register B + //EnSNP0D: Enable ACCEPT response code for snoop #0 commands, + //defined in HICR5[0], in eSPI mode. + setbits_le32(LPC_HICRB, BIT(14)); + + writel(0, LPC_PCCR0); +} + +//Super IO Settings +void el_superio_decoder(uint8_t addr) +{ + //Enable LPC to decode SuperIO 0x2E/0x4E address + setbits_le32(SCU_HW_STRAP2_CLR_REG, BIT(2)); + + //SuperIO configuration address selection (0 = 0x2E(Default) / 1 = 0x4E) + if (addr == 0x4E) + setbits_le32(SCU_HW_STRAP2_SET_REG, BIT(2)); +} + +int board_early_init_f(void) +{ + clrbits_le32(SCU_HW_STRAP3_REG, ENABLE_GPIO_PASSTHROUGH); + el_espi_init(); + el_superio_decoder(SIO_ADDR_2E); + return 0; +}