On 25.10.22 10:50, Oliver Graute wrote:
On 24/10/22, Stefano Babic wrote:
On 24.10.22 13:59, Oliver Graute wrote:
On 24/10/22, Stefano Babic wrote:
On 24.10.22 13:37, Fabio Estevam wrote:
Hi Stefano and Oliver,
On Tue, May 3, 2022 at 7:49 AM Oliver Graute oliver.graute@kococonnector.com wrote:
Switch to use binman to pack images
Signed-off-by: Oliver Graute oliver.graute@kococonnector.com Reviewed-by: Fabio Estevam festevam@denx.de Reviewed-by: Simon Glass sjg@chromium.org
Changes for v3 -added Reviewed-by -rebased on master
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 + arch/arm/mach-imx/imx8/Kconfig | 1 + board/congatec/cgtqmx8/imximage.cfg | 4 ++-- configs/cgtqmx8_defconfig | 2 +- doc/board/congatec/cgtqmx8.rst | 3 +-- 5 files changed, 6 insertions(+), 5 deletions(-)Just realized that v3 does not include imx8qm-u-boot.dtsi and this breaks CI.
Right - as well as V4, this is what I tried to merge and breaks. I have drop it.
The previous v2 did include it: https://patchwork.ozlabs.org/project/uboot/patch/20220221090139.10066-1-oliv...
Thanks for noting this - Oliver, can you check and repost a V5, then ?
The arch/arm/dts/imx8qm-u-boot.dtsi is applied on the binman Patch for "PATCH v3 imx: imx8qm-rom7720: switch to binman"
So if you first apply the patches for the imx8qm-rom7720 Board it should work.
Ok, thanks for tipp - I apply both and will test again
I saw the CI Pipeline failing. Perhaps the reason is a missing CONFIG_FIT_EXTERNAL_OFFSET?
I see this, but just applying the two patches, multiple boards are broken: imx8qm_rom7720_a1_4G cgtqmx8 imx8qm_mek imx8qxp_mek deneb giedi
+++ b/configs/cgtqmx8_defconfig @@ -20,6 +20,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set
Can you confirm?
I let CI run just to see if cgtqmx8 is fixed.
Stefano