
Hi Thierry,
On Fri, Nov 23, 2012 at 2:58 AM, Thierry Reding thierry.reding@avionic-design.de wrote:
The TEC ships with a 7" LCD panel that provides a resolution of 800x480 pixels. Add a corresponding panel description to the device tree and enable LCD support in the configuration.
Signed-off-by: Thierry Reding thierry.reding@avionic-design.de
board/avionic-design/dts/tegra20-tec.dts | 32 ++++++++++++++++++++++++++++++++ include/configs/tec.h | 15 ++++++++++++++- 2 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts index 50ea3b5..cdb7527 100644 --- a/board/avionic-design/dts/tegra20-tec.dts +++ b/board/avionic-design/dts/tegra20-tec.dts @@ -24,6 +24,19 @@ }; };
host1x {
status = "okay";
dc@54200000 {
status = "okay";
rgb {
nvidia,panel = <&lcd_panel>;
status = "okay";
};
};
};
clock@60006000 { clocks = <&clk_32k &osc>; };
@@ -66,4 +79,23 @@ compatible = "hynix,hy27uf4g2b", "nand-flash"; }; };
lcd_panel: panel {
clock = <33260000>;
xres = <800>;
yres = <480>;
left-margin = <120>;
right-margin = <120>;
hsync-len = <16>;
lower-margin = <15>;
upper-margin = <15>;
vsync-len = <15>;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 500000>;
nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
nvidia,panel-timings = <0 0 0 0>;
};
}; diff --git a/include/configs/tec.h b/include/configs/tec.h index 200cf66..815afa6 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -36,13 +36,13 @@ /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" -#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011
This has an unrelated patch, but I guess that doesn't matter.
/* Board-specific serial config */ #define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT
/* SD/MMC */ #define CONFIG_MMC @@ -85,6 +85,19 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm"
+#undef TEGRA_DEVICE_SETTINGS +#define TEGRA_DEVICE_SETTINGS \
"stdin=serial\0" \
"stdout=serial,lcd\0" \
"stderr=serial,lcd\0"
+/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
1.8.0
Regards, Simon