Unit addresses are not allowed anymore in a FIT image since
commit 3f04db891a35 ("image: Check for unit addresses in FITs")
This caused this error on mkimage creation:
./tools/mkimage: verify_header failed for FIT Image support with exit code 1 Makefile:1393: recipe for target 'u-boot.itb' failed make: *** [u-boot.itb] Error 1
replacing @ with hyphen solved the issue
Signed-off-by: Oliver Graute oliver.graute@kococonnector.com Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Simon Glass sjg@chromium.org Cc: uboot-imx uboot-imx@nxp.com --- arch/arm/mach-imx/mkimage_fit_atf.sh | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh index fe12b7bb4b..c5fb9b0fc3 100755 --- a/arch/arm/mach-imx/mkimage_fit_atf.sh +++ b/arch/arm/mach-imx/mkimage_fit_atf.sh @@ -53,7 +53,7 @@ cat << __HEADER_EOF description = "Configuration to load ATF before U-Boot";
images { - uboot@1 { + uboot-1 { description = "U-Boot (64-bit)"; os = "u-boot"; data = /incbin/("$BL33"); @@ -68,7 +68,7 @@ cnt=1 for dtname in $* do cat << __FDT_IMAGE_EOF - fdt@$cnt { + fdt-$cnt { description = "$(basename $dtname .dtb)"; data = /incbin/("$dtname"); type = "flat_dt"; @@ -79,7 +79,7 @@ cnt=$((cnt+1)) done
cat << __HEADER_EOF - atf@1 { + atf-1 { description = "ARM Trusted Firmware"; os = "arm-trusted-firmware"; data = /incbin/("$BL31"); @@ -93,7 +93,7 @@ __HEADER_EOF
if [ -f $BL32 ]; then cat << __HEADER_EOF - tee@1 { + tee-1 { description = "TEE firmware"; data = /incbin/("$BL32"); type = "firmware"; @@ -108,7 +108,7 @@ fi cat << __CONF_HEADER_EOF }; configurations { - default = "config@1"; + default = "config-1";
__CONF_HEADER_EOF
@@ -117,20 +117,20 @@ for dtname in $* do if [ -f $BL32 ]; then cat << __CONF_SECTION_EOF - config@$cnt { + config-$cnt { description = "$(basename $dtname .dtb)"; - firmware = "uboot@1"; - loadables = "atf@1", "tee@1"; + firmware = "uboot-1"; + loadables = "atf-1", "tee-1"; fdt = "fdt@$cnt"; }; __CONF_SECTION_EOF else cat << __CONF_SECTION1_EOF - config@$cnt { + config-$cnt { description = "$(basename $dtname .dtb)"; - firmware = "uboot@1"; - loadables = "atf@1"; - fdt = "fdt@$cnt"; + firmware = "uboot-1"; + loadables = "atf-1"; + fdt = "fdt-$cnt"; }; __CONF_SECTION1_EOF fi